• 한국응용곤충학회지
• /
• 제55권2호
• /
• pp.119-128
• /
• 2016

본 연구는 양배추에서 무테두리진딧물의 온도발육실험, 성충수명, 산자실험을 통해 매개변수를 추정하여, 약충의 온도발육모형, 무시성충의 산자모형 작성에 필요한 기본모형들을 제공하기 위해 실시하였다. 6개의 온도(10, 15, 20, 25, 30, $35{\pm}1^{\circ}C$, 16L:8D)에서 실험한 결과로 저온인 $10^{\circ}C$에서는 성공적으로 발육하지 못했다. 약충 발육기간은 온도가 증가할수록 $30^{\circ}C$까지는 감소하였고 $35^{\circ}C$에서는 다시 증가하였는데, $15^{\circ}C$에서 18.5일, $30^{\circ}C$에서 5.9일 이었다. 약충전체 직선회귀식에서 발육영점온도(DT)는 $7.9^{\circ}C$로 나타났으며, 유효적산온도(DD)는 126.3일이었다. 전기약충(1+2령), 후기약충(3+4령), 전체약충 발육률에 대한 비선형모형(Lactin 2 model)과 발육기간 분포 모형(Weibull model)을 작성하였다. 성충수명은 $15^{\circ}C$에서 비정상적으로 18.2일을 보였고, $20^{\circ}C$에서 24.4일, $30.0^{\circ}C$에서 16.4일의 범위에 있었으며, 성충 생리적 연령계산을 위한 노화율 모형작성에 이용되었다. 총 산자수는 $20^{\circ}C$에서 91.6마리로 최대값을 보였다. 본 연구를 통하여 무테두리진딧물 무시성충 산란모형 작성에 필요한 온도별 총산자수, 연령별 누적산자율, 연령별 생존율 모형 등 3개의 기본모형을 추정하였다.

• 한국세라믹학회지
• /
• 제42권6호
• /
• pp.437-442
• /
• 2005

We fabricated BSCCO-2212 (2212) bulk superconductor by melt casting process, and evaluated the dependence of the critical properties on the temperature and cooling .ate of mold and the pouring methods of melt. It was observed that the critical current (Ic) of 2212 was significantly dependent on the pre-heating temperature of the mold. At the pre-heating temperature of $500^{\circ}C$ followed by air cooling condition, Ic of 48 A at 77 K was obtained which was higher than others processed at different temperatures. In addition, the Ic improved to 132 A when tilt casting method was applied. The improved Ic is probably due to the fact that the tilt casting reduced a turbulent flow of the melt during casting causing less porosity and more homogeneous microsructure. Critical temperature was measured to be 87-89 K after the first heat treatment and it improved to 90-91 K when subsequently heat treated at $650^{\circ}C$ in a nitrogen atmosphere. This improvement was considered to be due to an optimization of the oxygen content in the range of 8.16-8.2.

• 한국공작기계학회논문집
• /
• 제14권2호
• /
• pp.75-82
• /
• 2005

Recently the needs of high reliable substances of high strength and high ductility are gradually increased with the development of aerospace industry. The characteristics of maraging steel has high ductililty, formability, corrosion resistant and high temperature strength and is easy to fabricate, weld and treat with heat, and maintain an invariable size even after heat treatment. e steels are furnished in the solution annealed condition and they achieve full properties through martensitic precipitation aging a relatively simple, low temperature heat treatment. As is true of the heat treating procedures, aging is a time/temperature dependent reaction. Therefore, the objective of this stud)'was consideration of fatigue characteristics according as Nb(niobium) content and time/temperature of heat treatment change. Also the stress analysis, fatigue lift, and stress intensity factor were compared with experiment results and FEA(finite element analysis) result. The maximum ftresses of)( Y, and Z axis direction showed about $2.12\times$10$^{2}$MPa, $4.40\times$10$^{2}$MPa and $1.32\times$10$^{2}$MPa respectively. The fatigue lives showed about $7\%$ lower FEA result than experiment result showing almost invariable error every analyzed cycle. Stress intensity factor of the FEA result was lower about $3.5~ 10\%$ than that of the experiment result showing that the longer fatigue crack ten添 the hi인or error. It considered that the cause for the difference was the modeled crack tip having always the same shape and condition regardless of the crack growth.

