• Korean journal of applied entomology
• /
• v.34 no.1
• /
• pp.40-45
• /
• 1995

Eight field-collected populations of the two-spotted spider mites, Tetranychus urticae (Koch) from apple orchards of different geographical areas were tested for resistance to seven acaricides by leaf disk method in comparison with a susceptible strain. Marked regional variations of susceptibility were observed. Only low to moderate resistance to azocyclotin, fenpropathrin, propargite, and abamectin was obtained. However, high resistance to dicofol, fenpyroxymate, and pyridaen by eight field-collected populations was produced. Resistance to dicofol and fenpyroxymate was widespread. All of the strains tested were susceptible to one or more o the acaricides used. These results indicate that careful selection of the chemical used against any population of the two-spotted spider mite might result in satisfactory control.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1236-1241
• /
• 2007

The feasibility of soil washing was investigated in the laboratory to treat heavy metals-contaminated railway soil. Various organic acids including ethylene diamine tetraacetic acid (EDTA) and citric acid as well as inorganic acids such as hydrochloric acid (HCl) and phosphoric acid were tested to evaluate washing efficiency. Generally, inorganic acid showed higher removal efficiency compared to organic acids. Specially, EDTA, which are well known as most effective washing agent to remove heavy metals from soil, was not efficient to remove heavy metals in this study. Among washing agents tested in this study, HCl was most effective. The removal of Cd, Cu, and Pb was high, however, that for Zn and Ni was less than 30% with 0.5 M HCl. This difference comes from analytical methods (Korean Standard Test Method for Soil). Aqua regia was used to extract Zn and Ni, however 0.1 N HCl was used for other metals. As a result, simple washing technology is not effective, to treat railway contaminated soil with heavy metals.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.1-8
• /
• 2014

For this study, a 160Ah Ni-MH battery is produced with parallel arranged two 80Ah Ni-MH batteries as an unit, in order to start diesel generator(engine) in place of Lead Acid battery or Ni-cd battery which contain indicated toxic pollutant of Environmental pollution, by high capacity Ni-MH battery. And the ternary electrolyte recipe is requested to develop proper electrodes of the 160Ah Ni-MH battery, and then the 160Ah battery can be tested at high rate discharging performance. Zn is added to negative electrode for the improvement of performance. 160Ah Ni-MH battery has been tested in various experiments for diesel engine starting. As the result, diesel engine starting is found successfully.

• Korean Journal Plant Pathology
• /
• v.14 no.3
• /
• pp.191-202
• /
• 1998

About 300 actinomycetes were isolated from two forest and one sea-shore soil and tested for inhibitory effects on mycelial growth of six plant pathogenic fungi Magnaporthe grisea, Alternaria mali, Colletotrichum gloeosporioides, Phytophthora capsici, Fusarium oxysporum f. sp. cucumerinum, and Rhizoctonia solani. Among 300 actinomycetes tested, only 16 actinomycetes showed the antifungal activity against the test fungi. Isolate NH 50 was selected for production and purification of antifungal antibiotic substances. Actinomycete isolate NH 50 displayed the broad antifungal spectra against 11 plant pathogenic fungi. To identify actinomycete isolate NH 50, cultural characteristics on various agar media, diaminopimelic acid type, and morphological characteristics by scanning electron microscopy were examined. As a result, actinomycete isolate NH 50 was classified as a rare actinomycete that had LL-DAP type and did not produce spores. After incubation of isolate NH 50 in yeast extract-malt extract-dextrose broth, antifungal compound NH-B1 that inhibited mycelial growth of some plant pathogenic fungi was purified from the methanol eluates of XAD-16 resins by a series of purification procedures, i.e., silica gel flash chromatography, C18 flash chromatography, Sephadex LH-20 column chromatography, silica gel medium pressure liquid chromatography (MPLC), C18 MPLC, and high pressure liquid chromatography (HPLC). UV spectrum and 1HNMR spectrum of antifungal compound NH-B1 dissolved in methanol were examined. The antibiotic NH-B1 showed the major peaks at 230 and 271.2nm. Based on the data of 1H-NMR spectrum, NH-B1 was confirmed to be an extremely complex polymer of sugars called polysaccharides. The antibiotic NH-B1 showed strong antifungal activity against Alternaria solani and Cercospora kikuchi, but weak activity against M. grisea.

• Transactions of Materials Processing
• /
• v.18 no.4
• /
• pp.296-303
• /
• 2009

The effect of porosity on the high-cycle fatigue properties of Al-Si-Mg casting aluminum alloys was investigated in this study. Microstructure examination, tensile and high-cycle fatigue test were conducted on both Al-Si-Mg casted (F) and heat-treated (T6) conditions. Porosity characteristics on the fracture surfaces of fatigue-tested samples were examined using SEM and image analysis. The microstructure observation results showed that eutectic Si particles were homogeneously dispersed in the matrix of the Al-Si-Mg casting alloys, but there were porosities formed as cast defects. The high-cycle fatigue results indicated that the fatigue strength of the 356-T6 alloy was higher than that of the 356-F alloys because of the significant reduction in volume fraction of pores by heat treatment. The SEM fractography results showed that porosity affected detrimental effect on the fatigue life: 80% of all tested samples fractured as a result of porosity which acted as the main crack initiation site. It was found that fatigue life decreased as the size of the surface pore increased. A comparison was made between surface pore and inner pore for its effect on the fatigue behavior. The results showed that the fatigue strength with the inner pores was higher than that of the surface pore.

