• Journal of Sasang Constitutional Medicine
• /
• v.19 no.3
• /
• pp.176-187
• /
• 2007

1. Objectives The purpose of this research is to find out the Sasang Constitutional difference in Heart Rate Variability. 2. Methods We enrolled 8498 workers who tested for Heart Rate Variability(HRV) from September 1, 2005 to November 28, 2005 except works whose body constitusions were undetermined according to QSCCII. 3. Results & Conclusions The result of HRV of autonomic activity and stress resistance were arranged in the order of Soeumin, Soyangin and Taeumin. On the other hand Stress Index and Fatigue Index were arranged in the order of Taeumin, Soyangin and Soeumin. But autonomic balance was no significance relationship between Sasang Constitutions. This research has shown that there is a statistical significance between the HRV and Sasang Constitutions. The findings indicated that HRV could be useful mean to make a diagnosis of Sasang Constitution or apprehended Constitutional differences.

• Mycobiology
• /
• v.30 no.4
• /
• pp.213-218
• /
• 2002

The induction of NAD(P)H: quinone oxidoreductase(QR), glutathione S-transferase(GST), and glutathione(GSH) levels in hepa1c1c7 cells(murine hepatoma) by waxy brown rice cultured with Phellinus igniarius to induce anticarcinogenic enzymes were measured. In addition, the inhibition of polyamines metabolism was tested with the growth of Acanthamoeba castellanii. The result shows that QR, GST activities, and GSH levels of experimental animals were increased much more by feeding the methanol extract of waxy brown rice cultured with Phellinus igniarius than those of the rats received the ethanol of uncultured brown rice. The growth of A. castellanii was inhibited mostly at 40 mg/3 ml concentration of methanol extract of waxy brown rice cultured with P. gniarius. The results suggested that waxy brown rice cultured with P. igniarius possess chemopreventive activity by inducing anticarcinogenic enzymes and inhibiting polyamine metabolism.

• Journal of Welding and Joining
• /
• v.21 no.2
• /
• pp.50-56
• /
• 2003

Metal matrix composites(MMC) consist of metal matrix into which is distributed a second solid phase. The normal intension is to develop a material with superior mechanical properties (for example increased toughness, stiffness and wear resistance) compared to those inherent in the matrix component. In this study, WC-12%Co/low carbon steel MMC overlays have been prepared by Gas Metal Arc Welding(GMAW) according to feeding rate of WC-12%Co grit. The macro and microstructures were examined using optical microscopy (OM) and scanning electron microscopy(SEM) each other. The characteristics of hardness and wear resistance have been investigated. WC-12%Co/low carbon steel MMC overlays which have been taken good beads without porosity and cracks were manufactured by method of GMAW. Matrix of overlayed surface was seen as fish bone and faceted dendrite structures. It was known that structures were iron tungsten carbides, Fe$_{6}$W$_{6}$C which have been occurred by melting of WC-12%Co grits. After MMC had been tested by block-roll wear test it was known that WC-12%Co/low carbon steel MMC has a excellent wear resistance by exiting Fe6w6c and WC-12%Co grit. The consequence was that region of overlay with Fe$_{6}$W$_{6}$C phase has been showed a model of adhesive wear, but region of overlay with WC-12%Co grit was restrained as a result of mechanism that wear of WC-12%Co grit is not adhesive but fracture.racture.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.13-20
• /
• 2012

In this paper, we present the result of an investigation pertaining to the pipe stiffness of buried flexible pipes. Pipe stiffness (PS) formula for the parallel plate loading condition is derived based on the elasticity theory. Vertical and horizontal displacements are also derived. Vertical deflection is always larger than the horizontal deflection because some of energy due to overburden load is stored in the pipe but the difference is negligibly small. In the study, mechanical properties of the flexible pipes produced in the domestic manufacturer are tested and the results are reported in this paper. In addition, pipe stiffness is determined by the parallel plate loading tests and the finite element analysis. The difference between test and analysis is less than 14% although there are significant variations in the mechanical properties of the pipe material. Therefore, it was found that the finite element analysis can be used to predict the pipe stiffness instead of conducting parallel plate loading test.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.1
• /
• pp.27-35
• /
• 2018

The stability of liquid ferrate(VI) produced by an innovative method was confirmed and the degradation characteristics of cyclic compounds(Benzene, Aniline, Toluene, 1,4-Dioxane) by liquid ferrate(VI) were investigated under the same reaction conditions. When it was compared with the ferrate manufactured by the wet oxidation method, the liquid ferrate was more stable. And the stability of liquid ferrate was tested at the storage temperature. As a result, only 17.7% of liquid ferrate(VI) has decomposed at the storage temperature($4^{\circ}C$) for 28 days. Among the cyclic compounds, the aniline was rapidly degraded compare to other cyclic compounds, which seems to be due to the electron-donating ability of the substituent, $-NH_2$ group. Especially, when 1,4-dioxane was compared with benzene, the decomposition rate of 1,4-dioxane was lower than that of benzene, suggesting that oxygen atoms hinder the electrophilic reaction. Among 4 cyclic compounds, it was observed that aniline has the highest rate constant than those of other cyclic compounds.

