• Journal of the Korean Wood Science and Technology
• /
• 제22권3호
• /
• pp.32-38
• /
• 1994

The methods in wood processing are so limited at present that a scope of its utilization is restricted. This often makes wood itself less valuable as a material comparing with other materials, that is, plastics, metals, and glass. Such differences are due to a lack of plasticity in wood, i.e. it cannot be melted, dissolved, or softened sufficiently for molding. However, once plastic properties are added to wood, it becomes more useful material. This further broadens the method in wood processing to a variety of fields. In this way, wooden material which is limited in use can be modified into a high quality product with additional value. Furthermore, utilization of wastes from wood, for example, would be made viable. In this study, thermoplasticization was carried out by benzylation of wood(sawdust). Various factors those affect the reaction were tested to produce benzylated wood with different degrees of substitution. Reaction temperature and time were the quite important factors. Optimum reaction temperature was 110$^{\circ}C$, and weight percent gains(WPG) of final products increased gradually with the increase of reaction time. The pretreatment (or preswelling) of wood with alkaline solution had a critical effect on benzylation. and the concentration of alkaline solution should be above 30% to obtain high weight percent gain. The thermal flow temperature of the benzylated wood decreased with the increase in weight percent gain, that of 80% weight percent gain is about 200$^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권10호
• /
• pp.1502-1506
• /
• 2002

This experiment was conducted to evaluate the effects of the broiler's genotype ($G_t$) and ambient temperature ($T_a$) on performance and core body temperature ($T_core$) of broiler chicks. A factorial arrangement of two $G_t$ (Hubbard and ISA J57 chicks) and two $T_a$ (moderate, $23{\pm}0.5^{\circ}C$ and hot, $33{\pm}0.5^{\circ}C$) were used in this study. Performance data (body weight gain, feed intake and feed:gain ratio) were determined weekly for six weeks. Chicks' $T_core$ was measured using a biotelemetric system between Weeks five and six. Results showed that body weight gain and feed intake were significantly high, and feed:gain ratio was significantly low for Hubbard chicks compared to those of ISA J57 chicks. High $T_a$ significantly reduced weight gain and feed intake. Furthermore, the reduction in body weight gain and feed intake under the hot $T_a$ was more pronounced for Hubbard chicks than those of the ISA J57 chicks resulting in significant $G_t$ by $T_a$ interaction. Chicks grown under moderate $T_a$ had significantly lower $T_core$ than those grown under hot $T_a$. The $T_core$ of the Hubbard chicks was significantly lower than that of the ISA J57 at the moderate $T_a$ while under the hot $T_a$, the magnitude of the change in $T_core$ was more pronounced in Hubbard chicks than that of ISA J57; this resulted in a significant $G_t$ by $T_a$ interaction. The results of this study indicate that chicks with higher potential for growth under thermo-neutral temperature are more susceptible to heat stress than chicks with lower potential for growth. This maybe due, at least in part, to their lower body $T_core$ under moderate temperature and to the lesser ability of these fast growing chicks to regulate their $T_core$ when exposed to heat stress, as was clearly shown on these birds' performance.

• 대한기계학회논문집A
• /
• 제25권5호
• /
• pp.816-822
• /
• 2001

The thermoforming process is widely used in the plastics industry to produce articles for the packaging, automotive, domestic construction and leisure industries. The microcellular foaming process appeared at M.I.T. in 1980s to save a quantity of polymer materials and increase their mechanical properties. The glass transition temperature of polymer materials is one of many important process variables in appling the microcellular foaming process to the conventional thermoforming process. The goal of this research is to evaluate the relation between gas absorption and glass transition temperature in batch process using microcellular foaming process. The weight gain ratio of polymer materials has a conception of gas absorption. Polymers such as acrylonitrile-butadiene-styrene(ABS), polystyrene(PS) have been used in this experiment. According to conventional Chows model and Cha-Yoon model, it was estimated with real experimental result to predict a change of glass transition temperature as a function of the weight gain ratio of polymer materials in batch process to gain microcellular foamed plastic products.

