• 생태와환경
• /
• 제41권2호
• /
• pp.247-263
• /
• 2008

A two-dimensional (2D) reservoir hydrodynamics and water quality model, CE-QUAL-W2, is employed to simulate the hydrothermal behavior and density current regime in Andong Reservoir. Observed data used for model forcing and calibration includes: surface water level, water temperature, dissolved oxygen and suspended solids concentration. The model was calibrated to the year of 2003 and verified with continuous run from 2000 till 2004. Without major adjustments, the model accurately simulated surface water levels including the events of large storm. Deep-water reservoirs, like Andong Reservoir, located in the Asian Monsoon region begin to stratify in summer and overturn in fall. This mixing pattern as well as the descending thermocline, onset and duration of stratification and timing of turnover phenomenon were well reproduced by the Andong Model. The temperature field and distinct thermocline are simulated to within $2^{\circ}C$ of observed data. The model performed well in simulating not only the dissolved oxygen profiles but also the metalimnetic dissolved minima phenomenon, a common1y occurring phenomenon in deep reservoirs of temperate regions. The Root Mean Square Error (RMSE) values of model calibration for surface water elevation, temperature and dissolved oxygen were 0.0095 m, $1.82^{\circ}C$, and $1.13\;mg\;L^{-1}$, respectively. The turbid storm runoff, during the summer monsoon, formed an intermediate layer of about 15 m thickness, moved along the metalimnion until being finally discharged from the dam. This mode of transport of density current, a common characteristic of various other large reservoirs in the Asian summer monsoon region, was well tracked by the model.

• Journal of Astronomy and Space Sciences
• /
• 제19권2호
• /
• pp.123-132
• /
• 2002

다목적 실용위성 1호는 고도 685km, $98^{\circ}$의 궤도 경사각를 가지며, 탑재된 이온층 측정 센서(Ionospheric Measurement Sensor)로 전자 온도와 전자 밀도를 측정하였다. 이 관측 자료로부터 22:50LT인 밤 시간에 $+60^{\circ}~-60^{\circ}$의 저위도 지역에서 자기적으로 안정한 상태(Kp <4)의 계절별 전자 밀도와 전자 온도의 분포를 구하였다. 관측 결과, 전자 온도와 전자 밀도의 분포는 계절과 경도에 따라 변화를 나타냈다. 대체로 전자 밀도는 자기 적도 부근에서 높아지고, 전자 온도는 낮아지는 경향을 보였다. 봄, 가을에는 전자 밀도와 온도 모두 자기 적도를 중심으로 대칭적으로 분포하였다. 그러나 여름에는 전체적으로 북반구 쪽으로 이동하여 전자 밀도의 극대점과 전자 온도의 극소점이 자기 적도 북쪽에 위치하였고, 겨울에는 이와 반대의 변화를 나타냈다. 또한, 각 계절에서 경도에 따라서도 전자 온도와 밀도 분포의 차이를 보였다. 이러한 차이가 생기는 원인은 경도와 계절에 따라 달라지는 F층의 중성 바람이 이온층 플라즈마에 영향을 주는 것에 의해 설명될 수 있다. 이 관측에서 얻은 전자온도와 밀도의 분포는 IRI95모델을 이용해 구한 분포와 차이를 보였다.

• 한국환경과학회지
• /
• 제24권5호
• /
• pp.601-613
• /
• 2015

On the study of the characteristics and life cycle of mesoscale convective band in type of airmass that occurred in the Honam area from June to September for only 4 years in the period of 2009~2012, 10 examples based on the amount of rainfall with AWS 24 hours/60 minutes rainfalls, Mt. Osung radar 1.5 km CAPPI/X-SECT images and KLAPS data for convective band with heavy rainfall event were selected. There were analyzed and classified by using the convective band with heavy rainfall occurred along the convergence line of sea wind in the form of individual multi-cellular cell and moving direction of convective band appeared in a variety of patterns; toward southwestern (2 cases), northeastern (4 cases), congesting (2 cases), and changing its moving direction (2 cases). The case study dated of the 17th Aug. 2012 was chosen and implemented by sequentially different evolution of its shape along the convergence line of sea wind cell and moving direction of convective band as equivalent potential temperatures at the lower layer have increased to the upper layer 500 hPa, that the individual cells were developed vertically and horizontally through their merger, but owing to divergence caused by weakened rainfall and descending air current, the growth of new cell was inhibited resulting in dissipation of convective cells.

