• 제목/요약/키워드: test coverage

검색결과 528건 처리시간 0.029초

$\textrm{I}_{DDQ}$ 테스팅을 위한 빠른 재장형 전류감지기 (Fast built-in current sensor for $\textrm{I}_{DDQ}$ testing)

  • 임창용;김동욱
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1998년도 하계종합학술대회논문집
    • /
    • pp.811-814
    • /
    • 1998
  • REcent research about current testing($\textrm{I}_{DDQ}$ testing) has been emphasizing that $\textrm{I}_{DDQ}$ testing in addition to the logical voltage testing is necessary to increase the fault coverage. The $\textrm{I}_{DDQ}$. testing can detect physical faults other than the classical stuck-at type fault, which affect reliability. One of the most critical issues in the $\textrm{I}_{DDQ}$ testing is to insert a built-in current sensor (BICS) that can detect abnormal static currents from the power supply or to the ground. This paper presents a new BICS for internal current testing for large CMOS logic circuits. The proposed BICS uses a single phase clock to minimize the hardware overhead. It detects faulty current flowing and converts it into a corresponding logic voltage level to make converts it into a corresponding logic voltage level to make it possible to use the conventional voltage testing techniqeus. By using current mirroring technique, the proposed BICS can work at very high speed. Because the proposed BICS almost does not affects normal operation of CUT(circuit under test), it can be used to a very large circuit without circuit partitioning. By altenating the operational modes, a circuit can be $\textrm{I}_{DDQ}$-tested as a kind of self-testing fashion by using the proposed BICS.

  • PDF

가정간호수가 적정성 검증 및 수가체계 개선 방안 (Test on the Cost and Development on the Payment System of Home Health Care Nursing)

  • 유호신;정기선;임지영
    • 대한간호학회지
    • /
    • 제36권3호
    • /
    • pp.503-513
    • /
    • 2006
  • Purpose: This study focused on analysing costs per home health care nursing visit based on home health care nursing activities in medical institutes. Method: The data was collected in three stages. First, the cost elements of home health care nursing services were collected and 31 home care nurses participated. Second, the workload and caseload of home care nursing activities were measured by the Easley-Storfjell Instrument(1997). Third, the opinions on improving the home health care nursing reimbursement system were collected by a nation-wide mailing survey from a total of 125 home care agencies. Result: The cost of home health care nursing per visit was calculated as 50,626\. This was composed of a basic visiting fee of $35,090{\\}({\fallingdotseq}355$)$ and travel fee of $15,536{\\}({\fallingdotseq}15$)$. The major problems of the home care nursing payment system were the low level of the cost per visit, no distinction between first visit and revisits, and the limitations in health insurance coverage for home health care nursing services. Conclusion: This study's results will contribute as a baseline for establishing policies for improvement of the home health care nursing cost and for applying a community-based visiting nursing service cost.

ITO 박막의 표면 거칠기에 따른 OLED 소자의 특성 (Effect of the Surface Roughness of ITO Thin Films on the Characteristics of OLED Device)

  • 이봉근;이규만
    • 반도체디스플레이기술학회지
    • /
    • 제8권4호
    • /
    • pp.49-52
    • /
    • 2009
  • We have investigated the effect of the surface roughness of TCO substrate on the characteristics of OLED (organic light emitting diodes) devices. In order to control the surface roughness of ITO thin films, we have processed photolithography and reactive ion etching. The micro-size patterned mask was used, and the etching depth was controlled by changing etching time. The surface morphology of the ITO thin film was observed by FESEM and atomic force microscopy (AFM). And then, organic materials and cathode electrode were sequentially deposited on the ITO thin films. Device structure was ITO/$\alpha$-NPD/DPVB/Alq3/LiF/Al. The DPVB was used as a blue emitting material. The electrical characteristics such as current density vs. voltage and luminescence vs. voltage of OLED devices were measured by using spectrometer (minolta CS-1000A). The current vs. voltage and luminance vs. voltage characteristics were systematically degraded with increasing surface roughness. Furthermore, the retention test clearly presented that the reliability of OLED devices was directly influenced with the surface roughness, which could be interpreted in terms of the concentration of the electric field on the weak and thin organic layers caused by the poor step coverage.