• Fisheries and Aquatic Sciences
• /
• 제19권5호
• /
• pp.23.1-23.7
• /
• 2016

The effects of daily feeding frequency (Exp I), water temperature (Exp II), and stocking density (Exp III) on the growth of river puffer, Takifugu obscurus, juvenile fish of 10 and 40 g in body weight were examined to develop effective techniques to produce river puffer in a non-exchange water system. In Exp I, fish were fed commercial floating feed with 45 % protein one to five times per day to apparent satiation each by hand daily for 8 weeks at $25^{\circ}C$. In both the 10- and 40-g size groups, the final body weight, daily feed consumption, and weight gain of fish fed one meal per day were significantly lower than those of fish fed five meals per day (P < 0.05). However, there were no significant differences in the final body weight, daily feed consumption, and weight gain among fish fed two, three, and five meals per day. Feed efficiency showed decreasing tendency with increasing size of fish. In Exp II, fish of 10 and 40 g in initial body weight were reared with the commercial feed at $15-30^{\circ}C$ for 8 weeks. The weight gain of fish increased with raising water temperature up to $25^{\circ}C$ and decreased drastically at $30^{\circ}C$ for both sizes. The Q10 of specific growth rate was decreased with raising water temperature from 5.04 (temperature interval, $15-20^{\circ}C$) to 0.66 ($25-30^{\circ}C$) for the 10-g fish and from 4.98 to 0.31 for the 40-g fish. In Exp III, the effect of stocking density on growth was examined with fish of 10 and 40 g in initial body weight. The final body weight for initial stocking densities of 4, 8, and $12kg/m^3$ was significantly higher than that of $20kg/m^3$ for the 10-g fish, and the final stocking density reached 10.1, 19.2, 28.7, and $39.9kg/m^3$, respectively. For the 40-g fish, the final body weight for initial stocking densities of 3 and $6kg/m^3$ was significantly higher than that of 9 and $15kg/m^3$ and the final stocking density reached 7.38, 13.5, 17.1, and $27.5kg/m^3$, respectively (P < 0.05). In both groups, weight gain tended to decrease with increasing stocking density; however, survival showed no significant difference.

• 한국가스학회지
• /
• 제19권5호
• /
• pp.75-80
• /
• 2015

나노 및 마이크로 크기의 알루미늄(Al) 분진은 매우 높은 연소열을 가지고 있어서 로켓 추진체와 폭발물 등을 제조하는 원료로 많이 사용되고 있다. 본 연구에서는 서로 다른 크기의 입자경 (70 nm, 100 nm, $6{\mu}m$, $15{\mu}m$)을 가진 알루미늄 분진을 사용하여 열분해 위험성을 실험적으로 검토하였다. 이를 위해 열중량분석장치(TGA)를 사용하여 승온속도의 변화에 따른 열분해특성을 조사하고 입경이 다른 나노 및 마이크로 크기의 Al에서의 중량개시온도(Temperature of weight gain)로부터 발화온도를 추정하였다. 승온속도가 동일한 조건에서 Al분진의 중량개시온도는 입경이 증가할수록 또한 공기중 승온속도가 증가할수록 증가하는 경향을 나타냈다. 이러한 실험결과로부터 Al분진의 열분해 위험성은 분진 입자경의 증가와 함께 감소할 것으로 추정되었다.

• 한국패류학회지
• /
• 제25권2호
• /
• pp.121-126
• /
• 2009

This study was performed to determine the effect of temperature condition on growth of juvenile abalone Haliotis discus hannai with the different feeds. Two types of feed (dry sea tangle and experimental diet) at water temperatures of 20 and $23^{\circ}C$, and 23 and $26^{\circ}C$ were applied to experimental abalone twice. Forty-five juvenile abalone averaging 10.1 g in the first feeding trial and 11.5 g in the second feeding trial were randomly stocked into 6 of 50 L plastic rectangular containers each. Fishmeal, soybean meal and shrimp head meal was used as the primary protein source in the experimental diet. And dextrin and wheat flour, and soybean oil were used as the primary carbohydrate and lipid sources in the experimental diet, respectively. The dry sea tangle and experimental diet were fed to abalone once a day at the ratio of 1.5-2.0% total biomass of abalone with a little leftover in each experimental condition. Weight gain of abalone was significantly affected by feed type, but not by water temperature in the first feeding trial. Regardless of water temperature, weight gain of abalone fed the experimental diet was significantly higher than that of abalone fed the dry sea tangle. However, weight gain of abalone was significantly affected by water temperature, but not by feed type in the second feeding trial. Weight gain was highest in abalone fed the experimental diet at $23^{\circ}C$, followed by abalone fed the dry sea tangle at $23^{\circ}C$, abalone fed the experimental diet and dry sea tangle at $26^{\circ}C$, which was lowest. Moisture and crude protein content of the edible portion of abalone was significantly affected by feed type, but not by water temperature in the second feeding trial. However, ash content of the edible portion of abalone was significantly affected by water temperature, but not by feed type. In considering these results, it can be concluded that the well formulated feed was superior to the dry sea tangle for growth of juvenile abalone, and water temperature conditions of 20 and $23^{\circ}C$ seemed to be better than $26^{\circ}C$ to improve weight gain of abalone.