• 한국응용곤충학회지
• /
• 제17권4호
• /
• pp.187-191
• /
• 1978

본 실험은 끝동매미충의 온도와 일장조건에 따른 발육도 및 증식능력을 조사하여 실내 대양사육에 적합한 온도와 일장의 범위를 밝히고 나아가 온도와 발육속도와의 함수관계를 유도하는데 필요한 기초자료를 얻고자 수행하여 다음과 같은 결과를 얻었다. 1. 비교적 고온조건인 $33^{\circ}C$와 $35^{\circ}C$에서 약충의 발육이 빠르a 우화율이 높았으나 변온처리($28^{\circ}C$와$319{\circ}C$ 각 12시간)에서는 발육이 지연되었다. 2. 성충의 산란력은 고온$(35^{\circ}C)$)에서 약충기를 거친 성충은 산란수가 매우 적었으나 $29^{\circ}C$에서 우화한 성충은 고온$(33^{\circ}C)$에서 많은 산란을 하였다. 3. $29^{\circ}C$에서의 일장은 약충의 발육 및 우화율에 큰 영향을 미치지 못했다. 4. 약충의 발육속도는 $29^{\circ}C$까지는 온도가 상승함에 따라 직선적으로 빨라졌으나 고온$(33-35^{\circ}C)$에서는 증가율이 둔화되는 결과를 얻었다. 5. 이상의 결과로 적합한 사육조건은 약충기에 $27-29^{\circ}C$, 성충기에 $33^{\circ}C$인 것으로 생각된다.

• 한국발생생물학회지:발생과생식
• /
• 제21권1호
• /
• pp.101-110
• /
• 2017

On June 14, 2008 (the first experiment) and July 24, 2008 (the second experiment), the shores of the Boseong River and the sandy beaches, Seokgok-myun, Moksadong-myun, Gokseong-gun in Jeollanam Province were investigated and a total of 29 soft-shelled turtle (Tryonyx sinensis) eggs in the natural spawning nest eggs were collected (13 eggs were collected in the first experiment and 16 eggs in the second experiment). The temperatures in the natural spawning nests were $25.9-36.9{\pm}0.5^{\circ}C$, the depth of the eggs was $5.2-7.5{\pm}0.5cm$ as the distance of the average $6.4{\pm}0.5cm$. 29 eggs were scattered at least 0.2 cm interval. Artificial incubation of 29 eggs was conducted in artificial nest boxes in thermo-plastic composition of the incubator, and then incubated at $26.5-35.5{\pm}0.5^{\circ}C$, and an average constant temperature was $31.2-32.1{\pm}1.0^{\circ}C$. The incubation days ranged from 53 to 55. In case of most turtles, incubation at $31^{\circ}C$ (higher temperatures) generally produces all or mostly females, while incubation at $25^{\circ}C$(cooler temperatures) produces all or mostly males. Exceptionally, in case of genus Trionyx, the sex ratio of female : male of T. sinensis of a freshwater soft-shelled turtle was approximately 1:1, which differs from other genera of turtles and makes T. sinensis Strauch only turtles presently known to lack temperature-dependent sex determination.

• 한국어류학회지
• /
• 제13권1호
• /
• pp.85-88
• /
• 2001

메기 Silurus asotus에서 염색체조작을 효과적으로 하기 위하여, 여러 온도 조건에서의 난할율과 제2, 제3 난할 시간의 평균화에 의한 체세포분열 간격지수 (${\tau}_o$)를 조사하였다. 빠른 난 발생과 비동시적 발생은 고온에서 더욱 뚜렷하게 나타났다. 메기의 체세포분열 간격지수는 $22^{\circ}C$에서 $21.5{\pm}1.4$분, $24^{\circ}C$에서 $18.5{\pm}1.2$분 그리고 $26^{\circ}C$에서 $14.0{\pm}2.1$분이었다. 3가지 수온조건과 ${\tau}_o$ 간에는 Y=-1.85X+21.9 ($R^2=0.9868$, Y는 ${\tau}_o$ 그리고 X는 수온)의 직선회귀가 성립되었다.

