• Journal of Korean Society on Water Environment
• /
• v.37 no.6
• /
• pp.531-538
• /
• 2021

In this study, the TOC in six estuarine reservoirs in the West Sea (Ganwol, Namyang, Daeho, Bunam, Sapkyo, and Asan) was estimated using optically-active water quality factors by the water environment monitoring network. First, specification data and land use maps of each estuarine reservoir were collected. Subsequently, water quality data from 2013 to 2020 were collected. The data comprised of 11 parameters: pH, dissolved oxygen, BOD, COD, suspended solids (SS), total nitrogen, total phosphorus, water temperature, electrical conductivity, total coliforms, and chlorophyll-a (Chl-a). The TOC in the estuarine reservoirs was 4.9~7.0 mg/L, with the highest TOC of 7.0 mg/L observed at the Namyang reservoir, which has a low shape coefficient and high drainage density. The correlation of TOC with water quality factors was also analyzed, and the correlation coefficients of Chl-a and SS were 0.28 and 0.19, respectively, while the correlation coefficients of these factors in the Namyang reservoir were 0.42 and 0.27, respectively. To improve the estimation of TOC using Chl-a and SS, the TOC was averaged in 5 mg/L units, and Chl-a and SS were averaged. Correlation analysis was then performed and the R² of Chl-a-TOC was 0.73. The R² of SS-TOC was 0.73 with a non-linear relationship. TOC had a significant non-linear relationship with Chl-a and SS. However, the relationship should be assessed in terms of the spatial and temporal variations to construct a reliable remote sensing system.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.249-256
• /
• 2022

The prosthetic leg is a device that performs walking instead of a amputated lower limb, and require a change in locomotion mode by providing the user's intention to respond to a discontinuous locomotion environment. Research has been conducted to detect the users' intentions through biomechanical features inside the socket that directly contacts the cut site in demand for natural locomotion mode changes without external control equipment. However, there is still a need for a sensor system that is suitable for the internal environment of the main body and socket of the cut site. Accordingly, this paper proposed a film-type sensor system that is suitable for the main body characteristics of the cut site, is not affected by the temperature and humidity conditions inside the socket, and is easy to manufacture in various sizes. The proposed sensor is manufactured base on Velostat film and takes into account the pressure measurement characteristics that vary with size. Through the experiment, the change in the internal pressure of the socket due to the intentional posture performance of the wearer was measured, and the possibility of detecting the intention to change the locomotion mode was confirmed.

• Journal of Astronomy and Space Sciences
• /
• v.39 no.3
• /
• pp.117-126
• /
• 2022

The Ionospheric Anomaly Monitoring by Magnetometer And Plasma-probe (IAMMAP) is one of the scientific instruments for the Compact Advanced Satellite 500-3 (CAS 500-3) which is planned to be launched by Korean Space Launch Vehicle in 2024. The main scientific objective of IAMMAP is to understand the complicated correlation between the equatorial electro-jet (EEJ) and the equatorial ionization anomaly (EIA) which play important roles in the dynamics of the ionospheric plasma in the dayside equator region. IAMMAP consists of an impedance probe (IP) for precise plasma measurement and magnetometers for EEJ current estimation. The designated sun-synchronous orbit along the quasi-meridional plane makes the instrument suitable for studying the EIA and EEJ. The newly-devised IP is expected to obtain the electron density of the ionosphere with unprecedented precision by measuring the upper-hybrid frequency (f_UHR) of the ionospheric plasma, which is not affected by the satellite geometry, the spacecraft potential, or contamination unlike conventional Langmuir probes. A set of temperature-tolerant precision fluxgate magnetometers, called Adaptive In-phase MAGnetometer, is employed also for studying the complicated current system in the ionosphere and magnetosphere, which is particularly related with the EEJ caused by the potential difference along the zonal direction.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.50-61
• /
• 2022

Snow, rain, fog, and particulate matter interfere with the vehicle driver's vision, which causes a non-secure safety distance and an increase in speed deviation, causing repetitive large-scale traffic accidents. This study developed a road environment sensor capable of measuring 11 types of fog, snow, rain, temperature, humidity, direction of wind, speed of wind, Insolation, atmospheric pressure, fine particles, rainfall, etc. and compared the visibility measured by the infrared signal value of the development sensor. The relationship between the existing fog visibility sensor and the development sensor measurement was derived from data measured at a visibility of 500m or less that directly affects road safety.

