• Horticultural Science & Technology
• /
• v.33 no.6
• /
• pp.911-922
• /
• 2015

This study was carried out to evaluate growth characteristics of Kimchi cabbage cultivated in various highland areas, and to create a predicting model for the production of highland Kimchi cabbage based on the growth parameters and climatic elements. Regression model for the estimation of head weight was designed with non-destructive measured growth variables (NDGV) such as leaf length (LL), leaf width (LW), head height (HH), head width (HW), and growing degree days (GDD), which was $y=6897.5-3.57{\times}GDD-136{\times}LW+116{\times}PH+155{\times}HH-423{\times}HW+0.28{\times}HH{\times}HW{\times}HW$, ($r^2=0.989$), and was improved by using compensation terms such as the ratio (LW estimated with GDD/measured LW ), leaf growth rate by soil moisture, and relative growth rate of leaf during drought period. In addition, we proposed Excel spreadsheet model for simulation of yield prediction of highland Kimchi cabbage. This Excel spreadsheet was composed four different sheets; growth data sheet measured at famer's field, daily average temperature data sheet for calculating GDD, soil moisture content data sheet for evaluating the soil water effect on leaf growth, and equation sheet for simulating the estimation of production. This Excel spreadsheet model can be practically used for predicting the production of highland Kimchi cabbage, which was calculated by (acreage of cultivation) ${\times}$ (number of plants) ${\times}$ (head weight estimated with growth variables and GDD) ${\times}$ (compensation terms derived relationship of GDD and growth by soil moisture) ${\times}$ (marketable head rate).

• Journal of Bio-Environment Control
• /
• v.21 no.2
• /
• pp.147-152
• /
• 2012

This study was conducted to investigate the photosynthetic R. micranthum by natural habitats. In the results, natural habitats didn't affect values of light saturated point, light compensation point and photosynthetic capacity of R. micranthum. We investigated light response curve and chlorophyll content at each habitat. Light compensation points were 11.8 ${\mu}mol\;m^{-2}\;s^{-1}$, 11.5 ${\mu}mol\;m^{-2}\;s^{-1}$ and 10.4 ${\mu}mol\;m^{-2}\;s^{-1}$ in Seokpo-ri, Yeonha-ri, and Mt. Worak. Light saturation points showed that R. micranthum is shade tolerant specie which has the light saturation point approximately 500~600 ${\mu}mol\;m^{-2}\;s^{-1}$. Photosynthetic rates of R. micranthum leaves were 5.5 ${\mu}mol\;m^{-2}\;s^{-1}$, 5.4 ${\mu}mol\;m^{-2}\;s^{-1}$ and 5.6 ${\mu}mol\;m^{-2}\;s^{-1}$ in Seokpo-ri, Yeonha-ri and Mt. Worak. On the other hand, since between $20^{\circ}C$ and $30^{\circ}C$, it appeared that the values of net photosynthetic rates of R. micranthum leaves in all sites were high. Especially, the rates were highest at $25^{\circ}C$. Because of low stomatal transpiration rate in saturation radiance, the moisture utilization efficiency in Yeonha-ri was lower than other habitats. Rates of chlorophyll a, chlorophyll b, and total chlorophyll content in Mt. Worak were no significant difference. Therefore R. micranthum has characteristic of shade tolerant species. The moderate temperature for R. micranthum is between $20^{\circ}C$ and $30^{\circ}C$.

• Journal of Korean Society of Forest Science
• /
• v.54 no.1
• /
• pp.49-59
• /
• 1981

In order to elucidate the process of plant succession of the Japanese red pine forests caused by pine gall midge, Thecodoplosis japonensis, in the area of Chungbuk and Kyongbuk, 12 study plots, 4 plots from each three districts, were set up. Districts A (Cheongwon)not attacked by this insect, as the check, District B(Gumi) in which the insect outbreak occured 5 years ago, and District C(Yeongdong)in which the insect outbreak occured 10 years ago, were sampled. The surveyed were some environmental factors, the number of woody plants, relative density, relative dominance values, species composition of plots by layer(upper, middle and ground), importance values, species diversity, similarity and dissimilarity index, etc. The results obtained are summarized as follows: The accumulation of litter on the ground was increased with the lengthening the insect damage duration. Through the crown opening and litter accumulation, the light intensity, temperature condition and soil moisture and nutrient content might be altered. According to the changes of species composition were forced. In general, the Genus Quercus, as a compensation species, has sprung up. The relative importance values for Q.aliena, Q.serrata, and Q.variabilis were significantly increased in the insect infested forests. 2. the stand structure and species composition of the insect attacked forest about 5 years later after the outbreak become complex and diverse. However, since this time, the simplicity of these regards become restored up to 10 years after the outbreak. 3. As the synthetic analysis of plant succession process, the relative values calculated from the relative density and the relative dominance values shown the dominant status of Genus Quercus in the heavily damaged forests. In addition, Genus Rhododendron and Genus Lespedeza with higher frequency become the ground vegetation components. They were gradually increased along the time elapsing after the insect out-break. 4. The differences in connection with the soil moisture contents, the organic matter contents which might give some influences to the vegetation change were hardly recognizable statistically among the studied plots by three district groups. We estimated that the annual mean precipitation and the annual mean temperature did not operated any meaningful effects on the vegetation alteration among plots between districts.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.4
• /
• pp.268-276
• /
• 2018

