• 제목/요약/키워드: the Color Band

검색결과 509건 처리시간 0.03초

일회용 스트립형 효소면역센서용 플랫폼의 개발 (Development of Disposable Enzyme-linked Immunosensor Strip Platform)

  • 최지혜;이승재;장승철;김경천
    • 센서학회지
    • /
    • 제20권6호
    • /
    • pp.400-405
    • /
    • 2011
  • This study introduced the development of a strip type disposable enzyme-linked immunosensor platform for the detection of IgG. Strips of the strip sensor were fabricated by using commercial nitrocellulose filter membranes and a housing holder for the strips was manufactured by using a standard injection molding process for a plastic material. An IgG-urease conjugate was prepared and used for the competitive immune-binding with sample IgG. From the enzymatic reaction between the conjugated urease and urea added, ammonia was generated and caused a localized alkaline pH change on the immobilized antibody band which was coated onto the sensor strips. This pH increase subsequently caused a color change of the antibody band in the presence of a pH indicator, phenol red. Used in conjunction with a competitive immunoassay format, the intensity of the color produced is directly linked with the concentration of target analyte, IgG, and specific measurement of IgG in a lateral flow immunoassay format was achieved over the range 100 ppb to 2000 ppb IgG.

UV와 IR 대역 신호를 이용한 표적 신호 검출 시뮬레이션 (Simulation of Target Detection using UV and IR Band Signals)

  • 두경수;오정수;장성갑;홍현기;서동선;최종수
    • 대한전자공학회논문지SP
    • /
    • 제38권1호
    • /
    • pp.79-88
    • /
    • 2001
  • 항공기 등은 미사일의 추적을 피하기 위해 대응능력(countermeasure)으로 섬광탄(flare)을 운용한다. 일반적으로 적외선 섬광탄은 표적에 비해 높은 방사 에너지를 방출하여, 미사일이 표적 대신 섬광탄을 추적하도록 설계된다. 따라서 섬광탄이 존재하는 상황하에서 표적을 정확하게 추적하기 위해서는 섬광탄 및 배경 등으로부터 표적신호를 분리하여 표적을 인식해야 한다. 본 논문에서는 섬광탄의 영항을 배제하고 정확히 표적을 추적하기 위해 자외선 및 적외선 대역을 이용하는 2-color 로젯 주사 탐색기(rosette scan seeker)를 시뮬레이션 하였다. 각 대역에서 얻어진 표적 및 섬광탄, 구름 신호 특성을 분석하였으며, 이로부터 표적을 정확히 검출함을 확인하였다.

  • PDF

The Color Variability Monitoring of HBC722

  • 백기선;박수종;;강원석;전이슬;최창수;이정은;임명신
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.103.1-103.1
    • /
    • 2012
  • We present the results of SDSS r, i and z band photometry for HBC722 (also known as $LkH{\alpha}$ 188 G4, PTF10qpf and V2493 Cyg), with Camera for Quasars in Early uNiverse (CQUEAN) attached to 2.1m Otto Struve telescope at McDonald Observatory, USA. HBC722 is a newly erupted FU Orionis type object, which produced optical outburst (${\Delta}V$=4.7 mag) over a year that peaked in 2010 September. We carried out the monitoring observations during 48 nights from 2011 April to 2012 June to check the short-term and the long-term variabilities for chasing the Keplerian rotation of the system. Comparing the photometric results of r, i and z band, we describe the color variability which is related to the physical properties of the system like circumstellar disk and accretion process.

