• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.7-8
• /
• 2010

비대칭 H형강이 콘크리트에 매립되어 화재에 노출되는 일반 합성 보에 비하여 내화성능이 높은 슬림플로어 공법에 대한 화재거동특성을 분석하고, 이를 기반으로 내화성능을 향상시킬 수 있는 최적 단면형상조건을 도출하고자 연구를 수행하였다. 단면형상은 휨 성능을 증진시킬 수 있는 웹 보강과 화재에 직접 노출되는 하부플렌지의 보강 방안에 대하여 화재실험을 진행하였으며, 무 보강조건과 형상변화시에 발생하는 합성플로어의 처짐을 비교 분석하여 최적 단면형상설계 조건을 도출하고자 하였다. 실험결과 웹보강방안에 비해 하부플렌지 보강시 내화성능 향상효율이 더 높은 것으로 나타났으며, 이는 화재에 직접적으로 노출되는 하부플렌지 부분에 보강을 하는 것이 급격한 온도상승으로 인한 강도저하로 인해 발생하는 변형을 보다 효율적으로 제어하기 때문으로 판단된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2850-2855
• /
• 2008

Very High Temperature Reactor (VHTR) has been selected as a high energy heat source for a nuclear hydrogen generation. The VHTR heat is transferred to a thermo-chemical hydrogen production process through an intermediate loop. Both Process Heat Exchanger and sulfuric acid evaporator provide the coupled components between the VHTR intermediate loop and hydrogen production module. A small scaled Compact Nuclear Hydrogen Coupled Components test loop is developed to simulate the VHTR intermediate loop and hydrogen production module. Main objective of the loop is to screening the candidates of NHDD (Nuclear Hydrogen Development and Demonstration) coupled components. The operating condition of the gas loop is a temperature up to $950^{\circ}C$ and a pressure up to 6.0MPa. The thermal and fluid dynamic design of the loop is dependent on the structures that enclose the gas flow, especially primary side that has fast gas velocity. We designed and constructed a small scale sulfuric acid experimental system which can simulate a part of the hydrogen production module also.

• 한국수산과학회지
• /
• 제54권3호
• /
• pp.271-279
• /
• 2021

Ultrasound-assisted extraction (UAE) conditions, including extraction time, extraction temperature, and ethanol concentration, were optimized to increase the total flavonoid content (TFC), tyrosinase inhibitory activity (TIA), and collagenase inhibitory activity (CIA) of Spirulina platensis through central composite design (CCD). For the optimization of the three dependent variables, a quadratic regression model was derived from 17 experimental sets for the simultaneous maximization of TFC, TIA, and CIA. The predicted optimal UAE conditions were 44.0 min of extraction time, 82.8℃ of extraction temperature, and 96.0% of ethanol concentration. Under these conditions, 0.93 mg QE/g DM of TFC, 81.9% of CIA, and 92.1% of TIA were predicted. The CCD-based UAE optimization enabled an increase in TFC, CIA, and TIA, thereby confirming that the S. platensis extract can be used in the development of a cosmetic material with skin whitening and anti-wrinkle effects.

• 한국응용곤충학회지
• /
• 제56권4호
• /
• pp.387-394
• /
• 2017

벼에 반점미를 유발하는 흑다리긴노린재 [Paromius exiguus (Distant)]의 온도에 따른 산란 특성을 $17.5{\sim}35^{\circ}C$ 8개 항온조건 광주기 14L:10D에서 조사하고 산란모델 구축을 위한 단위 함수 개발 및 생명표 분석을 수행하였다. 성충 수명은 $17.5^{\circ}C$에서 123.8일로 가장 길었고, $32.5^{\circ}C$에서 23.6일로 가장 짧았으며 온도가 올라감에 따라 수명도 짧아졌다. 암컷 한 마리당 총산란수는 $30^{\circ}C$에서 585.2개로 가장 많았으며, $17.5^{\circ}C$에서 21.5개로 가장 적었다. 온도에 기반한 산란 모델 개발을 위해 성충노화율, 총산란수, 성충생존율 및 누적산란율 단위모델을 추정하였다. 총 산란수($r^2=0.83{\sim}0.85$)를 제외한 3개의 단위모델 모두에서 높은 수준의 모델 적합성을 보였다($r^2=0.92{\sim}0.98$). 온도에 따른 흑다리긴노린재 생명표 매개변수들을 추정하였다. 순증가율($R_0$)은 $30^{\circ}C$에서 118.21로 가장 높았다. 평균 세대기간(T)은 $32.5^{\circ}C$에서 32.99일로 가장 짧았으며, 개체군 배수기간(Dt)은 $30^{\circ}C$에서 5.69일로 가장 짧았다. 내적자연증가율($r_m$)과 기간증가율(${\lambda}$)은 $30^{\circ}C$에서 가장 커 각각 0.122, 1.129였다.

• 한국대기환경학회지
• /
• 제16권6호
• /
• pp.653-663
• /
• 2000

A lot of hazardous wastes are discharged as by-products of working process by industrial development. Hazardous wastes is physical characteristics of difficult destruction at hight temperature. Numerical simulation and combustion experiment performed of dump incinerator for hazardous waste incineration. For the numerical simulation, the SIMPLEST algorithm was used to ensure rapid converge A K-$\varepsilon$ model was incorporate for the enclosure of turbulence flow. Combustion model was used by ESCRS (extended simple chemically reacting system) model available of CHEMKIN thermodynamic data for the source term of species conservation equation or energy equation. Radiation model is used by six flux model. A parametric screening studies was carried out through numerical simulation and experiment. Residence time and concentration in the incinerator was strongly dependent on the parameters of mixture velocity, mixture equilibrium ratio, surrogate velocity and surrogate equilibrium ratio.