• Journal of Korean Society on Water Environment
• /
• v.39 no.4
• /
• pp.302-315
• /
• 2023

Distribution characteristics and altitudinal gradient of four species (E. strigata, E. separigata, E. orientalis-sachalinensis group) of the mayfly genus Ephemera (Order Ephemeroptera) were analyzed with probability distribution models (exponential, normal, lognormal, logistic, Weibull, gamma, beta, Gumbel). Data was collected from 23,846 sampling units of 6,787 sites in Korea from 2010 to 2021. The beta distribution model showed the best fit for positively skewed E. orientalis-sachalinensis and little-skewed E. strigata along with altitudinal gradient. The reversed lognormal distribution model showed the best-fit for negatively skewed E. separigata. E. orientalis-sachalinensis distributed at the range of altitude 1~700 m (mean 251 m, median 226 m, mode 124 m, and standard deviation 161 m), E. strigata distributed at the range of altitude 5~871 m (mean 474 m, median 478 m, mode 492 m, and standard deviation 200 m), E. separigata distributed at the range of altitude 7~846 m (mean 620 m, median 659 m, mode 760 m, and standard deviation 181 m). Altitudinal habitat suitability ranges were estimated to be 42~257 m for E. orientalis-sachalinensis, 335~644 m for E. strigata, and 641~824 m for E. separigata. Based on the altitudinal spectrum of suitability and altitude-related temperature analysis results, E. orientalis-sachalinensis was estimated to be thermophilic, E. strigata to be mesophilic, and E. separigata to be thermophobic. This is the first national-scale evaluation of the altitudinal distribution of Ephemera in Korea. These results will be used in a further research study on altitudinal shift of the species of Ephemera under climate change.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.294-294
• /
• 2022

In 2013, the Asian Development Bank classified the Philippines among the countries facing high food security risks. Evidence has suggested that climate change has affected agricultural productivity, and the effect of extreme climatic events notably drought has worsened each year. This had resulted in serious hydrological repercussions by limiting the timely water availability for the agriculture sector. Laguna is the 3^rd most populated province in the country, and it serves as one of the food baskets that feed the region and nearby provinces. In addition to climate change, population growth, rapid industrialization, and urban encroachment are also straining the delicate balance between water demand and supply. Studies have projected that the province will experience less rainfall and an increase in temperature, which could simultaneously affect water availability and crop yield. Hence, understanding the composite threat of climate change for crop yield and water consumption is imperative to devise mitigation plans and judicious use of water resources. The water footprint concept elaborates the water used per unit of crop yield production and it can approximate the dual impacts of climate change on water and agricultural production. In this study, the water footprint (WF) of six main crops produced in Laguna were estimated during 2010-2020 by following the methodology proposed by the Water Footprint Network. The result of this work gives importance to WF studies in a local setting which can be used as a comparison between different provinces as well as a piece of vital information to guide policy makers to adopt plans for crop-related use of water and food security in the Philippines.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.6 no.1
• /
• pp.143-154
• /
• 2004

The value of daily heating degree hour(described as DH hereafter) is essential for calculating the heating load of a greenhouse during the winter months. Many researchers have so for proposed different models for estimating DH value. Models for estimating DH have been investigated DH(unit, ℃·h·year^-1) in this paper. The comparisons of standard and existed DH values were made to know the estimation error of each model proposed so far. The standard DH values and other proposed DH values have were obtained for the inside setpoint temperatures of 9, 13, 16 and 20℃ in greenhouse, estimated based on meterological data from 1961 to 2000 according to locals, and standard DH values were independent and existed DH values were dependent. Among the various model, the one developed theoretically by Mihara modified to author was the best fitting for standard DH values. The DH values were obtained for the inside setpoint temperature of 9, 13, 16 and 20℃ by Modified Mihara's model. A new DH contour line graph was proposed using Modified Mihara's model. Using the DH contour line graph, the DH values can be obtained easily for any setpoint according to local.

