• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.272-279
• /
• 2018

The high pressure processing (HPP) is a technology which can preserve the quality of foods, such as the fresh taste, incense, texture, vitamin content, and so on, by minimizing the heating process. It does so by applying an instantaneous and uniform pressure that is the same as the water pressure that is 60 km deep in the sea. HPP is a technology that can inhibit food poisoning and spoilage caused by microorganisms and is currently an actively studied area. In this study, we investigated the effects of a high pressure treatment (0, 4, 6 min) on sliced ham, which is a typical meat product, at 600 MP a were tested for their effect on freshness. Moisture contents varied from 48 to 69%, salinity varied from 1.07 to 1.11%, and the pH decreased from 6.4~6.5 to 6.1~5.15. However, there was no difference between the control and treatment groups. General bacteria stored at $20^{\circ}C$ after hyper-pressure treatment were found to have no significant microorganisms in all groups until 4 weeks. but exceeded $10^5$ in control group and HPP 6 min treatment group from 5 weeks, At week 7, it was found to exceed $10^6$. The results indicate it was not possible to ingest food in the 4-and 6 minute treatment groups. Coliform was not observed in all groups despite observing for a total of 7 weeks at $20^{\circ}C$ weight test. VBN, a method used to determine the protein freshness of meat, showed a VBN value of less than 1 mg% until the fourth week and a value of 1 to 2 mg% after 5 weeks. The TBA was used as an index of the degree of fat acidosis in the meat tissues. The results showed it was below 0.18 mgMA / kg until the end of 7 weeks; this value was within the range for fresh meat, and there was no difference in treatment group. In this experiment, deformation of the packaging material did not occur and no swelling occurred due to the generation of gas. It is believed that the basic preservation effect was achieved only by blocking with the air due to the close contact of the packaging material.

• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.840-846
• /
• 2005

This study was carried out to investigate the effect of electron beam irradiation and cooking temperature on physico-chemical characteristics and lipid oxidation of beef. A total of six beef carcasses ($280\∼300 kg$) that were quality grade $1^{+}$(marbling score No.7, meat color No.4, maturity No.1, texture No.1) was purchased at the commercial slaughter house. The carcasses were transported and washed using high pressure water, and pasteulized with $ 50\% $ ethyl alcohol in the laboratory. After the carcasses were deboned and trimmed, loin and round were taken out to make steak (1.5cm thickness) or ground beef respectively. Samples were wrap or vacuum packaged and irradiated with 0, 3, 4.5, 6 and 7.5 kGy using electron-beam accelerator at Samsung Heavy Industries Ltd. Co. (in Taejun). Irradiated samples were cooked with different methods(electronic pan and gas oven) and temperatures ($ 60^{\circ}C, 70^{\circ}C and 80^{\circ}C$) and used to measure fatty acid composition, TBARS, cholesterol oxide products and panel test scores. The content of saturated fatty acids increased by increasing heating temperature in oven boiling steak (OBS) and pan boiling steak (PBS), and there was no difference by electron-beam irradiation. Both irradiated and non-irradiated treatment were high as the heating temperature increased in TBARS by heating temperature in PBS (p < 0.05) and the amount of Malonaldehyde (MA), standard of fat deterioration, was increased in OBS (p < 0.05). Non-irradiated and 3, 6 kGy treatment produced about 2 fold amount of MA at $ 60^{\circ}C $ compared with $ 80^{\circ}C $. In comparison with PBS, OBS produced much amount of MA and a bit different from non-irradiated treatment but did not show no tendency. As irradiation levels and heating temperature increased, the amount of cholesterol oxides products was increased and also pan-heating method, direct heating method, significantly increased the degree of oxidation compared with oven-heating method, indirect heating method (p < 0.05).

• Food Science and Preservation
• /
• v.11 no.3
• /
• pp.394-399
• /
• 2004

The effects of gamma irradiation to improve the hygienic quality and microbiological shelf stability of whole baked egg were investigated by comparison with autoclaving process. The contamination levels of coliform, total aerobic bacteria and fungal group in a fresh egg were 10$^{5}$ CFU/g, 10$^{2}$ CFU/g and 10$^{1}$ CFU/g, respectively. After baking process, total aerobic bacteria and fungi were not exceeded to 10$^{1}$ CFU/g. Also, coliform was not detected under the aseptic process. However, cell counts of the baked egg after packaging reached to 10$^{4}$ CFU/g of total aerobic bacteria, 10$^{1}$ CFU/g of coliform, and 10$^{2}$ CFU/g of fungi. Therefore, it was assumed that microbial contamination of baked and packaged egg was mainly originated from an environmental uptake during packaging process. Microbiological shelf stability of the non sterilized control was about a week. Whereas, the baked eggs irradiated at more than 5 kGy were stable over 12 weeks at ambient condition as like those being autoclaved. Analytical texture profIle was stable within 10 kGy, but it became hardened in the sample treated with autoclaving. About 67$\%$ of panelists identified a sensory difference between non-irradiated and 10 kGy-irradiated sample. The baked egg irradiated at 10 kGy and autoclaved had lower acceptability than the control or samples irradiated lower than 5 kGy. Therefore, it was considered that optimal irradiation dose for radiation sterilization of baked and packaged egg was 5 kGy. At that point, it was recommended that appropriate microbiological shelf-life was 12 weeks at ambient condition.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.375-380
• /
• 2008

