• Transactions of Materials Processing
• /
• v.28 no.4
• /
• pp.190-196
• /
• 2019

The capability of accurately predicting the roll force profile across a strip in the bite zone in cold rolling process is vital for the calculation of strip profile. This paper presents a derivation of a precision mathematical model for predicting variations in the roll force across a strip in cold rolling. While the derivation is based on an approximate 3-D theory of rolling, this mathematical model also considers plastic deformation in the pre-deformation region which is located close to the roll entrance before the strip enters the bite zone. Finally, the mathematical model is expressed as a boundary value problem, and it predicts the roll force profile and tension profile in addition to lateral plastic strain profile.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.8
• /
• pp.23-27
• /
• 1999

The measurement of thr high-temperature strains is one of the challenging subjects in mechanical engineering. For the precise measurement, proper high-temperature strain gauge, cement and skilled technique are needed. In this paper, a high-temperature strain measurement is performed for the perfectly flat CRT. As this CRT is structurally very weak, cracking of the panel frequently occurs during the heat cycle in the furnace. From the measured strain variations of the panel with tension shadow mask, the crack behavior can be explained.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.510-515
• /
• 2004

In this study, we investigate the mechanical properties of rail pad material according to pad types. Especially, to study the application and endurance of TEEE material, we conducted experiments such as tension strength test, hardness test, fatigue test and wear test. Test results showed that TEEE material was better application and endurance than other pad material, but there was difficulties for comparing with others because the variations of application according to pad' types were variable.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.3
• /
• pp.20-27
• /
• 1989

This experiment was made to find the peripheral variations of annualring widths, the cell dimensions, microfibril angles and bulk densities within each annual-ring of horizontal-growing young tree of beech(Betul a platyphylla var. japonica) and Oak (Quercus variabilis) from the tension to the opposite side. Also a comparision between the features of the obnormal annual ring for horizontal-growing year and normal annual ring for the straight-growing years was made. The dimension of propotion of the element, the microfibril angles and the bulk density decreased or increased continuously toward opposite side which showed minimum or maximum value. The dimension of elements the microfibril angles and the bulk density decreased or increased continuously towards opposite side which showed minimum or maximum value. The dimension of elements. the microfibril angles and the bulk density in the normal annual rings were similar to those in the lateral woods. whereas were significantly more different in the tension wood than in the opposite wood. The features of typical opposite wood in the hardwoods were influenced by the locations within the inclined stems than effects of the decrease in the annual ring width. The oppostie woods in hardwoods did not conform to the tension wood and lateral wood. The abnormal annual ring included the opposite wood, lateral wood similar to normal wood and tension wood having specialized structure even in the same annual ring.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.200-205
• /
• 2011

Axial and radial distributions of bubble holdup were investigated in a slurry bubble column with pilot plant scale(D=1.0 m). Effects of gas velocity, surface tension of continuous liquid medium and solid fraction in the slurry phase on the axial and radial distributions of bubble holdup were examined. The bubble holdup decreased with increasing radial dimensionless distance from the center of the column, while it increased with increasing dimensionless distance in the axial direction from the distributor, in all the cases studied. The radial non-uniformity of bubble holdup increased with increasing gas velocity but decreasing surface tension of liquid medium, while it was not dependent upon the solid fraction in the slurry phase. The axial non-uniformity of bubble holdup increased with increasing gas velocity, but it does not change considerably with variations of liquid surface tension or solid fraction in the slurry phase . The axial and radial distributions of bubble holdup were well correlated in terms of operating variables within this experimental conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.115-123
• /
• 2018

In a long-span bridge, the cables are important elements that support the load of the bridge. Accordingly, the cable tension is a very important variable in evaluating the health and safety of the bridge. The most popular methods of estimating the cable tensions are the direct method, which directly measures the cable stresses using load cells, hydraulic jacking devices, etc., and the vibration method, which inverses the tensions using the cable shapes and the measured dynamic characteristics. Studies on the use of the electromagnetic (EM) sensor, which detects the magnetic field variations caused by the change in the stress of the steel in the cable, are increasing. In this study, the lift-off test, the EM sensor, and the vibration method (Vision-based System and Accelerometer) were used to measure cable tension, and their results were compared and analyzed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.17-22
• /
• 2009