• Current Photovoltaic Research
• /
• v.11 no.1
• /
• pp.27-33
• /
• 2023

In this paper, a machine learning model by using a regression algorithm is proposed to estimate the power generation performance of the BIPV system. The physical model formula for estimating the generation performance and the proposed model were compared and analyzed. For the physical model formula, simple efficiency model, temperature correction model, and regressive physics model for changing an irradiance were used. As a result, when comparing the regressive physics model for changing an irradiance and the proposed model with the actual generation measured data, the respective RMSE values are 0.1497 kW, 0.0451 kW and the accuracy values are 86.44%, and 96.56%. Therefore, the proposed model implemented in this experiment can be useful in estimating power generation.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1563-1570
• /
• 2023

In this study, a DeCART/MIG uncertainty quantification (UQ) analysis code system with a multicorrelated cross section stochastic sampling (S.S.) module was established and verified through the UAM (Uncertainty Analysis in Modeling) and the BEAVRS (Benchmark for Evaluation And Validation of Reactor Simulations) benchmark calculations. For the S.S. calculations, a sample of 500 DeCART multigroup cross section sets for two major actinides, i.e., ²³⁵U and ²³⁸U, were generated by the MIG code and covariance data from the ENDF/B-VII.1 evaluated nuclear data library. In the three pin problems (i.e. TMI-1, PB2, and Koz-6) from the UAM benchmark, the uncertainties in k_inf by the DeCART/MIG S.S. calculations agreed very well with the sensitivity and uncertainty (S/U) perturbation results by DeCART/MUSAD and the S/U direct subtraction (S/U-DS) results by the DeCART/MIG. From these results, it was concluded that the multi-group cross section sampling module of the MIG code works correctly and accurately. In the BEAVRS whole benchmark problems, the uncertainties in the control rod bank worth, isothermal temperature coefficient, power distribution, and critical boron concentration due to cross section uncertainties were calculated by the DeCART/MIG code system. Overall, the uncertainties in these design parameters were less than the general design review criteria of a typical pressurized water reactor start-up case. This newly-developed DeCART/MIG UQ analysis code system by the S.S. method can be widely utilized as uncertainty analysis and margin estimation tools for developing and designing new advanced nuclear reactors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.259-259
• /
• 2020

증발산량은 수문학적으로는 강수량으로부터 지표 유출량과 지하수 함양량을 추정하는 등 전체 물수지를 해석하는데 있어서 매우 중요하며, 농업적 측면에서는 작물의 용수 수요량을 결정하는 중요한 인자이다. 그러나 증발산량의 직접적인 계측이 쉽지 않기 때문에 물수지 방법에 의한 간접적인 추정이나 관련된 기상자료를 이용한 경험적이고 물리적인 해석을 통해 산정하고 있다. 일반적으로 특정조건의 작물(기준작물)을 기준으로 가용수분이 충분한 상태에서 주어진 기상조건에 대해 기준증발산량을 산정하며, 여기에 대상작물별 특성이나 토양의 실제수분상태 등을 고려하여 실제증발산량을 추정하고 있다. 본 연구에서는 한강권역을 대상으로 현재 가장 일반적으로 활용되고 있는 Penman-Monteith 방법을 비롯하여, Thornthwaite 방법, Hamon 방법, Priestly-Taylor 방법, Hargreaves-Samani 방법, Hansen 방법 등 총 6종의 기준증발산량을 산정하여 비교하였다. 각 방법에 필요한 기상자료는 한강권역 및 인근에 위치한 기상청 관할의 33개 ASOS 지점에 대한 60년간(1960~2019년)의 관측자료를 이용하였다. Penman-Monteith 방법에 의한 값을 기준으로 나머지 5가지 방법들에 의한 결과를 분석한 결과, 전반적으로 다른 방법들이 기준증발산량을 크게 산정하는 것으로 나타났으며, temperature-based 접근법인 Hamon과 Hargreaves-Samani에 의한 연평균 값은 Penman-Monteith 방법 대비 각각 28.5%, 19.3% 정도 크게 산정되었다. 특히 Hamon 방법에 의한 결과는 다른 방법과 비교하여 여름철에 크게 차이를 보였다. 반면 Hansen 방법은 상대적으로 Penmna-Monteith 방법과 가장 적은 편차를 나타내었다. 지역별로 분석했을 때는 서울/인천지역과 강원도 동해안 지역을 제외하고는 Penman-Monteith 방법 대비 다른 방법들의 기준증발산량이 큰 것으로 나타났다. 중권역별로는 Penman-Monteith 결과와 비교하여 -158 mm/yr 에서 최대 +307 mm/yr 정도의 편차를 나타내었으며, 월별로는 -13 mm에서 +73 mm의 편차가 나타났다.