We made an experiment of keeping extension of raw and semi-dried flounder (Pleuronectes herzensteini). Effect of with(WG) or without gill (OG), drying degree (20% drying：20D, 40% drying：40D) and storage temperature (5 and $10^{\circ}C$) and 0.1% chitosan-ascorbate (CA) treatment of vacuum packaging flounder on growth of contaminated microorganism during storage for 10 days were investigated. Total aerobacter (TA) in the OG-treated raw flounder was $0.3{\sim}0.5$ log cycle lower than that of WG-treated flounder and also, number of coliform (CF) and E. coli (CO) in OG were lower compared with WG. Number of TA,. Especially, the TA was $0.42{\sim}1.20$ log cycle lower compared with raw flounder. The TA of the raw flounder stored at $5^{\circ}C$ compared to $10^{\circ}C$ was $0.6{\sim}1.3$ log cycle lower. The growth of total aerobacter, coliform (and E. coli separated from raw flounder in tryptic soy broth were completely inhibited by 0.1% CA. But the growth of TA in the raw and 20% dried flounder was 1.5 log cycle inhibited by 0.1% CA, and the growth of CF and CO were also slightly inhibited. We did value raw sample that treated CA 0D and 20D, and did vaccum packaging at the $10^{\circ}C$ for 10 days, Sensory quality such as appearance, freshness, and texture and overall acceptability after cooking of the 0.1% CA-treated raw and 20% dried flounder were evaluated from good to very good, while CA non-treated products were evaluated to moderate.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.6
• /
• pp.853-859
• /
• 2011

We developed and investigated sugar-soaked black soybean snack (SSBSS) to increase the availability of black soybean. The most desirable moisture contents and texture properties of hardness and gumminess in preparing SSBSS were obtained at a sugar concentration of $40^{\circ}brix$ for the first sugar soaking step and $50^{\circ}brix$ for the second sugar soaking process. Sensory evaluation also showed that SSBSS prepared with $40^{\circ}brix$ for first sugar soaking step and $50^{\circ}brix$ for the second sugar soaking process was graded higher than the other samples in all questionnaires. Prepared SSBSS had a final moisture content of $5.50{\pm}0.39%$, crude protein content of $16.25{\pm}0.07%$, and crude lipid content of $34.26{\pm}3.95%$. The ash and carbohydrate contents of SSBSS were $0.51{\pm}0.05%$ and $43.48{\pm}0.01%$, respectively, and the final glucose content was $10.20{\pm}0.10^{\circ}brix$. GABA concentration was $15.24{\pm}1.47\;mg$/g and the contents of daidzein, genistein, daidzin, and genistin were $695.7{\pm}6.08\;{\mu}g$/g, $810.6{\pm}3.9\;{\mu}g$/g, $755.8{\pm}39.6\;{\mu}g$/g, and $1640.7{\pm}390.8\;{\mu}g$/g, respectively. In addition, the phenolic compound and flavonoid contents in SSBSS were $0.16{\pm}0.01$ and $2.33{\pm}0.40\;mg$/g, respectively.

• Korean Journal of Food Science and Technology
• /
• v.36 no.3
• /
• pp.385-392
• /
• 2004

Physicochemical and sensory characteristics of commercial Oiji, Korean pickled cucumbers (six commercial and three traditionally made products) were investigated. Saltiness values for commercial and traditionally made products were 3.424-4.47 and 3.92-7,23%, and acidity and pH were 3.43-3.85 and 0.39-0.75%, respectively, Commercial products showed lower L and higher b values than traditionally made products. Redness of both products ranged from -1.47 to -3.71. Numbers of total microbial, lactic acid bacteria, and yeast in traditionally made products ($1{\times}10^{7}-1.3{\times}10^{9},\;4{\times}10^{6}-4.7{\times}10^{8},\;and\;1.3{\times}10^{6}-3{\times}10^{8}\;cfu/mL,\;respectively$), were higher than those of commercial products ($1{\times}10^{4}-2{\times}10^{7},\;1{\times}10^{4}-6{\times}10^{6},\;and\;1{\times}10^{4}-6{\times}10^{6}cfu/mL\;respectively$). Texture analysis revealed fracturability (2,103-3,010 g) and hardness (409-890 g) varied among the products above. Overall acceptability scores of commercial products C1 and C2 were highest at 7.6-8.0 compared to other products (p<0.05). From the principal component analysis, the first principal component (PC1, 79.94%) and the second principal component (PC2, 19.94%) could describe the majority of the variability. Commercial product C1, C2, C3, and C7 having high negative loadings on the PC2 axis are closely related to over-all acceptability, over-all taste, savory taste and hardness. From Pearson correlation analysis, hardness and chewiness correlated positively with saltiness, whereas over-all acceptability, positively correlated with savory and overall taste, respectively (p<0.05).