  • PDF

450-500nm의 최대흡수를 가지는 순수 폴리올레핀 소재용 초소수성 오렌지 염료의 합성 (Synthesis of Super Hydrophobic Orange Dyes Having Maximum Absorption at 450-500nm for Pure Polyolefin Fibers)

  • 김태경;류명화
    • 한국염색가공학회지
    • /
    • 제26권3호
    • /
    • pp.165-172
    • /
    • 2014
  • Novel super hydrophobic orange dyes having maximum absorption band at 450-500nm were synthesized to dye polyolefin fibers such as polypropylene and ultra high molecular weight polyethylene fibers, using 4-alkylanilines and ${\beta}$-naphthol. Their absorption spectra at visible range showed almost the same, which meant that the alkyl substituents introduced to chromophore did not affect on color appearance of the dyes. Considering both color strength and wash fastness, the decyl-substituted dye was determined as the optimum one practically. From the dyeing results at various conditions, the optimum dyeing was $130^{\circ}C$ for 1 hour with 5% owf of dyes. The good fastness ratings to washing, rubbing were obtained showing 4-5 for both fibers. Light fastness was also acceptable giving rating 3-4 for polypropylene fibers and rating 3 for ultra high molecular weight polyethylene fibers.

디지털 카메라를 활용한 컬러 지상영상의 분광학적 특성 분석 (Analysis of the spectroscopic characteristics of Ground color images using a digital camera)

  • 고인철;서수영
    • 한국GIS학회:학술대회논문집
    • /
    • 한국GIS학회 2010년도 춘계학술대회
    • /
    • pp.137-144
    • /
    • 2010
  • DSLR 카메라를 이용하여 획득한 지상 디지털 영상자료는 지상 사진 측량, 공간모델링에 활용할 수 있다. 지상 디지털 영상에서 각 화소의 명암도는 영상을 결정하는 가장 중요한 매개변수(parameter)이다. 따라서 좀 더 명확한 명암도의 수치 자료를 획득하고 활용하기 위하여 디지털 카메라의 분광학적 특성과 파라미터를 추정해볼 필요가 있다. 본 연구에서는 Sony DSC-F828 DSLR 카메라로 연속촬영(프레임속도 0.38초)을 통하여 얻은 7장의 같은 디지털 컬러 사진으로부터 각각 RGB 밴드의 명암도 값을 추출하여 프레임 간 화소별 명암도 차이를 확인하고, 각 컬러 밴드에 대한 각 화소의 통계학적인 분석을 통하여 분광학적인 특성의 프레임별, 화소별, 밴드별 변화와 그에 따른 상관관계에 대하여 추정해 보는 것을 목적으로 한다.

  • PDF

소형 다중분광 항공촬영 시스템(PKNU 3호) 개발에 관한 연구 (Research for development of small format multi -spectral aerial photographing systems (PKNU 3))

  • 이은경;최철웅;서영찬;조남춘
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2004년도 추계학술발표회 논문집
    • /
    • pp.143-152
    • /
    • 2004
  • Researchers seeking geological and environmental information, depend on remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, adverse weather conditions as well as equipment expense limit the ability to collect data anywhere and anytime. To allow for better flexibility in geological and environmental data collection, we have developed a compact, multi-spectral automatic Aerial Photographic system (PKNU2). This system's Multi-spectral camera can record visible (RGB) and infrared (NIR) band (3032*2008 Pixels) images Visible and infrared band images were obtained from each camera respectively and produced color-infrared composite images to be analyzed for the purpose of the environmental monitoring. However this did not provide quality data. Furthermore, it has the disadvantage of having the stereoscopic overlap area being 60% unsatisfied due to the 12 seconds of storage time of each data The PKNU2 system in contrast, photographed photos of great capacity Thus, with such results, we have been proceeding to develop the advanced PKNU2 (PKNU3) system that consists of a color-infrared spectral camera that can photograph in the visible and near-infrared bands simultaneously using a single sensor, a thermal infrared camera, two 40G computers to store images, and an MPEG board that can compress and transfer data to the computer in real time as well as be able to be mounted onto a helicopter platform.

  • PDF

Deep Blue LED 광원과 형광체를 이용한 초고연색 백색 인공태양광 LED 소자의 개발 (Development & Reliability Verification of Ultra-high Color Rendering White Artificial Sunlight LED Device using Deep Blue LED Light Source and Phosphor)

  • 안종욱;권대규
    • 산업경영시스템학회지
    • /
    • 제46권3호
    • /
    • pp.59-68
    • /
    • 2023
  • Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.