• 한국양식학회지
• /
• 제16권1호
• /
• pp.37-43
• /
• 2003

The present study reports morphology and developmental pattern off siliquosa cultured in a laboratory condition. The zygote was spherical with a diameter of 85 ${\mu}{\textrm}{m}$. During development the polarized zygote divided horizontally and the lower daughter cell divided horizontally into 2 cells. The upper cell was divided repeatedly in horizontal and vertical directions to form a cylinder-like structure, which subsequently developed into secondary and tertiary dichotomous branches. Optimum temperature for zygote release and fertilization was 25C. Injury inflicted by slicing was cured by epidermal differentiation, and adventitious branches; the branches emerging from the pith cells, however, developed no rhizoid. Adventitious branch formation rate was over 88% in all plates supplemented with 0.5 mg/L IAA and peaked at 98% under 0.5 mg/L IAA plus 0.5-5.0 mg/L NAA treatment. NAA stimulated the differentiation of adventitious branches at a wide range of concentrations, while IAA, 2,4-D and kinetin exhibited dose-dependent stimulation.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제29권1호
• /
• pp.93-119
• /
• 2014

Tropical tasar silkworm, Antheraea mylitta (Lepidoptera: Saturniidae) is a polyphagous silk producing forest silkworm of commercial importance in India. Forest dependent people rear its larvae on different forestry host plants twice or thrice in a year for small household income. Larvae of A. mylitta feeds on many forest tree species, but always show a great degree of selectivity as a function of its behavioural responses to physical structure and chemical features of the host plants. Cocoon crop of A. mylitta is influenced by heterogeneity of tasar food plants and climatic conditions of the habitat. The role of host plants, temperature, humidity, rainfall, photoperiod and climatic variables on the growth and development of insects have clearly been demonstrated. This article entails an in-depth analysis on ecological and nutritional aspects of A. mylitta, which may provide selective information to researcher and forest managers, who are particularly associated with livelihood improvement of the poor people in forested area through location specific forest insect industry.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.70-74
• /
• 2003

We fabricated cube textured Ni substrate for YBCO coated conductor and evaluated the effects of processing parameters on microstructural evolution and texture formation. Ni-rods as an initial specimen were prepared by two different methods, i.e., powder metallurgy(PM) and plasma arc melting(PAM). Subsequently, the rods were cold rolled to 100 $\mu\textrm{m}$ thick substrate and annealed at temperatures of $700∼1200^{\circ}C$. The texture of the substrate was characterized by pole-figure. It was observed that the texture of substrate made by P/M did not significantly varied with annealing temperature of 600∼$l100^{\circ}C$ and the full-width at half-maximums (FWHM) of both in-plane and out-of-plane were 9$^{\circ}$∼$10^{\circ}$. On the other hand, the texture of substrate made by PAM was more dependent on the annealing temperature and the corresponding values were $9^{\circ}$ ∼$13^{\circ}$ at the temperature range. In addition, recrystallization twin texture, (221)＜221＞, was formed as the temperature increased further. OM profiles showed that the grain size of substrate made by P/M was smaller than that made by PAM and this difference was correlated to the microstructure of initial specimens.

• 한국토양비료학회지
• /
• 제48권4호
• /
• pp.305-311
• /
• 2015

Both low and high temperatures affect plant growth and development at whole plant level, tissue and even cell level through a variety of metabolic changes. Temperature stress is one of frequently occurring problems in greenhouse crops in summer and winter seasons due to the wide-spread year-round cultivation. In the present study, we investigated the extent of the inhibition of growth, macro-element uptake and soluble carbohydrate production, and the effect of extra-supply of minerals as a means of the recovery from temperature damage. Tomato plants were grown five different growth temperatures (15/8, 20/13, 28/21, 33/23 and $36/26^{\circ}C$), and extra-supply of minerals was composed of 1.5- and 2.0-fold stronger than the standard nutrition (1/2 strength of Hoagland's solution). Temperature stress significantly adversely affected tomato growth and mineral uptake, whereas soluble carbohydrate accumulation represented temperature-dependent response, more accumulation at low temperature and more consumption at high temperature. The soluble sugars in leaves and stems were mostly declined with the supply of extra-minerals at low and optimal temperatures, whereas remained unchanged at high temperature. The starch levels also remained unchanged or slightly decreased.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.358-366
• /
• 2006

Thermotropic liquid crystal polymer (TLCP)-reinforced poly(butylene terephthalate) (PBT) composites were prepared by melt processing. The improvement in the mechanical properties and the processability of the PBT/TLCP composites was attributed to the reinforcing effect by TLCP phase and its well distribution in the PBT matrix. X-ray diffraction results demonstrated that a slow cooling process leads to the thicker lamellar structures and the formation of more regular crystallites in the composites. The incorporation of TLCP improves not only the tensile strength and flexural modulus but also the heat distortion temperature (HDT) of the PBT/TLCP composites. The HDT values of the composites were dependent on TLCP content. The improvement in the HDT values of the PBT/TLCP composites may be explained in terms with the increased flexural modulus, the development of more regular crystalline structures, and the enhancement of the ability of the composites to sustain the storage modulus by TLCP phase. In addition, the simple additivity rule makes it possible to predict the HDT values of the PBT/TLCP composites.