• Journal of the Korean Vacuum Society
• /
• v.8 no.4A
• /
• pp.490-495
• /
• 1999

In 0.18 $\mu \textrm m$ LOGIC device, the etch rate of NMOS polysilicons is different from that of PMOS polysilicons due to the state of polysilicon to manufacture gate line. To control the etch profile, we tested the ratio of $Cl_2$/HBr gas and the total chamber pressure, and also we reduced Back He pressure to get the vertical profile. In the case of manufacturing the gate photoresist line, we used Bottom Anti-Reflective Coating (BARC) to protect refrection of light. As a result we found that $CF_4O_2$ gas is good to etch BARC, because of high selectivity and good photoresist line profile after etching BARC. in the results of the characterization of plasma damage to the antenna effect of gate oxide, NO type thin film(growing gate oxide in 0, ambient followed by an NO anneal) is better than wet type thin film(growing gate oxide in $0_2+H_2$ ambient).

• Water for future
• /
• v.29 no.5
• /
• pp.129-138
• /
• 1996

Loopnet model was developed to simulate unsteady flow in the looped network channel, considering change of the time and space. In this study, the looped solution algorithm was derived and the accuracy and stability of the model was tested. The Gulpo river system was used to calculate the flood water levels considering the hydraulic structures, tidal effect and inflow hydrographs. The result of the simulation showed that the accuracy and stability of this model was reliable. The change of flood water level of the Gulpo River system and the spillway section were not greatly affected by the operation water level of the navigation channel. But this analysis showed that roughness was one of the very important physical factor in changing flood water level.

• KSTLE International Journal
• /
• v.4 no.2
• /
• pp.47-51
• /
• 2003

Sliding wear tests have been carried out in room temperature air and water in order to compare the wear resistance of Zr-xNb-xSn alloys of various alloying elements (Nb and Sn). The main focus was to quantitatively compare the wear properties of the recently developed Zr-xNb-xSn alloys with the commercial ones using the evaluation parameters of the wear resistance with the consideration of the worn area. As a result, the recently developed alloys had a similar wear resistance compared with the commercial ones. The dominant factor governing the wear resistance was the protruded volume of the wear debris that was formed on the worn area in the air condition, but the accommodation of the plastic deformation on the contact area in water. In addition, the worn area size appeared to be very different depending on the tested alloys. To evaluate the wear resistance of each test specimen, the ratio of the wear volume or the protruded volume to the worn area ($D_e$ or $D_p$) is investigated and proposed as the evaluation parameters of the wear resistance.

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.84-87
• /
• 2015

For large optical elements which are tested by many sub-apertures, it takes too much time for a sub-aperture stitching algorithm to get the stitching result. To solve this problem, we propose a fast sub-aperture stitching algorithm to quickly compensate for piston, tilt, and defocus errors. Moreover, the new algorithm is easy to understand and program. We use partial derivatives of measurement data to separately solve piston, tilt, and defocus errors. First, we show that the new algorithm has a lower time complexity than the currently used algorithm. Although simulation results indicate that the accuracy of the new algorithm is lower than the current algorithm in all 20 simulations, our experimental results validate the algorithm and show it is sufficiently accurate for general use.

• Journal of Broadcast Engineering
• /
• v.6 no.2
• /
• pp.160-168
• /
• 2001

In this paper, we propose a new practical motion model that can exploit the general properties of camera motion in constructing a panorama. accounting for panning. tilting, and evert the change in focal length of the camera. We also present an efficient algorithm to handle moving objects or noose in the scene based on outliers rejection. Spatial and temporal statistical properties of motion field are exploited to detect the outliers. The proposed algorithm removes moving objects or noise from the panoramic Image so that mode clear and complete view of the background Image can be obtained. This method does not require assumptions or a priors knowledge of the scene. The entire process is fully automatic as this method does not require any manual correction in the process of constructing a Panorama. The proposed algorithm is tested on the broadcasting images of soccer games. Oun simulation result shows that this method is superior to conventional image mosaicing algorithms.