• International journal of advanced smart convergence
• /
• v.8 no.4
• /
• pp.179-187
• /
• 2019

Vehicular density is usually low in a highway environment. Consequently, connectivity of the vehicular ad hoc networks (VANETs) might be poor. We are investigating the problem of deploying the approximation optimal roadside units (RSUs) on the highway covered by VANETs, which employs VANETs to provide excellent connectivity. The goal is to estimate the minimal number of deployed RSUs to guarantee the connectivity probability of the VANET within a given threshold considering that RSUs are to be allocated equidistantly. We apply an approximation algorithm to distribute RSUs locations in the VANETs. Thereafter, performance of the proposed scheme is evaluated by calculating the connectivity probability of the VANET. The simulation results show that there is the threshold value M of implemented RSUs corresponding to each vehicular network with N vehicles. The connectivity probability increases slowly with the number of RSUs getting larger.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.5
• /
• pp.76-84
• /
• 1994

Recently, Optical BJTC as a new approach for real-time multi-target tracking has been intensively studied. But the conventional system has some problems in the practical applications such as the false alarm and target missing and low correlation efficiency, and these poor performances are analyzed to be deeply dependent on the binarization method. So, in this paper, a new BJTC system which has the improved performances in target discrimination and diffraction efficiency is suggested, which is based on the JTPS having the same properties with those of the matched filter and new power spectrum binarization method to use effectively the high frequency components of the JTPS signal. Through the computer simulation and some experiments, the performances of the new BJTC tracking system are analyzed and proved to be superior to those of the conventional system baseds on Median method in multi- target tracking problems.

• International Journal of Contents
• /
• v.7 no.3
• /
• pp.1-5
• /
• 2011

It has been an interesting challenge to find a good classifier for imbalanced data, since it is pervasive but a difficult problem to solve. However, classifiers developed with the assumption of well-balanced class distributions show poor classification performance for the imbalanced data. Among many approaches to the imbalanced data problems, the algorithmic level approach is attractive because it can be applied to the other approaches such as data level or ensemble approaches. Especially, the error back-propagation algorithm using the target node method, which can change the amount of weight-updating with regards to the target node of each class, attains good performances in the imbalanced data problems. In this paper, we analyze the relationship between two optimal outputs of neural network classifier trained with the target node method. Also, the optimal relationship is compared with those of the other error function methods such as mean-squared error and the n-th order extension of cross-entropy error. The analyses are verified through simulations on a thyroid data set.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2002.11a
• /
• pp.36-46
• /
• 2002

The accurate characterization of paper structure may provide critical information for ideal selection of raw materials and papermaking processes as well as for predicting the behavior and the quality of final paper products. In this study, local paper structure and the relationship among the structural parameters, thickness, grammage, apparent density and surface roughness of various handsheet and commercial paper samples were evaluated by using recently developed methods. A new concept of surface roughness was also introduced. The results demonstrate that there is significant overestimation in the measured thickness when using the conventional caliper method that originates from the surface roughness and poor paper formation. A novel non-contact thickness tester, referred to as the twin laser profilometer(TLP), provided results that were not subject to these artifacts and thus provided the local intrinsic thickness and consequently the local intrinsic apparent density.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.28-34
• /
• 1986

The frequency synthesizer for Fast Frequency Hopping System musy be capable of a fast tuning with a small step frequency over wide band. The most conventional frequency synthesizer that uses the phase locked loop (PLL) enables the wide band problem but have a poor side of the low resolution and the transient response. In this paper, we have discussed the experimental results of a direct digital frequency synthesizer which can be applicable to the Fast Frequency Hopping System, using digital-to-analoq (D/A)conversion techniques. With this system we can find the merits of a fine resolution and the possibility of a fast tuning leaving the problems of transent frequency.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.1
• /
• pp.72-79
• /
• 1997

