• Child Health Nursing Research
• /
• v.10 no.4
• /
• pp.383-394
• /
• 2004

Purpose: This study was conducted to identify resiliency factor, to test causal relationship and effect of resiliency factors on adaptation in families of children with cancer. A conceptual framework was constructed based on McCubbin's resiliency model. Hypotheses were tested with empirical data. Method: Data were collected using self-report questionnaire from 232 families of children with cancer. The collected data were analyzed using the SAS program and LISREL program for covariance structural analysis. Result: Family hardiness and problem-solving coping had significant direct effects on adaptation in families of children with cancer. Social support had significant indirect and total effect on adaptation. Family Schema had significant direct effect on family hardiness and problem-solving coping. Problem-solving communication had a significant direct effect on family hardiness and an indirect effect on family functioning and problem-solving coping. Among the resiliency factors, family hardiness had the greatest effect on adaptation in family of children with cancer. Conclusion: The findings suggest that nursing interventions to enhance family hardiness, problem-solving coping and social support would result in an increase in adaptation in families of children with cancer. An integrated intervention that emphasizes and promotes resiliency factors should be developed and established for families of children with cancer.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.45-48
• /
• 2008

This study is for proposing the shape of hollow and evaluating the structural performance of hollow reinforced concrete (RC) half slabs. The two-phase experimental works were carried out, and styrofoam was used for reduction of dead load and vibration. From the Phase I test result, the shape and spacing of the hollow were determined to obtain the high deduction ratio of the concrete and the desirable failure mode of the hollow RC half slabs. In the Phase II test, two slab specimens were tested in flexure to evaluate the flexural capacity of the hollow RC half slabs with the proposed hollow shape. In the result of the test, all the specimens having the proposed hollow shape showed sufficient flexural capacity.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.3 s.52
• /
• pp.13-20
• /
• 2003

This research aims at investigation of accuracy potential of RTK(Real-Time Kinematic) GPS in combination with Echo Sounder(E/S) for the coastal mapping. Apart from this purpose, the accuracy of ambiguity resolution with the OTF(On The Fly) method was tested with respect to the initialization time. The result shows that the accuracy is better than 1cm with 5-minute initialization in the distance of 10km baseline. The seaside topography was measured by the RTK GPS only, on the other hand the seafloor topography was surveyed in combination of RTK GPS and E/S. Comparing to the volume of seaside measured by RTK GPS and digital topographical map, the difference of only $2\%$ was achieved. This indicates that the coastal mapping. As a result, it has been revealed that every possible noise in surveying could be corrected and the accuracy could be improved. The accuracy of GPS data acquired in real time was as good as that acquired by post processing. It is expected that it will be useful for the analysis of coastal geographic characteristics because DTM(Digital Terrain Model) can be also constructed for the harbor reclamation, the dredging, and the variation of soil movement in a river.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.41-46
• /
• 1986

When barium titanate was synthesized in solid-solid reaction the abnormal expansion occurred from 90$0^{\circ}C$ to 110$0^{\circ}C$. The equi molecular mixture of $BaCo_3$ and $TiO_2$ was sintered from 90$0^{\circ}C$ to 130$0^{\circ}C$ on the condition of air vacuum and $CO_2$ atomosphere. After that the specimens were tested closely with XDR Dilatometer and SEM The result indicated that: 1, Volume expansion to be synthesized barium titanate in solid-solid reaction was affected by atomosphere sintering. 2. The solid reaction ot fiorm barium titanate in vacuum atomosphere occurred faster than that in air atomosphere. In vacuum atomosphere the maxium volume expansion was about 30% at 90$0^{\circ}C$ for 2hrs, 3. The solid reaction to form barium titanate in 4CO_2$ atomosphere occurred slower than that in air atomosphere. In $CO_2$ atomosphere the maximum volume expansion was 13% at 100$0^{\circ}C$ for 2 hrs. 4. According to the result of x-ray the expanison was caused by the reaction to form $BaTiO_3$ and change $Ba_2TiO_4$ into 4BaTiO_3$.

• Journal of Information Technology Applications and Management
• /
• v.20 no.2
• /
• pp.15-37
• /
• 2013

In this study, the validity of CRM introductory is defined as a driving force for the introduction of technology and concepts such as competence factors of CRM. Effect on the ability to verify the information technology CRM using this concept, we examined the effect of force CRM information technology has on the outcome from the point of view of the customer interaction. And we have tested the moderate effect for size of the company and the industry shape to the relationship between the adequacy and implementation of CRM. As a result, technical adequacy and competence of CRM implementation CRM, has a significant causal relationship to CRM information technology capability. Competence of CRM implementation has a causal relationship with care for the outcome of the interaction of the customer, shows the validity of the introduction of CRM companies are seeking Modulatory effect was verified using the company's size and industry classification, was significant only for the classification of industries. This result shows that must find ways to introduce the CRM industry depending on the form of different.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.73.2-73.2
• /
• 2016

