• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.421-437
• /
• 2002

In order to quantify the anisotropic properties of rock included joints and shear behavior in joint surface, the mold is Produced for rock joint surface using gypsum Plaster and Peformed for replicated joint models made of cement mortar. Rock sample is measured using mechanical profilometer before testing and their result is expressed quantitatively. The statistical parameters and the fractal dimension by fractal theory for roughness is investigated its coordinate value for numerical process. The shear strength to the shear displacement in low level normal stress ismaintained or increased in most joint models. Their results present that this relationship is depended several roughness properties in joint model for natural rock joint. The relationship between the shear strength and the Properties for profiles estimated by some statistical parameter in roughness has the low correlation and is not constant. The result between the data for direct shear test and using Barton's equation, Barton's equation has not the effectiveness for the effect of anisotropy and has not suitable to recognizing the properties for joint surface. It means that JRC has not the properties of anisotropic rock surface. The fractal dimension is well correlated with the data of direct shear test than those of JRC. New experimental formulae using fractal dimension is comported with the anisotropic properties for direct shear test.

• Smart Media Journal
• /
• v.5 no.2
• /
• pp.15-23
• /
• 2016

In this paper we propose the depth-poselets using body-part-poses and also propose the method to recognize the gesture. Since the gestures are composed of sequential poses, in order to recognize a gesture, it should emphasize to obtain the time series pose. Because of distortion and high degree of freedom, it is difficult to recognize pose correctly. So, in this paper we used partial pose for obtaining a feature of the pose correctly without full-body-pose. In this paper, we define the 16 gestures, a depth image using a learning image was generated based on the defined gestures. The depth poselets that were proposed in this paper consists of principal three-dimensional coordinates of the depth image and its depth image of the body part. In the training process after receiving the input defined gesture by using a depth camera in order to train the gesture, the depth poselets were generated by obtaining 3D joint coordinates. And part-gesture HMM were constructed using the depth poselets. In the testing process after receiving the input test image by using a depth camera in order to test, it extracts foreground and extracts the body part of the input image by comparing depth poselets. And we check part gestures for recognizing gesture by using result of applying HMM. We can recognize the gestures efficiently by using HMM, and the recognition rates could be confirmed about 89%.

• Journal of KIISE
• /
• v.42 no.1
• /
• pp.54-67
• /
• 2015

Nowadays, studies on the fusion of Semantic Web technologies are being carried out to promote the interoperability and value of sensor data in an IoT environment. To accomplish this, the semantic translation of sensor data is essential for convergence with service domain knowledge. The existing semantic translation technique, however, involves translating from static metadata into semantic data(RDF), and cannot properly process real-time and large-scale features in an IoT environment. Therefore, in this paper, we propose a technique for translating large-scale streaming sensor data generated in an IoT environment into semantic data, using real-time and parallel processing. In this technique, we define rules for semantic translation and store them in the semantic repository. The sensor data is translated in real-time with parallel processing using these pre-defined rules and an ontology-based semantic model. To improve the performance, we use the Apache Storm, a real-time big data analysis framework for parallel processing. The proposed technique was subjected to performance testing with the AWS observation data of the Meteorological Administration, which are large-scale streaming sensor data for demonstration purposes.

• Journal of Information Management
• /
• v.40 no.3
• /
• pp.61-77
• /
• 2009

Recently, enterprises are protecting information assets with the various means of control and management. Nevertheless, they are confronted with the dilemma which the higher securitylevel they request, the lesser efficiency and productivity in short terms they acquire by the inconvenience of business process. In addition, in spite of the steady increase of organization's investment on information protection, the systematic way for the performance measurement of information protection has not been suggested, so that in reality, it is difficult to make the decision to invest on information-protection and elicit the direction to improve it. For this reason, this study intended to establish the concept of the protection and security of information assets of enterprises and to categorize the type of activities to protect information assets into management activity and control activity, and analyze the effects of management activity and control activity for information asset protection on the performance of information asset protection activity and organization. For this research, questionnaire survey was conducted with literature study and the PLS(Partial Least Square) was used to analyze the measurement model and hypotheses testing. The PLS analysis results indicate that management activity for information asset protection affects information asset protection performance. Further, organizational performance is influenced by information asset protection performance. Practical implications of these findings and future research implications are also discussed.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.1-26
• /
• 1993