• 전기화학회지
• /
• 제17권1호
• /
• pp.26-29
• /
• 2014

The corrosion behavior of stainless steel 304 (SS 304), titanium, nickel and aluminium is studied by immersion and anodic polarization tests in non-aqueous electrolytes. Tetraethyl ammonium tetrafluoroborate is used as a supporting electrolyte in the three kinds of solvents. The immersion test shows that chemical corrosion rate in propylene carbonate-based electrolyte is lower than those in acetonitrile- or ${\gamma}$-butyrolactone-based electrolytes. Surface analyses do not reveal any corrosion product formed after the immersion test. In the anodic polarization tests, a higher concentration of supporting electrolyte gives a higher current density. In addition, a higher temperature increases the current density in the active region and reduces the potential range in the passive region. SS 304 shows the highest corrosion potential while Al shows the lowest corrosion potential and the highest current density in all studied conditions. Based on the conducted corrosion tests, the corrosion resistance of metal substrates in the organic solvents can be sorted in descending order as follows: SS 304 - Ti - Ni - Al.

• 경영과정보연구
• /
• 제2권
• /
• pp.95-106
• /
• 1998

Color Echo-sounder display signals reflected from underwater objects in eight colors according to the strength of the signal. When the sea bottom is hard due to the presence of rocks, etc, the trailing on the reflection become strong signal and soft to presence of mud, etc the trailing on the reflection become weak signal. Strong signals are displayed in the color range, reddish brown, orange and yellow, in descending order of intensity. Weak signals are displayed in the range blue, light blue, cyan and green, in ascending order of intensity. Image of fish schools at or near the sea bottom vary according to the characteristics of the beam angle setting. When the angle is wide, even fish not near the bottom may be recorded as being on the seabed. A narrow angle should, therefore, be selected when you want to get an accurate recording of fish at or near the sea bottom. The condition of the sea bottom can be determinded more easily when the beam angle is wide and pulse with is long. Though the objects could be verified by the type of reflected signals which have been transformed into digital signals strong middle and weak ones, the experiments have in continue under various condition. Futhermore, the methode of measuring temperature inside the sea ought to be examined.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.945-956
• /
• 1999

This work reports a set of approximate analytical solutions describing the initial transient process of close-contact melting between a rectangular parallelepiped solid and a flat plate on which either constant temperature or constant heat flux is imposed. Not only relative motion of the solid block tangential to the heating plate, but also the density difference between the solid and liquid phase is incorporated in the model. The thin film approximation reduces the force balance between the solid weight and liquid pressure, and the energy balance at the melting front into a simultaneous ordinary differential equation system. The normalized model equations admit compactly expressed analytical solutions which include the already approved two-dimensional solutions as a subset. In particular, the normalized liquid film thickness is independent of all pertinent parameters, thereby facilitating to define the transition period of close-contact melting. A unique behavior of the solid descending velocity due to the density difference is also resolved by the present solution. A new geometric function which alone represents the three-dimensional effect is introduced, and its properties are clarified. One of the representative results is that heat transfer is at least enhanced at the expense of the increase in friction as the cross-sectional shape deviates from the square under the same contact area.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.672-681
• /
• 2015

As a part of abating the formaldehyde emission of amino resin-bonded wood-based composite panels, this study was conducted to investigate hydrolytic stability of urea-melamine-formaldehyde (UMF) resin depending on various hydrolysis conditions and hardener types. Commercial UMF resin was cured and ground into a powdered form, and then hydrolyzed with hydrochloric acid. After the acid hydrolysis, the concentration of liberated formaldehyde in the hydrolyzed solution and mass loss of the cured UMF resins were determined to compare their hydrolytic stability. The hydrolysis of cured UMF resin increased with an increase in the acid concentration, time, and temperature and with a decrease in the smaller particle size. An optimum hydrolysis condition for the cured UMF resins was determined as $50^{\circ}C$, 90 minutes, 1.0 M hydrochloric acid and $250{\mu}m$ particle size. Hydrolysis of the UMF resin cured with different hardener types showed different degrees of the hydrolytic stability of cured UMF resins with a descending order of aluminum sulfate, ammonium chloride, and ammonium sulfate. The hydrolytic stability also decreased as the addition level of ammonium chloride increased. These results indicated that hardener types and level also had an impact on the hydrolytic stability of cured UMF resins.