• Environmental Engineering Research
• /
• 제11권4호
• /
• pp.217-231
• /
• 2006

The gas-phase formation of polychlorinated naphthalenes (PCNs) and dibenzofurans (PCDFs) was experimentally investigated by slow combustion of the three chlorophenols (CPs): 2-chlorophenol (2-CP), 3-chlorophenol (3-CP) and 4-chlorophenol (4-CP), in a laminar flow reactor over the range of 550 to $750^{\circ}C$ under oxidative condition. Contrary to the a priori hypothesis, different distributions of PCN isomers were produced from each CP. To explain the distributions of polychlorinated dibenzofuran (PCDF) and PCN congeners, a pathway is proposed that builds on published mechanisms of PCDF formation from chlorinated phenols and naphthalene formation from dihydrofulvalene. This pathway involves phenoxy radical coupling at unsubstituted ortho-carbon sites followed by CO elimination to produce dichloro-9, 10-dihydrofulvalene intermediates. Naphthalene products are formed by loss of H and/or Cl atoms and rearrangement. The degree of chlorination of naphthalene and dibenzofuran products decreased as temperature increased, and, on average, the naphthalene congeners were less chlorinated than the dibenzofuran congeners. PCDF isomers were found to be weakly dependent to temperature, suggesting that phenoxy radical coupling is a low activation energy process. Different PCN isomers, on the other hand, are formed by alternative fusion routes from the same phenoxy radical coupling intermediate. PCN isomer distributions were found to be more temperature sensitive, with selectivity to particular isomers decreasing with increasing temperature.

• 한국의류산업학회지
• /
• 제25권4호
• /
• pp.497-507
• /
• 2023

This study measured the effect 3D printing products comprised of different materials and shapes on heat transfer in clothing to derive fundamental data on thermal comfort among clothing comfort. The variables were three types of material (EVA foam, TPU-10%, TPU-10%+EVA), two types of shape (without holes, with holes), and two types of covers(without cover, with cover). All samples (12 types) prepared by combining these variables were placed on the hot plate set at 36℃, and the surface temperature was measured at three points for 10 minutes. The surface temperature change was dependent on the material, shape, and cover of the sample. The sample printed with TPU exhibited higher temperature transfer compared to the EVA foam sample after 10 mins. In addition, the temperature transfer was better when there were holes, and rate decreased when the sample was covered with fabric. We confirmed that material selection of the pad and thermal conductivity of the cover are extremely important in solving thermal stress to the human body caused by functional clothing with protectors. Additionally, as the protector, it is recommended to design the outer shell with a passage, such as a hole, to allow the rapid transfer of heat to the external environment.

• 한국전자파학회논문지
• /
• 제19권6호
• /
• pp.698-705
• /
• 2008

전자파가 대기를 통과할 때 대기를 형성하고 있는 다양한 요인들에 의해 그 특성이 변동하게 된다. 전파 특성에 영향을 미치는 대기의 주요 요인으로는 수증기, 안개, 산소와 같은 대기 입자, 강우, 강설 및 그 외 여러 종류의 에어로졸을 들 수 있으며, 이러한 것들은 지형 및 지역적 특성에 따라 다르게 분포한다. 따라서 대기 환경에서의 전파 특성을 예측하기 위해서는 주어진 환경에 대한 기온, 습도, 기압, 풍속, 에어로졸 및 강우율 등의 통계적 분석이 중요하다. 본 논문에서는 국내 대기 환경에 대한 통계적 분석을 수행하였으며, 이를 바탕으로 국내 대기 환경에서의 전파 특성을 분석하였다.

• 한국축산시설환경학회지
• /
• 제20권4호
• /
• pp.147-154
• /
• 2014

Heat stress is a significant burden to animal production in most areas of the world. Improving our knowledge of physiological and metabolic mechanisms of acclimation may contribute to the development of procedures that may help to maintain health and production efficiency under hot temperature. The effect of Ulmus pumila (UP) extract in inducing Heat Shock Proteins (HSPs) expression in heat-stressed RAW264.7 macrophage cells was investigated. Cell viability assay showed a dose dependent increase in cells after treatment with UP for 24 hours. RT-PCR and western blot analysis showed that increasing concentrations of UP induce the expression of Heat Shock Factor 1 (HSF1) and dose dependently upregulated the expression of Heat shock protein 70 (Hsp70) and Hsp90. LPS-induced nitric oxide was dose-dependently reduced while phagocytic activity greatly recovered with UP treatment. These data demonstrated that UP can be a potential candidate in the development of cytoprotective agent against heat stress.