• 한국표면공학회지
• /
• 제35권6호
• /
• pp.363-370
• /
• 2002

Empirical equations for the oxide thickness and the weight gain of Zircaloy-4 cladding during the oxidation in high temperature, high pressure steam have been developed. Firstly, the empirical equations for oxide thickness in 1 atm steam in 700~100$0^{\circ}C$ were made, then, the enhancement factor for the steam pressure effects on Zircaloy-4 cladding oxidation in high temperature steam was added. Based on the analysis of the weight fraction of dissolved oxygen in metal layer, empirical equations for the weight gain of Zircaloy-4 in high pressure, high temperature steam were developed. We compare the developed empirical equations with the Baker-Just correlation. The Baker-Just correlation can give a non-conservative estimation of oxidation of Zircaloy-4, depending on the steam pressure. These developed empirical equations can be used for the correct estimation of oxidation of Zircaloy-4 during accident analysis.

• 동력기계공학회지
• /
• 제11권2호
• /
• pp.44-50
• /
• 2007

The oxidation behavior of commercial pure titanium is investigated in the temperature range of $727^{\circ}C{\sim}950^{\circ}C$ in mixed gases. The weight change is measured by TGA during oxidation in mixed gases. The oxidation behavior indicated by weight gain or the growth of oxide layer is based on the linear rate law at high temperatures. The structure of the oxide scale formed during oxidation is analysed by optical microscopy, electron probe microanalyzer, scanning electron microscope and x-ray diffraction. Oxide scales have a $TiO_2$ structure, and are constituted with multi-layered or two layered porous external one and a dense internal one. Ti-O solid solution region is formed at the interface of metal and scale layer. The formation of oxide scale is influenced by the oxidation temperature, time, crystal structure and the condition of atmosphere.

• 한국환경과학회지
• /
• 제31권2호
• /
• pp.215-218
• /
• 2022

This study investigated the effect of adding poultry litter additive containing probiotics and amino acids to the litter on weight gain in ducks and ammonia content in poultry litter. Nine hundred 1-day-old ducks (Pekin) were randomly distributed into three groups (300 birds per treatment divided into three replicates) using a randomized block design. Treatments were top-dressed on the litter surface at rates of 2 kg poultry litter additives (T1) and 2 kg macsumsuk (T2) per m², and untreated poultry litter was used as the control. Overall, a significant difference (p<0.05) in weight gains was observed at 3 and 4 weeks, but not at 5 and 6 weeks. After 4 weeks, when compared to other treatments, the addition of poultry litter additive tended to increase the average body weight gain (90-130 g). The ammonia content was affected by all treatments (p<0.05) over time except at 3 weeks, however, compared to other treatments, the poultry litter additive decreased the ammonia content. In particular, the rate of ammonia reduction by the poultry litter additives over time was approximately 20.2%-49.2%. Regarding temperature, a significant difference was observed in all treatment groups (p<0.05), except at 3 weeks. In conclusion, considering poultry litter additives and temperature, the increase in duck weight gain was associated with a decrease in ammonia content in the poultry litter.

• 한국세라믹학회지
• /
• 제31권7호
• /
• pp.777-783
• /
• 1994

Oxidation behavior of hot-pressed silicon nitride ceramics with various sintering additives has been investigated. The weight gain of each specimens has shown in the range of 0.11 mg/$\textrm{cm}^2$ ~3.4 mg/$\textrm{cm}^2$ at 140$0^{\circ}C$ for 192 h and eleven compositions have shown good oxidation resistance with the weight gain below 0.5 mg/$\textrm{cm}^2$. The oxidation rate has been shown to obey the parabolic rate law and the oxidized surface has consisted of $\alpha$-cristobalite and M2Si2O7 or MSiO3 (M=rare earth or transition metals) phase. The oxidation rate of each specimens has related to the eutectic temperature between additive oxide and SiO2, and ionic radius of additive oxides, respectively. From the above results, it could be concluded that the oxidation behavior of hot pressed silicon nitride is dominated by the high temperature properties of grain boundary glassy phase and the high temperature properties of grain boundary glassy phase are affected by the ionic radius of additive oxides.