ZnTe-InSb Heterojunction의 전기적 특성 (Electrical Properties of ZnTe-lnSb Heterojunctions)

  • 김화택
    • 대한전자공학회논문지
    • /
    • 제12권4호
    • /
    • pp.35-40
    • /
    • 1975
  • ZnTe-lnSb Heterojunction을 계면합금법으로 제작했다. Insb의 In이 ZnTe결정에 확산되어 계면에 고저항 ZnTe충을 성장시켜 P-i-n구조를 갖고 있으며 전류수송기구는 p형 ZnTe 가전자대로부터 고저항 ZnTe충에 주입된 Hole의 SCLC기구에 의존된다. 순방향과 역방향 전압을 인가할때 실온에서 오런지색 전 장발장이 관측되었다. The Zn7e-lnSb heterojunctions was prepared by interface alloying technique. The structure of this beterojunction had p-i-n which semi-insulating ZnTe laver at interface of this heterojunction was formed by diffusing In of InSb into ZnTe crystal. The current transport mechanism of this heterojunction was Spacecharge-Limited-Current(SCLC) mechanism by hole at semi-insulating ZnTe layer. The hole wart injected from valence band of p- type SnTe crystal. Orange color electroluminescence was observed at this heterojunction when forward and reversed bias voltage applied.

  • PDF

무당벌레(Harmonia axyridis) 초시색상 패턴의 유전 및 이의 관련유전자 탐색 (Molecular cloning of Prophenoloxidase (PPO) gene related to melanin formation of elytra of Harmonia axyridis)

  • 김세희;서미자;박민우;유용만;윤영남
    • 농업과학연구
    • /
    • 제39권1호
    • /
    • pp.23-28
    • /
    • 2012
  • In order to cloning of PPO gene as a melanin formation related genes involved in hardening and pigmentation of insect integument or wing, we cloned cDNA and analyzed the sequence of PPO gene of H. axyridis. PPO2 primer were designed based on the sequences of PPO genes of Tribolium castaneum and Drosophila melanogaster, and then plasmid DNA were cloned from PCR products obtained from different two color patterns. When the plasmid DNA band pattern were digested by restriction enzymes, BamH1, Xba1, and EcoR1, we found same size band pattern. However, this sequence was not homologous to sequence of T. castaneum PPO gene. Using the primer designed based on the sequence of D. melanogaster, 209 bp PCR product was observed.

Role of endoscopy in gastroesophageal reflux disease

  • Daniel Martin Simadibrata;Elvira Lesmana;Ronnie Fass
    • Clinical Endoscopy
    • /
    • 제56권6호
    • /
    • pp.681-692
    • /
    • 2023
  • In general, gastroesophageal reflux disease (GERD) is diagnosed clinically based on typical symptoms and/or response to proton pump inhibitor treatment. Upper gastrointestinal endoscopy is reserved for patients presenting with alarm symptoms, such as dysphagia, odynophagia, significant weight loss, gastrointestinal bleeding, or anorexia; those who meet the criteria for Barrett's esophagus screening; those who report a lack or partial response to proton pump inhibitor treatment; and those with prior endoscopic or surgical anti-reflux interventions. Newer endoscopic techniques are primarily used to increase diagnostic yield and provide an alternative to medical or surgical treatment for GERD. The available endoscopic modalities for the diagnosis of GERD include conventional endoscopy with white-light imaging, high-resolution and high-magnification endoscopy, chromoendoscopy, image-enhanced endoscopy (narrow-band imaging, I- SCAN, flexible spectral imaging color enhancement, blue laser imaging, and linked color imaging), and confocal laser endomicroscopy. Endoscopic techniques for treating GERD include esophageal radiofrequency energy delivery/Stretta procedure, transoral incisionless fundoplication, and endoscopic full-thickness plication. Other novel techniques include anti-reflux mucosectomy, peroral endoscopic cardiac constriction, endoscopic submucosal dissection, and endoscopic band ligation. Currently, many of the new endoscopic techniques are not widely available, and their use is limited to centers of excellence.