  • PDF

전외측 대퇴부 천공지 유리피판을 이용한 하지 재건 (Reconstruction of Lower Extremities using Anterolateral thigh Perforator Free Flaps)

  • 김태곤;강민구
    • Journal of Trauma and Injury
    • /
    • 제20권2호
    • /
    • pp.119-124
    • /
    • 2007
  • Purpose: Management of the soft tissue defect in the lower extremity caused by trauma has always been difficult. Coverage with local and free muscle flaps after complete surgical excision of necrotic soft tissue and bone is a major strategy for treatment. There is no doubt that muscle provides a good blood supply, thus improving bone healing and increasing resistance to bacterial inoculation. However, accompanying problems are seen in cases with shallow dead space. This research was conducted to assess the efficacy of raising anterolateral thigh flaps and transferring them to the defect after complete debridement of non-viable, infected, and scar tissue as an alternative way to use local or free muscle flaps. Methods: From March 2005 to October 2007, 18 cases of soft tissue defect on lower extremities were re-surfaced with an anterolateral thigh perforator free flap. Results: The follow-up period ranged from 1 to 31 months with a mean of 15.9 months. All flaps survived completely. Satisfactory aesthetic and functional results were achieved. Under a two-point discrimination test, 13 patients had sensory recovery from 11 mm to 20 mm after 6 months postoperatively. Conclusion: Reconstruction of the lower extremity with anterolateral thigh perforator free flaps after appropriate debridement is a good alternative way to use local or free muscle flaps.

IEEE 802.11s 무선메쉬 기반 AMI 시스템에 관한 연구 (Study on AMI System based on IEEE 802.11s Mesh Technology)

  • 김영현;명노길;김명수;이상염
    • 전자공학회논문지
    • /
    • 제50권9호
    • /
    • pp.100-106
    • /
    • 2013
  • AMI는 스마트미터를 기반으로 전력소비자와 생산자간에 양방향 정보 교환을 가능하게 함으로서 에너지 효율을 극대화시키는 시스템이다. AMI 시스템을 성공적으로 구축하기 위해서는 안정된 통신망 구축이 필요하다. 본 논문은 다양한 통신방식 중 IEEE 802.11s 무선메쉬 기술을 AMI 시스템에 적용해 봄으로서 원격검침 통신망으로 활용가능성을 검증한다. 실험 결과, 802.11s 무선기술은 메쉬망을 통해 넓은 커버리지 뿐만 아니라 안정된 통신성능을 제공하는 것을 확인할 수 있었다.

Differences in Health Promoting Lifestyle Behavior of Health Management Students Based Upon Early Diagnosis Coverage in a Cancer Course

  • Ozveren, Husna;Cerit, Birgul;Ertop, Nesime Guzel
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제14권10호
    • /
    • pp.5769-5773
    • /
    • 2013
  • Background: This is a descriptive study to determine whether coursework that is focused on early diagnosis in cancer makes a difference in self-reported health promoting lifestyle behavior of students who study health management. Materials and Methods: The population of the study consisted of a sample of 104 students enrolled in the Department of Health Management at the Faculty of Health in Kirikkale University in Turkey. Forty-eight students enrolled in a course called "Early Diagnosis of Cancer" and fifty-six did not take this course. Demographic information was collected and the "Health Promotion Life-Style Profile (HPLP)" was used to collect health promotion data. Frequency and descriptive statistics including one-way ANOVA, Mann-Whitney U test, Kruskal Wallis tests were used to evaluate data. Results: The HPLP mean score of the students was found to be $127.5{\pm}17.45$. The highest mean score was observed for self-fulfillment and health responsibility, while the lowest was for diet and exercise sub-scales. It was found that certain variables were effective in developing health promoting lifestyle behaviors such as choosing this job voluntarily, working status of father and participation in social activity (p<0.05). In conclusion, it was found that the students had moderate levels of health promoting lifestyle behavior and they should be supported in terms of diet and exercise.