• Journal of Animal Science and Technology
• /
• v.55 no.1
• /
• pp.51-59
• /
• 2013

This study was conducted to investigate the dietary effect of total mixed rations (TMR) containing brewers grain, soybean curd and rice straw, respectively, on growth performance and carcass characteristics of Hanwoo steers. Twenty four Hanwoo steers (average body weight 168 kg) in 6 months age were randomly allocated to 4 experimental groups, which contained 6 animals per group during 22-months feeding trial. The treatment was composed of the group fed concentrate and rice straw separately (T1), the group fed TMR containing brewers grain (T2), the group fed TMR containing soybean curd (T3) and the group fed TMR containing rice straw (T4). Body weight (BW) was not different among treatment groups during the growing and middle fattening period. However, it was significantly greater in T4 group than in T2 group on the final BW (p<0.05). Average daily gain was significantly greater in TMR groups compared to T1 group on the growing and late fattening (p<0.05). However, it was not different in total average. Dry matter intake tended to be increased in TMR groups. The feed conversion ratio was significantly lower in T4 group compare to T2 group (p<0.05). According to the yield traits, carcass weight of T1, T2, T3 and T4 were 389.0, 368.4, 387.5 and 384.3 kg, respectively. The back fat thickness, rib-eye area, and yield index were not different among the groups. Meat color, fat color, texture and maturity were not significantly different among groups. However, marbling score and appearance rate of meat quality grade of over $1^+$ were greater in T2 and T3 groups compare to other groups. Therefore, these results indicated that TMR with brewers grain and soybean curd may be ameliorated the growth performance and carcass characteristics of Hanwoo steers.

• The Journal of Engineering Geology
• /
• v.15 no.2 s.42
• /
• pp.169-184
• /
• 2005

Unagsan and Sogrisan granites are widely distributed in the northern Gyeonggi massif and middle Ogcheon belt, respectively, and they show different petrologic characteristics as follows. The former has compact textures and light grey colors, and the latter has spotted miarolitic textures and pink colors. Most of the samples selected for tests are fresh and coarse-grained. And bored core samples were prepared so that they are vertical to the rift plane. The results of modal analysis show that Unagsan granite has significantly higher quartz and plagioclase contents (Qz+Pl) than Sogrisan granite. In contrast, alkali feldspar content (Af) of Sogrisan granite is much higher than that of Unagsan granite. Therefore, it is believed that the light grey colors of Unagsan granite are due to relatively high Qz+Pl, and the pink colors of Sogrisan granite are caused by higher Af. Fractures in Sogrisan granite have strongly perpendicular strike patterns and more dip values close to vertical compared with the fractures in Unagsan granite. Results of the fracture pattern analysis suggest that the Sogrisan granite has better potential to produce dimension stones than the Unagsan granite. However, miarolitic textures often found in the Sogrisan granite may be one of the factors reducing the granite quality. The Unagsan and Sogrisan granites have similar specific gravity values of 2.60 and 2.57, respectively. Absorption ratios and porosity values of Sogrisan granite are higher than those of Unagsan granite, and they shows linearly positive correlations. Compressive and tensile strengths of the Unagsan granite are generally higher than those of Sogrisan granite. These differences and variation trends found in physical properties of Unagsan and Sogrisan granite can be explained by the differences in the textures of Unagsan and Sogrisan granites, namely compact and miarolitic textures respectively. For Unagsan granite, compressive and tensile strengths are negatively correlated with porosity but for Sogrisan granite no specific correlations are found. This is probably due to the irregular dispersion patterns of miarolitic textures formed during the later stages of magmatic processes. Contrary to the trends found in absorption ratios, both granites have similar values of abrasive hardness, which can be explained by higher Qz+Af of the Sogrisan granite than those of the Unagsan granite and that quartz and alkali feldspar have relatively larger hardness values. For Sogrisan granite, compressive strength shows slightly positive correlations with Qz+Af+Pl and negative correlations with biotite and accessory mineral contents (Bt+Ac).