The purpose of this study was to investigate the effect of acid etching on the surface appearance and fracture toughness of five glass ionomer cements. Five kinds of commercially available glass ionomer cements including chemical curing filling type, chemical curing lining type, chemical curing metal reinforced type, light curing tilling type and light curing lining type were used for this study. The specimens for SEM study were fabricated by treating each glass ionomer cement with either visible light curing or self curing after being inserted into a rubber mold (diameter 4mm, depth 1mm). Some of the specimens were etched with 37% phosphoric acid for 0, 15, 30, 60, go seconds, at 5 minutes, 1 hour and 1 day after mixing of powder and liquid. Unetched ones comprised the control group and the others were the experimental groups. The surface texture was examined by using scanning electron microscope at 20 kV. (S-2300, Hitachi Co., Japan). The specimens for fracture toughness were fabricated by curing of each glass ionomer cement previously inserted into a metal mold for the single edge notch specimen according to the ASTME399. They were subjected to a three-point bend test after etching for 0, 30, 60, and 90 seconds at 5 minutes-, 1 hour-and 1 day-lapse after the fabrication of the specimens. The plane strain fracture toughness ($K_{IC}$) was determined by three-point bend test which was conducted with cross-head speed of 0.5 mm/min using Instron universal testing machine (Model No. 1122) following seven days storage of the etched specimens under $37^{\circ}C$, 100% humidity condition. Following conclusions were drawn. 1. In unetched control group, crack was present, but the surface was generally smooth. 2. Deterioration of the surface appearance such as serious dissolving of gel matrix and loss of glass particles occured as the etching time was increased beyond 15 s following Immediate etching of chemical curing type of glass ionomer cements. 3. Etching after 1 h, and 1 d reduced surface damage, 15 s, and 30s etch gave rough surface appearance without loss of glass particle of chemical curing type of glass ionomer cements. 4. Light curing type glass ionomer cement was etched by acid, but there was no difference in surface appearances according to various waiting periods. 5. It was found that the value of plane stram fracture toughness of glass ionomer cements was highest in the light curing filling type as $1.79\;MNm^{-1.5}$ followed by the light curing lining type, chemical curing metal reinforced type, chemical curing filling type and chemical curing lining type. 6. The value of plane stram fracture toughness of the chemical curing lining type glass ionomer cement etched after 5 minutes was lower than those of the cement etched after 1 hour or day or unetched (P < 0.05). 7. Light curing glass ionomer cement showed Irregular fractured surface and chemical curing cement showed smooth fractured surface.

• The Korean Journal of Applied Statistics
• /
• v.5 no.2
• /
• pp.243-254
• /
• 1992

In the present study two sets of unbalanced two-way cross-classification data with and without empty cell(s) were used to evaluate empirically the various sums of squares in the analysis of variance table. Searle(1977) and Searle et.al.(1981) developed a method of computing R($\alpha$\mid$\mu, \beta$) and R($\beta$\mid$\mu, \alpha$) by the use of partitioned matrix of X'X for the model of no interaction, interchanging the columns of X in order of $\alpha, \mu, \beta$ and accordingly the elements in b. An alternative way of computing R($\alpha$\mid$\mu, \beta$), R($\beta$\mid$\mu, \alpha$) and R($\gamma$\mid$\mu, \alpha, \beta$) without interchanging the columns of X has been found by means of,$(X'X)^-$ derived, using $W_2 = Z_2Z_2-Z_2Z_1(Z_1Z_1)^-Z_1Z_2$. It is true that $R(\alpha$\mid$\mu,\beta,\gamma)\Sigma = SSA_W and R(\beta$\mid$\mu,\alpha,\gamma)\Sigma = SSB_W$ where $SSA_W$ and means analysis and $R(\gamma$\mid$\mu,\alpha,\beta) = R(\gamma$\mid$\mu,\alpha,\beta)\Sigma$ for the data without empty cell, but not for the data with empty cell(s). It is also noticed that for the datd with empty cells under W - restrictions $R(\alpha$\mid$\mu,\beta,\gamma)_W = R(\mu,\alpha,\beta,\gamma)_W - R(\mu,\alpha,\beta,\gamma)_W = R(\alpha$\mid$\mu) and R(\beta$\mid$\mu,\alpha,\gamma)_W = R(\mu,\alpha,\beta,\gamma)_W - R(\mu,\alpha,\beta,\gamma)_W = R(\beta$\mid$\mu) but R(\gamma$\mid$\mu,\alpha,\beta)_W = R(\mu,\alpha,\beta,\gamma)_W - R(\mu,\alpha,\beta,\gamma)_W \neq R(\gamma$\mid$\mu,\alpha,\beta)$. The hypotheses $H_o : K' b = 0$ commonly tested were examined in the relation with the corresponding sums of squares for $R(\alpha$\mid$\mu), R(\beta$\mid$\mu), R(\alpha$\mid$\mu,\beta), R(\beta$\mid$\mu,\alpha), R(\alpha$\mid$\mu,\beta,\gamma), R(\beta$\mid$\mu,\alpha,\gamma), and R(\gamma$\mid$\mu,\alpha,\beta)$ under the restrictions.

