• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.33 no.12
• /
• pp.19-28
• /
• 2017

The purpose of this study is to propose a design methodology to build temporary isolation rooms when infectious diseases suddenly occur in a certain region, such as the case of MERS-Cov in South Korea in 2015. Although most big hospitals usually have isolation rooms, they are expensive and dangerous to run such facilities on normal and typical days. To deal with these problems in this research, shipping containers are chosen as devices used to build the temporary isolation rooms near the original hospital. To do so, firstly, a prototype for the temporary isolation room was designed with the three part modules. The first part is for the medical team; the second part including the isolation rooms is for patients; the third part is for medical selection rooms to test the specimens. Secondly, the plan was compared with the MERS-Cov infection control guidelines. Finally this prototype is applied into the Yong-in Yon-sei severance hospital and then evaluated through a CFD simulation using STAR-CCM+(ver.9.06) for checking infectious bacterium movement in this prototype. The result showed that the prototype is effectively safe for patients tested as negative, patients waiting to be tested, and the medical team.

• Journal of Environmental Science International
• /
• v.30 no.12
• /
• pp.1005-1014
• /
• 2021

Organic contaminants can be released into water environments due to chemical accidents and exist as dissolved and non-aqueous phase liquids (NAPL). Fenton oxidation was tested for bisphenol A and nitrobenzene as model organic contaminants in dissolved and NAPL states. Fenton oxidation was successfully applied for both of the dissolved and NAPL states of the two pollutants and the results indicated that a quick treatment was needed to reduce the risk from a chemical accidents instead of carrying out oxidation after the contaminants dissolve in water. A set of Fenton reactions were tested under seawater conditions because chemical accidents often occurs in the ocean. Chloride ions act as radical scavengers and inhibit Fenton oxidation. The reaction rate is inversely proportional to salt contents and the reduced reaction rate can be compensated by increasing the quantity of the oxidizing agents. The current study showes that Fenton oxidation could be applied as a quick treatments for organic contaminant in dissolved and NAPL state organic contaminants released as a result of leaks or chemical accidents.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.6
• /
• pp.89-97
• /
• 2022

Ultrasonic metal welding has been widely used for joining lithium-ion battery tabs. Weld quality monitoring has been an important issue in lithium-ion battery manufacturing. This study focuses on the weld quality monitoring in ultrasonic metal welding with the longitudinal-torsional vibration mode horn developed newly. As the quality of ultrasonic welding depends on welding parameters like pressure, time, and amplitude, the suitable values of these parameters were selected for experimentation. The welds were tested via tensile testing machine and weld strengths were investigated. The dataset collected for performance test was used to train the multi-layer perceptron neural network. The three layer neural network was used for the study and the optimum number of neurons in the first and second hidden layers were selected based on performances of each models. The best models were selected for the horn and then tested to see their performances on an unseen dataset. The neural network models for the longitudinal-torsional mode horn attained test accuracy of 90%. This result implies that proposed models has potential for the weld quality monitoring.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.2
• /
• pp.110-116
• /
• 2023

In this study, samples of sea anchor canopy cloth mainly used in Korean jigging fishing vessels were collected and tested for performance evaluation. The canopy cloth of sea anchor is a basic element of form composition that is known to have the greatest influence on anchor performance. In order to evaluate the performance of sea anchor canopy cloth, five types of samples were tested for new metric count, tensile strength, water vapour transmission rate and drying speed according to the national standard (KS), and some correlations were identified. As a result of the test, the new metric count of cloths was 335.5-443.4 denier in warp and 217-447.6 denier in weft, and the minimum tensile strength was 860 N in warp direction and 430 N in weft direction. The apparent number and tensile strength of cloth were proportional, the water vapour transmission rate of the sample was 206.8 g/m²h, and the drying speed was 90-100 min. This study partially confirmed the performance evaluation based on speculation by the standard test method, and further research is needed on the clear relationship between the research results and the performance of the sea anchor.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.8
• /
• pp.2241-2258
• /
• 2023

This study developed digital literacy instruments and tested their effectiveness on college students' perceptions of AI technologies. In creating a new digital literacy test tool, we reviewed the concept and scale of digital literacy based on previous studies that identified the characteristics and measurement of AI literacy. We developed 23 preliminary questions for our research instrument and used a quantitative approach to survey 318 undergraduates. After conducting exploratory and confirmatory factor analysis, we found that digital literacy in the age of AI had four ability sub-factors: critical understanding, artificial intelligence social impact recognition, artificial intelligence technology utilization, and ethical behavior. Then we tested the sub-factors' predictive powers on the perception of AI's usefulness and ease of use. The regression result shows that the most common powerful predictor of the usefulness and ease of use of AI technology was the ability to use AI technology. This finding implies that for college students, the ability to use various tools based on AI technology is an essential competency in the AI era.