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.207-218
• /
• 1970

Studies were carried out to develope the most economical and practical methods of packaging and preservation of kimchi, so commercialization of kimchi manufacture could proceed rapidly. The results obtained may be summarized as following. (1) It is generally established that the acceptable range of lactic acid content of kimchi is between 0.4% and 0.75%. Based on sensory evaluation, kimchi having lactic acid content below 0.4% and above 0.75% was not edible, and the time of optimum taste corresponded to the vicinity of 0.5% of lactic acid content. For the refrigeration storage with or without preservatives, the packaging kimchi in plastic film must be done at the lactic acid content of 0.45%, for lactic acid fermentation will continue slowly after the packaging. However, for the heat sterilized kimchi the packaging should be done at the 0.5% of lactic acid content for the best because lactic acid fermentation is completely stopped after the packaging. (2) Polyethylene, polypropylene, and polycello were chosen as suitable packaging materials. Polyethylene is cheapest among them but kimchi packaged in this film was damaged frequently in handling process and gave off kimchi flavor. On the other hand polypropylene also gave off kimchi flavor, but its higher mechanical strength gave better protection to kimchi and it had superior display effect due to the transparancy. Therefore polypropylene made much better packaging material. Polycello proved to be the best packaging material from the standpoint of physical characteristics but its price is higher than that of other plastic films. To be effective, the thickness of plastic films for packaging kimchi must exceed 0.08mm. (3) Keeping property of kimchi appeared to be excellent by means of freezing. However, by the time the frozen kimchi was thawed out at room temperature, moisture loss due to drip was extensive, rendering the kimchi too stringy. (4) Preservation of kimchi at refrigerated temperatures proved to be the best method and under the refrigerated condition the kimchi remained fresh as long as 3 months. The best results were obtained when kimchi was held at $0^{\circ}C$. (5) In general, preservatives alone were not too elective in preserving kimchi. Among them potassium sorbate appeared to be most effective with the four fold extension of self-life at $20^{\circ}C$ and two fold extension at $30^{\circ}C$. (6) In heat sterilization the thickness of packaged kimchi product had a geat effect upon the rate of heat penetration. When the thickness ranged from 1.5 to 1.8cm, the kimchi in such package could be sterilized at $65^{\circ}C$ for 20 minutes. Kimchi so heat treated could be kept at room temperature as long as one month without apparent changes in quality. (7) Among combination methods, preservation at refrigerated and heat sterilization could be favorably combined. When kimchi was stored at $4^{\circ}C$ after being sterilized at $65^{\circ}C$ for 20 minutes, it was possible to preserve the kimchi for more than 4 months.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.2
• /
• pp.12-26
• /
• 2014

This study has researched the forms of arrangement and use of the oddly shaped stones which were used at palaces during Joseon Dynasty based on arrangements of stones as shown in Donggwoldo(東闕圖), and tried to identify its special features. The sorts of stone's arrangements which set formal patterns by assisting an axis in Donggwoldo can be classified as the single type using one stone, the symmetrical type using 2 stones symmetrically and the parallel type using 3 or more stones. The single type was used to endow a focal point and to accent centrality by arranging a stone on the axis performed from formal shaped buildings. The symmetrical type was used to show order and hierarchy by placing two odd-shaped stones on either side of a building. And the parallel type which is arranged three stones side by side, is put a middle stone on the central axis line to determine strong directional and frontality. Also similarity to method of arrangement of stones can be found from planting trees in a prominent way for scenery or planting trees symmetrically. Stones and trees can be chosen according to nature and scale of places and basically their effects of formation of axis and creating typical space is same. Based on these respect, the characteristics of arrangement of stones shown in Donggwoldo can be briefly summarized as follows. First, the oddly shaped stones were used by creating a centripetal space in order to show a grade of rank. Second, the distances among stones could be adjusted to the sizes of the architecture which was at the center. The aim was to provide stability through the balanced composition between the central axis and symmetrical structures. Third, the form of regularity was added by using stone vase in consideration of irregular shape of stone causing interference in forming regular symmetry. Fourth, a centrality was emphasized by adding change to central stones in the parallel type used 3 erect stones. Fifth, the sizes of stone were limited in order to make smooth for the mix and adjustment of its position with the types of other garden ornaments, so the oddly shaped stones in palace have portability. Sixth, the oddly shaped stones in palace which were appreciated as inspirational object basically were a sculpture of the same quality with suiseki (壽石), and the appreciative method, the composition and shape had developed in the same texture. Finally, the even number of stones by parallel type were arranged by equal partition. But odd number of stones followed the method with symmetrical arrangement on its center stone. These principles of stone arrangement are judged as distinguishing methods which oddly shaped stones was made and used in Joseon palaces.