• Korean Journal of Remote Sensing
• /
• v.31 no.6
• /
• pp.561-570
• /
• 2015

Till now, applications of many kinds of satellite images have been accentuated in the datacentric scientific studies, researches regarding system development and concerned technologies for them are on the un-matured stage. Especially, satellite image processing requires large volume data handling and specific analysis functionalities, so that practical necessity of base study for system development is emphasized on. In the view of information system, various edged trends such as web standards, cloud computing, or web framework are utilized owing to their application benefits proven and business needs. Considered these aspects, a testing implementation was carried out using OpenStack cloud computing environment and e-government framework. As for the processing functions, WPS in GeoServer, as one of OGC web standards, was applied to perform interoperable data processing scheme between two or more remote servers. Working with the server implemented, client-side was also developed using several open sources such as HTML 5, jQuery, and OpenLayers. If it is that completed further experiments onsite applications with actual multi-data sets and extension of on-demand functionalities with the result of this study, it will be referred as an example case model for complicated and complex system design and implementation which needs cloud computing, geo-spatial web standards and web framework.

• Korean Security Journal
• /
• no.16
• /
• pp.243-264
• /
• 2008

Investigation about training of Private Security in Korea has managed status of training and understanding of issue mostly, systematic analysis about transfer effect as well as learning and determinant of training is insufficient. Consequently this investigation research to examine the effect of training program for newly appointed private security guards to learning and transfer then, to analyze factor through incumbent private security guard-oriented hypothesis testing under article 13, section 1 of the security guard law. To grasp effect factors of learning and transfer, this dissertation establishes research model and research hypothesis through domestic and foreign studies and then theoretical as well as positive literatures consideration in the first place. Conclusion of this investigation through techniques mentioned above and data analysis is as follows. First of all, the personal characteristics, training characteristics, work environment, difference of transfer as well as learning are verified in accordance with Sociodemographic characterist of Private Security Guard. After then, there is a difference of great import. Secondly, the effect of personal characteristics of Private Security Guard to the transfer is inspected. As a result, there is a difference of significance statistical. Thirdly, the effect of training characteristics of Private Security Guard to the transfer is inspected. Consequently, there is a difference of import statistical. The following thing, subsequent to inspection about the effect of work environment of Private Security Guard to transfer, statistical difference of import is.

• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.5
• /
• pp.280-289
• /
• 2003

The purpose of this study was to establish a model for recommendable application level of nitrogen fertilizer based on soil testing for summer chinese cabbage in highland. A field experiment was carried out with various nitrogen application levels in sand loamy soil with and without poultry manure compost. The application level of N in poultry manure compost plot was found to be $291kg\;ha^{-1}$ for maximum yield of chinese cabbage, and it was 87% of the required N application level, $335kg\;ha^{-1}$, for maximum yield of chinese cabbage in nonmanure plot. In the treatment of poultry manure, approximately $174kg\;ha^{-1}$ of N was required to obtain the same yield of chinese cabbage as the maximum yield obtained in the treatments without poultry manure application. Therefore, with poultry manure application, N application level can be reduced by 40%. Using these results, a new equation for N recommendation for chinese cabbage in highland soil was proposed. With the average organic matter content of $33g\;kg^{-1}$ in highland field, the application levels of N for chinese cabbage were in the range of $215-129kg\;ha^{-1}$, which means that 32.8-59.7% of current application amount of N fertilizer can be reduced.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.77-81
• /
• 2007

Diagnostic performance of polymerase chain reaction (PCR) for detecting Dirofilaria immitis in dogs was evaluated when no gold standard test was employed. An enzyme-linked immunosorbent assay test kit (SnapTM, IDEXX, USA) with unknown parameters was also employed. The sensitivity and specificity of the PCR from two-population model were estimated by using both maximum likelihood using expectation-maximization (EM) algorithm and Bayesian method, assuming conditional independence between the two tests. A total of 266 samples, 133 samples in each trial, were randomly retrieved from the heartworm database records during the year 2002-2004 in a university animal hospital. These data originated from the test results of military dogs which were brought for routine medical check-up or testing for heartworm infection. When combined 2 trials, sensitivity and specificity of the PCR was 96.4-96.7% and 97.6-98.8% in EM and 94.4-94.8% and 97.1-98% in Bayesian. There were no statistical differences between estimates. This finding indicates that the PCR assay could be useful screening tool for detecting heartworm antigen in dogs. This study was provided further evidences that Bayesian approach is an alternative approach to draw better inference about the performance of a new diagnostic test in case when either gold test is not available.