Study on Automatic External Defibrillators deployed at General Supermarkets

  • PARK, Sang-Kyu;KIM, Jee-Hee;UHM, Tai-Hwan
    • 유통과학연구
    • /
    • 제17권12호
    • /
    • pp.63-70
    • /
    • 2019
  • Purpose: This study was to propose effective deployment of automatic external defibrillators (AEDs) installed at general supermarkets. Research design, data, and methodology : We conducted interview and data surveys on 72 large distributors in Seoul and Gyeonggi province in South Korea. The content of this survey was consisted of general status on the general supermarkets, AED deployment and management regarding public access defibrillation (PAD). GPower (v 3.1.9.4; Universität Kiel, Kiel, Germany) was also used to analyze statistical power. Radius and actual distance, radius and retrieval time were compared by t-test at α=.05. respectively. Results : Difference between the radius (102.7 meters) and the actual distance (187.8 meters) was 85.1m, it had statistically significant difference (p<.001). The actual distance was longer compared to the radius distance. Difference between the radius (114.1 seconds) and the retrieval time (208.7 seconds) was 94.6s, it had statistically significant difference (p<.001). The retrieval time took longer compared to the radius time as well. Conclusions : The finding shows that only 45.9% of the general supermarkets are satisfied with the actual AED coverage within 3 minutes. This needs to enhance AED deployment to reduce defibrillation time and AED management to boost application in South Korea.

The Improvement of Infrared Brightness Temperature Difference Method for Detecting Yellow Sand Dust

  • Ha, Jong-Sung;Kim, Jae-Hwan
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.149-152
    • /
    • 2007
  • The detection of yellow sand dust using satellite has been utilized from various bands from ultraviolet to infrared channels. Among them, Infrared channels have an advantage of detecting aerosols over high reflecting surface as well as during nighttime. Especially, brightness temperature difference between 11 and 12{\mu}m(BTD) was often used to distinguish between water cloud and yellow sand, because Ice and liquid water particles preferentially absorb longer wavelengths while aerosol particles preferentially absorb shorter wavelengths. We have found that the BTD significantly depends on surface temperature, emissivity, and zenith angle and thereby the threshold of BTD. In order to overcome these problems, we have constructed the background brightness temperature threshold of BTD and then subtracted it from BTD. Along with this, we utilized high temporal coverage of geostationary satellite, MTSAT-1R, to verify the reliability of the retrieved signal in conjunction with forecasted wind information. The statistical score test illustrated that this newly developed algorithm showed a promising result for detecting mineral dust by reducing the errors in the current BTD method.

  • PDF

함정 획득시스템 개선을 위한 제품구조 중심의 기본설계시스템 (Basic Design System Centered on Product Structure for Improvement of Naval Ship Acquisition Systems)

  • 오대균;민영기
    • 대한조선학회논문집
    • /
    • 제48권3호
    • /
    • pp.215-221
    • /
    • 2011
  • To improve the naval ship acquisition process, systems engineering, modeling and simulation, etc. have been introduced, and there has been ongoing research on acquisition systems for effective support of it. However, due to characteristics of the naval ship acquisition process, development process mainly carried out at a shipyard such as basic design, detailed design, construction and test is difficult to integrate with the acquisition systems of IPT(Integrated Project Team). In addition, research aimed to improve this is rather lacking. In this paper, the naval ship product structure concept proposed in previous research was applied to the basic design system at shipyard, and basic research for expanding the coverage of naval ship acquisition systems to the basic design phase is performed. A data structure of modeling system appropriate to the basic design phase was proposed through research findings and the prototype system based on it was implemented.

연속섬유보강토공법의 하천구역 적용사례에 관한 연구 (Application of Continuous Fiber Soil Reinforcement System in Riparian Slopes)

  • 고정현;허영진;최재용
    • 한국환경복원기술학회지
    • /
    • 제14권3호
    • /
    • pp.169-176
    • /
    • 2011
  • The purpose of this study is to examine the ecologically suitable restoration characteristics in riparian slopes constructed by continuous fiber soil reinforced system (Geofiber system) which does not contain the concrete materials. The findings are as follows : (1) as the tested soil was not washed away by rainfalls and floods, Geofiber could replace the concrete wall and gravity stone net bag technique from the civil engineering structural point of view; (2) after one year of the construction, it was monitored that land cover ratio was 80-90%, which indirectly shows that vegetation is safely maintained; and (3) at the same time, 5-8 flora species were found in each test grid and more importantly dominant species have been moved from alien species to native herbaceous plants. From the above findings, Geofiber system is recommendable to restore the riparian slopes in terms of stability and natural landscape points. However, a long term monitering is needed considering flora succession process in a given environment as well as suitability tests should be carried out through the comparative investigations in other environments.