• Nuclear Engineering and Technology
• /
• 제33권4호
• /
• pp.397-408
• /
• 2001

A marine reactor shows very different thermal-hydraulic characteristics compared to a land- based reactor. Especially, study on the variation of flow field due to ship motions such as inclination, heaving and rolling is essential since the flow variation has great influence on the reactor cooling capability. In this study, the natural circulation characteristics of integral type marine reactor with modular steam generators were analyzed using computational fluid dynamics code, CFX-4, for inclined conditions. The numerical analyses are performed using the results of natural circulation experiments for integral reactor which are already conducted at Seoul National University. From the results, it was found that the flow rate in the ascending steam generator cassettes increases due to buoyancy effect. Due to this flow variation, temperature difference occurs at the outlets of the each steam generator cassettes. which is mitigated through downcomer by thermal mixing. Also, around the upper pressure header the flow from descending hot leg goes up to the ascending steam generator cassettes due to large natural circulation driving force in ascending steam generator cassettes. From this result, the increase of How rate in the ascending steam generator cassettes could be understood qualitatively.

• 한국조리학회지
• /
• 제13권4호
• /
• pp.211-219
• /
• 2007

The objective of this study was to investigate the influence of adding Gastrodiae rhizoma powder on quality attributes of sponge cake. The cake was made with various Gastrodiae rhizoma powder concentration(0.5%, 1%, and 1.5%) added, and it was stored for 5 days at three different temperatures(5, 15, and $25^{\circ}C$). By analyzing the mixogram data of wheat flour-Gastrodiae rhizoma powder composite flour, the ascending angle of the samples containing Gastrodiae rhizoma powder was increased and the descending angle had upper values compared with that of control as the Gastrodiae rhizoma powder addition concentration was increased. The loaf volume of 0.5% Gastrodiae rhizoma powder slightly increased by 5.1% but those of 1% and 1.5% were slightly decreased compared with that of the control. Crumb firmness of the control showed relatively high value compared with those($5{\sim}6\;N$) of other samples containing Gastrodiae rhizoma powder regardless of storage temperature and storage period, and the firmness after 5 day storage at $5^{\circ}C$ showed the highest value(about 9.3 N). Sensory evaluation attributes of sponge cakes did not show significant difference by Gastrodiae rhizoma powder addition up to concentration of 1.5%.

• 한국응용곤충학회지
• /
• 제43권4호
• /
• pp.305-310
• /
• 2004

복숭아혹진딧물(Myzus persicae)의 온도별 발육상을 조사하기 위해 $15^{\circ}C$에서 $32.5^{\circ}C$까지 $2.5^{\circ}C$ 간격으로 8개 온도에서 조사를 하였으며, 상대습도는 $70{\pm}5\%$, 광주기는 16L:8D 조건으로 처리하였다. 일반적으로 진딧물의 약충 단계는 1령에서 4령가지로 구분하나 본 연구에서는 1-2령을 (1st-2nd nymph), 3-4령을(3rd-4th nymph)이라 하여 2단계로 구분하였다. 대부분의 온도에서 사망률은 초기 1-2령이 3-4령보다 더 높았으나 $32.5^{\circ}C$에서는 오히려 3-4령의 사망률이 대부분을 차지하였다. 온도별 발육기간은 $15^{\circ}C$에서 12.4일로 가장 길었고 온도가 상승함에 따라 점차 짧아져 $27.5^{\circ}C$에서는 4.9일로 가장 짧았으나 30에서 $32.5^{\circ}C$까지는 오히려 5.0일과 6.3일로 발육 기간이 길어지는 양상을 보였다. 약충의 발육영점온도는 $4.9^{\circ}C$이고, 유효적산온도는 116.5일도 이었다. 각 온도별 발육률은 변형된 Sharpe와 DeMichele의 비선형 모형에 잘 적합되었다. 발육단계별 발육기간을 표준화하여 누적시킨 값을 3개의 변수를 갖는 Weibull function에 적용하여 보았을 때 1-2령${\to}$3-4령${\to}$ 전체 약충 순으로 발육기간이 짧아지는 경향을 보여 주었고 $r^2$는 0.87-0.94로 나타났다.