계절에 따른 토양공극의 수리학적 변화를 파악하기 위해서 설마천 유역의 범륜사 독립사면과 광릉 원두부 소유역의 독립사면을 대상으로 장력침투실험을 실시하였다. 토양수분 확보에 신뢰를 받기위해서 TDR(Time Domain Reflectometry)및 현장에서 토양의 불포화 투수계수 측정이 가능한 장력침투계(Tension infiltrometer)를 이용하였다. 계절에 따른 자료수집을 위해서 2008년 3월 20일 부터 약 6주간격으로 10월 29일까지 5회에서 6회 토양수분 자료 및 토양장력침투 자료를 획득하였다. 획득한 자료를 이용하여 포화 및 불포화 수리전도도, 대공극 유효흐름분율(macropore flow), 대공극 유효부피분율을(effective macroporosity) 나타내었다. 분기별로 자료분석 결과 계절별 특성이 나타남을 알 수 있다. 수리전도도는 3월, 5월, 10월은 유사한 반면 6월과 7월 그리고 9월은 상대적으로 높았다. 이는 여름철에 공극 발달이 활발하다는 것을 의미한다. 선행토양수분은 수리전도도에 영향을 미치는 것으로 나타났다. 대공극의 발달은 삼림과 같은 복잡 경관에서는 강우사상에 따른 토양수분의 공간 분포 및 이송, 유출과정이 물순환에 영향을 미친다. 지형분석을 통한 공극의 흐름특성과 토양수분 유의성에 대하여 논의하였고, 대공극 변화에 밀접한 관계가 있는 식생과 그밖에 계절적으로 발달을 일으키는 요인을 모색 하였다. 본 연구는 계절에 따라 변하는 수리전도도를 기초로 하여 불포화대에서 토양공극의 수리학적 변화와 시공간적으로 침투흐름에 얼마나 영향을 주는가를 보여준다.

• Ocean Systems Engineering
• /
• v.4 no.3
• /
• pp.215-241
• /
• 2014

Steel catenary riser (SCR) is a popular/economical solution for the oil/gas production in deep and ultra-deep water. The behavioral characteristics of SCR have a high correlation with the motion of floating production facility at its survival and operational environments. When large motions of surface floaters occur, such as FPSO in 100-yr storm case, they can cause unacceptable negative tension on SCR near TDZ (touch down zone) and the corresponding elastic deflection can be large due to local dynamic buckling. The generation, propagation, and decay of the elastic wave are also affected by SCR and seabed soil interaction effects. The temporary local dynamic buckling vanishes with the recovery of tension on SCR with the upheaval motion of surface floater. Unlike larger-scale, an-order-of-magnitude longer period global buckling driven by heat and pressure variations in subsea pipelines, the sub-critical local dynamic buckling of SCR is motion-driven and short cycled, which, however, can lead to permanent structural damage when the resulting stress is greatly amplified beyond the elastic limit. The phenomenon is extensively investigated in this paper by using the vessel-mooring-riser coupled dynamic analysis program. It is found that the moment of large downward heave motion at the farthest-horizontal-offset position is the most dangerous for the local dynamic buckling.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.1103-1107
• /
• 2016

The automatic tensioning device of the catenary system constantly maintains the tension of the trolley wire by absorbing the variations due to the elasticity of the line caused by temperature variation. The tension plays an important role in affecting the electric motorcar operation directly. This paper suggests the methodology of the life cycle extension and the maintenance of the automatic tensioning device by means of performance diagnosis of the pulley type automatic tensioning device which has been commonly used for the electric railway system. Through conducting performance diagnosis and comparative test for the wornout pulley type automatic tensioning device by replacing the components such as the bearing and the bearing shaft without replacing all the assembly, the tensioning device is analyzed whether it is properly functioned. Provided that the maintenance regulation is reinforced so as to implement the bearing replacement through periodical precise inspection along with random check-up inspection which is now carried out by the operating organizations, it is ensured that the life cycle extension and the reduction of maintenance cost of the tensioning device could be achieved.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1993.05a
• /
• pp.71-71
• /
• 1993

Diplophonia is produced by the voice of two separate tones and produced through quasi-periodic variations in the vocal cord vibration. Diplophonia is generally regarded as a symptom of laryngeal pathology. The difference in the vibratory frequency between the vocal cords can be seen in a tension imbalance and a difference in the level of the vocal folds under the special condition such as incomplete glottal closure. So authors have experienced 19 cases of patient with diplophonia for the unilateral vocal cord paralysis, intracordal cysts and other mass lesions. And we analysed the diplophonic voice with peak variability and noise level for the quasi-periodic waveforms and spectrograms pre-and postoperatively.