• Journal of Aerospace System Engineering
• /
• v.5 no.1
• /
• pp.30-35
• /
• 2011

Certification flight test is very risky and there are many hazards. Because the flight test is performed with the aircraft, that is safety and flight characteristics are not proven. And the test items and conditions are critical. If there is loss of aircraft during certification flight test, the certification program, development period can be delayed. Therefore, maintaining safety of the aircraft during flight test is very important. There are not much flight test experiences in Korea. However, developed nations has long history of flight test and experiences of flight test accidents. Based on these experiences, they has developed systematic management methods for the flight test safety. In this study, I would like to introduce safety management and risk assessment of the certification flight test.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.71-78
• /
• 2013

In highly reliable and durable systems, failures due to aging might result in catastrophes. Aging monitoring techniques to prevent catastrophes by predicting such a failure are required. Aging can be monitored by performing a delay test at faster clocks than functional clock in field and checking the current delay state from the test clock frequencies at which the delay test is passed or failed. In this paper, we focus on test clock control scheme for a system-on-chip (SoC) with multiple clock domains. We describe limitations of existing at-speed test clock control methods and present an on-chip faster-than-at-speed test clock control scheme for intra/inter-clock domain test. Experimental results show our simulation results and area analysis. With a simple control scheme, with low area overhead, and without any modification of scan architecture, the proposed method enables faster-than-at-speed test of SoCs with multiple clock domains.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.455-462
• /
• 2002

There exist several kinds of continuous consolidation tests to analyze the consolidation behavior of soft clay. The constant rate of strain (CRS) test has been adopted as a standard method by several countries, and some researches also have been peformed by domestic researchers. Among those, the constant pressure ratio (CPR) test is peformed with the constant ratio of excess porewater pressure to vertical effective stress. The test has the advantage of considerable reduction of duration time. In the study, the consolidation characteristics are analyzed by performing the CPR test as validate the pressure ratio with undisturbed soft clay and remolded clay, Also, results of the standard consolidation test and CRS test are compared to verify the CPR test can be employed for practical use. As a result, effects of variation of the pressure ratio on consolidation parameter are similar to the strain rate in the CRS test. Therefore, the test can be used to analyze the consolidation behavior of soft clay But the test have some problems such as expensive cost of equipment and highly skilled workmanship.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.6
• /
• pp.784-796
• /
• 2019

As the size and complexity of software increases, it is important to ensure the quality of software through testing. Many organizations refer to international standards or test process models to improve the quality of software through establishing a systematic test process. However, these standards and process models provide general processes that do not reflect the characteristics of the domain or the organization's test policies and strategies. To establish a test process that reflects the characteristics of the organization, test policies and strategies based on the organization's quality objectives and the organizational and domain characteristics should be reflected. This study proposes specific methods for eliciting activities and information to establish organizational software test policies and strategies that are essential to establishing a test process that reflects the characteristics of the organization and the system.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.67-74
• /
• 2018

The verification for the design limit margin of the power device for the information communication and surveillance systems using HALT(Highly Accelerated Life Test) reliability test is described. The HALT reliability test performs with a step stress method which change condition until the marginal step in a design and development phase. The HALT test methods are the low temperature(cold) step stress test, the high temperature(hot) step stress test, the thermal shock cyclic stess test, and the high temperature destruct limit(hot DL) step stress test. The power device is checked the operating performance during the test. In this paper, the HALT was performed to find out the design limit margin of the power device.

• Journal of Korean Society for Quality Management
• /
• v.23 no.4
• /
• pp.52-57
• /
• 1995

Testing problem of equality between two linear regressions is considered. Chow test is discussed and likelihood ratio test(LR test), F-test and Score test are derived. Score test are compared with other tests and show they are asymptotically equivalent.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.2
• /
• pp.485-493
• /
• 2004

This paper considers the test of money and income causality. Jeong (1991, 2003) developed a nonparametric causality test based on the kernel estimation method. We apply the nonparametric test to USA data of money and income. We also compare the test results with ones of the conventional parametric test.

• Proceedings of the PSK Conference
• /
• 2000.04a
• /
• pp.192.1-192.1
• /
• 2000

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.5
• /
• pp.921-935
• /
• 2016

This research analyzed the manual performance of firefighting protective gloves on global markets in order to suggest an evaluation method for firefighting protective gloves wearing comfort. We collected 13 types of firefighting gloves from domestic and international markets (7 types from Korea, 3 types form Europe, 2 types from the U.S and 1 type from Japan). We set the Don-Doff test as a basal requirement for moving toward to further manual performance tests that consist of: ASTM dexterity test, Minnesota dexterity test, Bennett hand tool test and ASTM torque test. All gloves were evaluated in dry and wet conditions, we included eight current male firefighters ($43.4{\pm}7.0yr$ in age, $173.1{\pm}4.4cm$ in height, $79.9{\pm}9.2kg$ in body mass) for the tests. Four gloves (1 Korea, 1 U.S, 1 Germany, and 1 Japan) out of thirteen firefighting gloves passed the Don-Doff test and had great subject preferences. There was no significant difference between dry and wet conditions on the ASTM dexterity test, Minnesota dexterity test, Bennett hand tool test and ASTM torque test. However, Japanese gloves had the greatest score and showed 3-4 times faster completion time on the ASTM dexterity test (p<.05), 1.2-1.5 times faster on the Minnesota dexterity test (p<.05), as fast as the bare hand on Bennett hand tool test (p<.05), and greater performance on the ASTM torque test compared to bare hand. In conclusion, Don-Doff test in wet conditions should be the first step for a mobility evaluation of domestic firefighting protective gloves; subsequently, a comprehensive test assorting ASTM, Minnesota, and Bennett test should be developed as a second step. The current ASTM torque test can be adopted as a third step. This three-step-method for evaluating firefighting protective glove mobility can be expected to expand into surveys of other safety gloves in Korea.

• Journal of Yeungnam Medical Science
• /
• v.34 no.1
• /
• pp.29-36
• /
• 2017

Background: Saccade test, smooth pursuit test, and optokinetic nystagmus test are clinically useful tests to accurately diagnose vertigo. However, there have only been a few studies regarding a correlation between the anatomical site of the lesion and the abnormality of eyeball movement in patients with vertigo. Methods: The medical records of 97 patients with vertigo between January 2006 and June 2008 were reviewed retrospectively. We classified many kinds of abnormalities regarding the saccade test, smooth pursuit test and optokinetic nystagmus test into several categories and analyzed the localizing lesion of vertigo. Results: According to the saccade test, both total saccade abnormality (S-total) and slow velocity of saccade (S-type 3) were shown to be significantly higher in the central lesion of vertigo. According to the smooth pursuit test, symmetrical unidirectional smooth pursuit abnormality (SP-type 2) was observed to be significantly higher in the peripheral lesion over vertigo. Moreover, according to the optokinetic nystagmus test, total optokinetic nystagmus abnormalities (OKN-total) were shown to be significantly useful findings in the diagnosis of the central lesion of vertigo. The coexisting abnormalities of all three tests (S+SP+OKN abnormalities) were shown to be significantly higher in the central lesion of vertigo. Conclusion: These results suggest that all these tests, saccade test, smooth pursuit test, and optokinetic nystagmus test, are very useful to distinguish between the central lesion and the peripheral lesion of vertigo. However, these tests are not beneficial in localizing the central lesion of vertigo.