We present the results of KaVA SgrA* observation together with Takahagi(32m), Yamaguchi(32m) and Nobeyama(45m) telescopes at 22 and 43GHz, respectively. In early 2014, G2 cloud was expected to encounter with SgrA* and to make a significant flux variation, but it has not been measured yet. So it's worth to check our amplitude calibration method to confirm if we have a missing flux caused by uncertainty in measuring it. We have tested both a standard method using system noise temperature(Tsys) with antenna gain information, and a template method in order to calibrate antenna gain using nearby maser source. As a result, we found that the latter method is useful for antennas which have inaccurate gain information or poor Tsys measurements, and is especially effective for sources at low elevation like SgrA*. In addition, the comparison shows that the amplitude calibration by standard method can be improved up to 10% with a correction factor using a template method. This result implies we can get more accurate flux from a standard method when any maser source not exists around target.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.6
• /
• pp.1834-1847
• /
• 2016

Main objectives of the this study are: to develop a model of "Flipped Leaning" that is designed to enhance self-directed learning, learning motivation and self-control, and to verify its effectiveness-in higher education. The verification process initially concentrated on the feasibility study of the model with a thorough literature review and case analyses; then, its general and practical applicability were tested with a field study. As a result, first, the CHANGE Class Model, specifically designed for effective and efficient "Flipped Learning", was developed. It is thus named for the stages that the learning process takes place in the model-i.e., (1) Check ${\rightarrow}$ (2) Ask ${\rightarrow}$ (3) Notice ${\rightarrow}$ (4) Group presentation ${\rightarrow}$ (5) Evaluation, and it emphasizes the dynamic, questions centered (i.e. back and forth between the students and the instructor as well as between the students) learning process. Second, the Model was instrumental in enhancing self-directed learning, learning motivation and self-control; thus, as a result, it significantly improved the effectiveness, the level of concentration and the attractiveness of the learning process. The value of this study lies in pointing to a clear plan to allow a student in higher learning to set-up a self-directed learning plan, to be able to control it while being continuously motivated to complete it.

• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.538-543
• /
• 2017

Progressive addition lenses (PAL) have very wide application in the modern glasses market. The unique progressive surface can make a lens have progressive refractive power, which can meet the human eye's different needs for distance-vision and near-vision. According to the national glasses fabrication standard, the difference between actual optical power after fabrication and nominal design value should be less than 0.1D over the lens effective area. The optical power distribution of PAL is determined directly by the surface. Consequently, the surface processing accuracy requirement is proposed. Beginning from the surface expressions of progressive addition lenses, the relationship equations between the surface sag and optical power distribution are derived. They are demonstrated through tolerance analysis and test of an example progressive addition lens with addition of 2.09D (5.46D-7.55D). The example addition surface is fabricated under given accuracy by a single-point diamond ultra-precision machine. The optical power of the PAL example is tested with a focal-meter after fabrication. The optical power addition difference between test result and design nominal value is 0.09D, which is less than 0.1D. The derived relationship between the surface error and optical power is verified from the PAL example simulation and test result. It can provide theoretical tolerance analysis proof for the PAL surface fabricating process.

• Journal of Korean Academy of Nursing
• /
• v.13 no.3
• /
• pp.119-126
• /
• 1983

Early extra-uterine development of the newborn infant has the potential for clarifying important questions of nature and care taking environment. In this study, tactile and auditory stimulation is used on .a group of infants to determine the effects of their response. Infants were tested by EKG at 24∼48 hrs after birth ana all they are free from complication. Stimuli presented were-touch and sound (40dB, 70dB and 40∼70dB). The result of the study were as follows: 1) The heart rate was seen to depend on their sleep-wake state. (light sleep ; 125/min, eyes: open & motor activity increase ； 151/min crying ; 185/min). 2) The heart rate affected by tactile & auditory stimulus. The heart rate response was acceleration above the prestimulus level. (tactile, 231min increase, auditory ; 16∼21/min increase), and heart rate change was seen to depend on prestimulus rate. (γ=.73) 3) There was a decrease in heart rate when they were soothe. (touch ; 24.8sec, 21/min decrease, pacifier ; 14.5sec, 26/min decrease) and significant difference in time between touch and pacifier (t= 1.76, p<0.05). This result support the evaluation of newborn infant's sensory abilitics, and has even begin to influence changes in nursing care. But systemic monitoring of newborn infants response would. further define.

• Journal of dental hygiene science
• /
• v.2 no.2
• /
• pp.85-88
• /
• 2002

Growth inhibition of the extract of Schizandra chinensis Baill on bacteria isolated from oral cavity of dental patient was investigated. The extract yield of water was 53.8%, and the yield was higher than these of methanol. High temperature was profitable to extract yield. As a result of investigation about antibacterial effect of water extract of S. chinensis, tested strains were mostly inhibited by water extract of S. chinensis. As a result of investigation about minimal inhibitory concentration(MIC) of water extract of S. chinensis on the oral bacteria, MIC of water extract of S. chinensis was between 125 and ${1000{\mu}g/ml}$.