• Korean Journal of Social Welfare
• /
• v.48
• /
• pp.7-41
• /
• 2002

This paper analyses the proposals contained in the British Government Green Paper, A New Contract for Welfare: Partnership in Pensions for low paid workers and the potential of the new rules to guarantee a decent income in old age. The UK pension system is a partnership between the State(providing the basic state pension and the SERPS), employers(providing occupational pension scheme) and private pension providers(providing personal pensions). Although the system needs to change, this partnership remains the right foundation. However, the pension Green Paper proposes substantial changes to second tier pension provision in the UK. In particular, the Government plans to replace the SERPS with a new State Second Pension. According to the Green Paper, this will result in "dramatically better pension provision for those earning less than ${\pounds}9,000$ a year" and through increased payments to private pension schemes, will also provide "extra help to those on middle incomes(${\pounds}9,000-{\pounds}18,500$ a year). Therefore, it discusses the general principles inherent in the design of the British pension system and analyses the balance of these principles is represented in the Green Paper. The paper then examines how the Government's proposals protect individuals from a means-tested old age. This paper finds that the Green paper's proposals add up to reinventing a new two-stage basic pension. However, two key features of a such a basic pension package are missing- an 'adequate' level of payment and comprehensive entitlement. Because of these missing principles we argue that the Green Paper's proposals incorporate for the low paid. The income from the basic pension and the secondary pension which is so near the means-tested minimum that little is gained in retirement from a lifetime of work and contribution. Indeed, the shift away from collective provision and the emphasis on individual responsibility will reinforce this inequality, so that many poor will continue to experience poverty in later life.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.135-145
• /
• 2011

As communication technology, an enabling technology for ITS, becomes diversified with DSRC, CDMA, Wireless LAN, it is expected that type and function of ITS services will become gradually expanded. As a result, research and development of a standard platform that can provide support so that numerous communication technologies that are being used in various ITS services to receive various ITS services can be operated in one integrated terminal are being carried out. On Board Unit (OBU) for a recent standard platform was also built and tested recently. However, verification for standard suitability of the standard platform OBU that was developed must be carried out. Standard technology must be realized and sufficient functional and operational testing must be carried out in order to guarantee efficient operation in an actual ITS system and increase utilization of standard technology. Therefore, In this paper we had constructed test road and we had tested a standard platform OBU for a standard application.

• Journal of Radiation Protection and Research
• /
• v.25 no.4
• /
• pp.197-205
• /
• 2000

A prototype electronic dosimeter(PED) adopting a silicon PIN diode detector as a radiation detector has been developed, manufactured and test-evaluated. A radiation signal processing circuit has been electronically tested and then the radiation detection characteristics of this PED has been performance-tested by using a reference photon radiation field. As a result in a electronic performance test, radiation signals from a detector were well observed in the signal processing circuit. The radiation detection sensitivity of this PED after several test-irradiations to $^{137}Cs$ gamma radiation source appeared to be 1.85 cps/$Gy{\cdot}h^{-1}$ with 19.3% of the coefficient of variation, which satisfied the performance criteria for the active personnel radiation monitor. Further improvement of the electronic circuit and operating program will enable the PED to be used in personal monitoring purpose.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.5
• /
• pp.43-50
• /
• 2003

This presents a fault detecting method for a power transformer based upon a neural network. To maintain a normal relay operating conditions, external winding faults of a power transformer and magnetic inrush have been tested under consideration of the EMTP/ATP software and internal faults of power transformer have been tested by the EMTP/BCTRAN software. The neural network has been evaluated by the proposed fault. Input variables of the neural network for the proposed model can be obtained from fundamental currents, restraining and operating currents. This algorithm uses back-propagation and the ratio of a restraining current and an operating current as relay input parameters. The ratio may enhance the fault detection since the restraining currents increase rapidly at external faults. The proposed detecting method has been applied to the practical relay systems for transformer protection. As a result, the proposed detecting method based on the neural network has been shown to have better characteristics.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.7
• /
• pp.1031-1038
• /
• 2002

The pressure sensitive paint (PSP) has recently received a considerable attention in the fields of aerodynamics and fluid mechanics as a new revolutionary optical technique to measure pressure fields on a body surface. In this study, the feasibility and effectiveness of the PSP pressure field measurement technique have been investigated experimentally. Seven different PSP formulations including two porphyrins(PtOEP and PtTFPP) and four polymers(Polystyrene, cellulous acetate butyrate, GP-197 and Silicon-708) were tested to check the performance and characteristics of each combination. The static calibration of each PSP formulation was carried out in a constant-pressure chamber. The PSP technique was applied to an oblique impinging jet flow to measure variation of pressure field on the impinging plate at on oblique jet angle of ${\theta}=60^{\circ}$. Pressure field images were captured by an 12bit intensified CCD(ICCD, $1K{\times}1K$)camera. As a result, the dynamic response of PSP depends on the oxygen permeability of polymer and the photochemical interaction between luminophore and polymer as well as the reaction of luminophore itself. The reaction of luminophore was changed by employing different polymers. In conclusion, Among 7 PSP formulation tested, the combination of PtTFPP and cellulous acetate butyrate show the best performance. In addition, the detail pressure field of an oblique high-speed impinging jet was measured effectively using the PSP technique.