• Ocean and Polar Research
• /
• v.45 no.1
• /
• pp.1-9
• /
• 2023

Marine microalgae have different collection methods depending on their habitat. In the case of adhesive microalgae, it is difficult to separate organisms from the substrate surface, and contamination is likely to occur during the sampling process. In this study, we analyzed the collection efficiency of adhesive microalgae using three artificial fiber materials (nylon, blend fabric, and viscose rayon). Each fiber showed different fiber diameter and pore characteristics (nylon 26.09 ㎛, blend fabric 56.6 ㎛, viscose rayon 101.3 ㎛). In addition, attached organisms were collected on the surface of artificial substrates at Bukseong Port in Incheon using each tested fiber material. After that, we investigated the population and species composition. The highest number of cells was found in nylon, which was 8 times higher than in the least collected viscose rayon material. In addition, we identified 24 microalgal species from the substrate, demonstrating that the species composition differed from that of surface water. The number of collected microalgae species varied depending on the fiber materials, with nylon containing all the adhesive microalgae. In contrast, only a few microalgae were observed in other fibers. These results suggest that, of the tested fibers, nylon material may be suitable for collecting adhesive microalgae. As a result, this study may be useful for future research on adhesive microalgae.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.5
• /
• pp.1279-1288
• /
• 2024

This study selected the town area where parking problems occur. Parking lot users were divided into groups and parking consciousness was investigated. The statistical significance of each group was tested. This is a case study to reflect this result in the establishment and implementation of parking policies. The user group was divided into four, and a total of 264 people were surveyed. The user group was set as an independent variable, and current and future satisfaction was set as the dependent variable. Statistical significance was tested by conducting analysis of variance and paired sample t-test. The analysis results are as follows. By user group, the change in satisfaction score for improvement compared to the current was the largest in the group of visitors and shop owners. By item, improvement is required in the order of additional construction of parking spaces, strong crackdown on illegal parking, and free or reduced parking fees.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.677-682
• /
• 2020

To investigate the nexus between urban population, gross capital formation, and economic growth in the Kingdom of Saudi Arabia, yearly data was collected from the World Bank for the period 1974- 2018. Basic statistics test and correlation matrix was used to investigate the causal effect among the tested parameters, followed by Augmented Dickey-Fuller (ADF) stationary test, co-integration analysis by Johansen test after that Vector Auto-Correction Model for both short-run and long-run and finally the Granger-Causality tests. Result of unit root test analysis shows that the urban population became stationary at I (0) level while economic growth and gross capital formation became stationary at I (1). Johansen co-integration analysis indicates that there is presence of both long-run and short-run relationship between the three variables in the Kingdom of Saudi Arabia. The result of the VECM Model reflects that both economic growth and gross capital formation have a negative impact on urban population in the short run. According to the Granger-Causality tests, there is unidirectional causality with the urban population by both gross capital formation and economic growth. Also, the result of the Granger Causality tests show that there is unidirectional causality between economic growth and gross capital formations.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.3
• /
• pp.161-169
• /
• 2012

This paper presents a robust speech end-point detector using double talk detection in echoic conditioned speech recognition robot. The proposed method consists of combining conventional end-point detector result and double talk detector result. We have tested the proposed method in isolated word recognition system under echoic conditioned environment. As a result, the proposed algorithm shows superior performance of 30 % to the available techniques in the points of speech recognition rates.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.5 no.2
• /
• pp.3-12
• /
• 1995

A controller utilizing fuzzy logic is developed to control the speed of a motor in a washing machine by choosing an appropriate phase. Due to the hardship imposed on obtaining a result from a relation established for inputs, present speed and present rate of speed, and ouput, a phase, of the system that can be tested against an experimental result, it is impossible to apply a genetic algorithm to fine-tune the fuzzy logic controller. To avoid this difficulty, a proper assumption that the parameters of an if-part of a primary fuzzy logic controller have a functional relationship with an error between computed values and experimental ones in made. Setting up of a fuzzy relationship between the parameters and the errors is then achieved through experimentally obtained data. Genetic Algorithm is then applied to this secondary fuzzy logic controller to verify the fuzzy logic. In the verification process, the primary fuzzy logic controller is used in obtaining experimental results. In this way the kind of difficulty in obtaining enough experimental values used to verify the fuzzy logic with genetic algorithm is gotten around. Selection of the parameters that would produce the least error when using the secondary fuzzy logic controller is done with applying genetic algorithm to the then-part of the controller. In doing so the optimal values for the parameters of the if-part of the primary fuzzy logic controller are assumed to be contained. The experimental result presented in the paper validates the assumption.