Most open magnetic resonance imaging systems have used the planar gradient coils whose inductances were minimized through the magnetic energy minimization procedure in the spatial frequency domain. Though the planar gradient coils have smaller inductance than conventional gradient coils, the planar gradient coils often suffer from their poor magnetic field linearity. Scaling the spatial frequencies of the current density function designed by the magnetic energy minimization, magnetic field linearity of the planar gradient coils can be greatly improved with small sacrifice of gradient coil inductance. We have found that the figure of merit of the planar gradient coils, defined by the gradient strength divided by the linearity error and the inductance, can be improved by proposed technique.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.381-385
• /
• 1999

As an example of many possible applications of OSMI data, we present a method to detect red tides. In Korean waters, red tides usually occur in the South Sea where the turbidity is usually high due to strong tidal mixing in the shallow sea. The conventional case 1 chlorophyll algorithm cannot be applied since it cannot distinguish chlorophyll from SS (suspended sediments). In October 1998, a red tide outbreak occurred off the coast of Kunsan. We analyzed the SeaWiFS data of the outbreak. The standard SeaWiFS chlorophyll algorithm OC2 was poor in identifying the red tides. However, comparison of spectra of normalized water-leaving radiance indicates that red tide pixels can be distinguished from sediment-laden pixels. Channel 443 and 555 were effective in showing the spectral characteristics. We suggest K490 algorithm as an example in summarizing the information of the spectra and thereby in distinguishing the red tide pixels. Further development is desirable.

• The Journal of Korea Robotics Society
• /
• v.7 no.2
• /
• pp.142-149
• /
• 2012

The camera has limitations of poor visibility in underwater environment due to the limited light source and medium noise of the environment. However, its usefulness in close range has been proved in many studies, especially for navigation. Thus, in this paper, vision-based object detection and tracking techniques using artificial objects for underwater robots have been studied. We employed template matching and mean shift algorithms for the object detection and tracking methods. Also, we propose the weighted correlation coefficient of adaptive threshold -based and color-region-aided approaches to enhance the object detection performance in various illumination conditions. The color information is incorporated into the template matched area and the features of the template are used to robustly calculate correlation coefficients. And the objects are recognized using multi-template matching approach. Finally, the water basin experiments have been conducted to demonstrate the performance of the proposed techniques using an underwater robot platform yShark made by KORDI.

• Journal of Powder Materials
• /
• v.24 no.1
• /
• pp.17-23
• /
• 2017

In this study, a finite element analysis approach is proposed to predict the fluid-structure interaction behavior of active materials for lithium-ion batteries (LIBs), which are mainly composed of graphite powder. The porous matrix of graphite powder saturated with fluid electrolyte is considered a representative volume element (RVE) model. Three different RVE models are proposed to consider the uncertainty of the powder shape and the porosity. P-wave modulus from RVE solutions are analyzed based on the microstructure and the interaction between the fluid and the graphite powder matrix. From the results, it is found that the large surface area of the active material results in low mechanical properties of LIB, which leads to poor structural durability when subjected to dynamic loads. The results obtained in this study provide useful information for predicting the mechanical safety of a battery pack.

• International Journal of Computer Science & Network Security
• /
• v.22 no.4
• /
• pp.394-400
• /
• 2022

The radio resources available in a wireless network system are limited. Therefor, job of managing resources is not easy task. Because the resources are shared among the UEs that are connected, the process of assigning resources must be carefully controlled. The packet scheduler in an LTE network is in charge of allocating resources to the user equipment (UE). Femtocells networks are being considered as a promising solution for poor channel performance for mulitple environments. The implementation of femtocells into a macrocell (traditional base station) would boost the capacities of the cellular network. To increase femtocells network capacity, a reliable Packet Scheduler mechanism should be implemented. The Packet Scheduler technique is introduced in this paper to maximize capacity of the network while maintaining fairness among UEs. The proposed solution operates in a manner consistent with this principle. An analysis of the proposed scheme's performance is conducted using a computer simulation. The results reveal that it outperforms the well-known PF scheduler in terms of cell throughput and average throughput of UEs.