BACKGROUND: In the month of January 2018, fine dust alerts and warnings were issued 36 times for $PM_{10}$ and 81 times for PM2.5. Air quality is becoming a serious issue nation-wide. Although interest in air-purifying plants is growing due to the controversy over the risk of chemical substances of regular air-purifying solutions, industrial spread of the plants has been limited due to their efficiency in air-conditioning perspective. METHODS AND RESULTS: This study aims to propose a vegetation-based bio-filter system that can assure total indoor air volume for the efficient application of air-purifying plants. In order to evaluate the quantitative performance of the system, time-series analysis was conducted on air-conditioning performance, indoor air quality, and comfort index improvement effects in a lecture room-style laboratory with 16 persons present in the room. The system provided 4.24 ACH ventilation rate and reduced indoor temperature by $1.6^{\circ}C$ and black bulb temperature by $1.0^{\circ}C$. Relative humidity increased by 24.4% and deteriorated comfort index. However, this seemed to be offset by turbulent flow created from the operation of air blowers. While $PM_{10}$ was reduced by 39.5% to $22.11{\mu}g/m^3$, $CO_2$ increased up to 1,329ppm. It is interpreted that released $CO_2$ could not be processed because light compensation point was not reached. As for the indoor comfort index, PMV was reduced by 83.6 % and PPD was reduced by 47.0% on average, indicating that indoor space in a comfort range could be created by operating vegetation-based bio-filters. CONCLUSION: The study confirmed that the vegetation-based bio-filter system is effective in lowering indoor temperature and $PM_{10}$ and has positive effects on creating comfortable indoor space in terms of PMV and PPD.

• Journal of the Korean Chemical Society
• /
• v.37 no.5
• /
• pp.503-512
• /
• 1993

The purpose of this study was to investigate the retention behavior of phenols and to predict their retention in RPLC. The retention data of twenty-five phenols were measured on a $\mu-{Bondapak}\;C_{18}$ and a polymeric $C_{18}$ columns with methanol-water and acetonitrile-water as a mobile phase. From the observation of enthalpy-entropy compensation phenomenon, the following conclusions are drawn with regard to the retention mechanism: 1) the retention mechanism of nitrophenols in different from that of metheyl-and chlorophenols in both mobile phase; 2) in methanol-water mobile phase, the retention mechanism of methyl-and chlorophenols is consistent in the range of methanol-water composition; 3) on the other hand, in the case of acetonitrile-water mobile phase, the retention mechanism depends on the volume fraction of acetonitrile. It means that the retention mechanism can not be explained only by a simple interaction. Based on retention data as compared with two columns, it may be said that the hydrophobic interaction of phenols with polymeric $C_{18}$ column was greater than that with monomeric $C_{18}$ column. The equations for predicting the retention of phenols were derived by using hydrophobic substituent constant $(\pi)$ and the sum of Hammett's constant $(\sigma)$ and Taft's steric constant $(E_s)$.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.486-491
• /
• 2008

This paper describes a model identification method that has been applied to a commercial 12-inch RTP (rapid thermal processing) equipment with an ultimate aim to develop a high-performance advanced controller. Seven thermocouples are attached on the wafer surface and twelve tungsten-halogen lamp groups are used to heat up the wafer. To obtain a MIMO balanced state space model, multiple SIMO (single-input multiple-output) identification with highorder ARX models have been conducted and the resulting models have been combined, transformed and reduced to a MIMO balanced state space model through a balanced truncation technique. The identification experiments were designed to minimize the wafer warpage and an output linearization block has been proposed for compensation of the nonlinearity from the radiation-dominant heat transfer. As a result from the identification at around 600, 700, and $800^{\circ}C$, respectively, it was found that $y=T(K)^2$ and the state dimension of 80-100 are most desirable. With this choice the root-mean-square value of the one-step-ahead temperature prediction error was found to be in the range of 0.125-0.135 K.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.63-69
• /
• 1999

The electrical properties of rf-magnetron sputtered $Ba_{0.5}Sr_{0.3}TiO_3$ (BST) capacitors were investigated by varying annealing temperature and atmosphere of the rapid thermal annealing (RTA). The electrical properties of Pt/BST/Pt capacitors were found to strongly depend on the RTA condition. It seems that the dependence of the electrical properties of the Pt/BST/Pt capacitors on the RTA condition is related to the oxygen vacancies in BST thin films. In order to clarify the relation between the oxygen vacancies and the electrical properties of Pt/BST/Pt capacitors, we have examined the two different annealing methods. One annealing method was performed in $O_2$ gas and the other was done in $O_2$-plasma at the same condition of 450$^{\circ}C$, 20 mtorr. It was found that the leakage current densities of $O_2$-plasma annealed capacitor were much lower than those of $O_2$ annealed capacitor. The dielectric constants of $O_2$ annealed capacitor decreased about 14% comparing with those of as-deposited. In contrast, there was no decrease in the dielectric constant of $O_2$-plasma annealed. These results indicate that $O_2$-plasma annealing is very effective in compensation the oxygen vacancies in BST thin films. It can be also concluded that the oxygen vacancies greatly affect the electrical properties of Pt/BST/Pt capacitors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.596-601
• /
• 2020

Silicon carbide is considered a potentially useful material for high-temperature electronic devices because of its large band gap energy and p-type or n-type conduction that can be controlled by impurity doping. Accordingly, the thermoelectric properties of -SiC powder prepared by refined diatomite were investigated for high value-added applications of natural diatomite. -SiC powder was synthesized by a carbothermal reduction of the SiO₂ in refined diatomite using carbon black. An acid-treatment process was then performed to eliminate the remaining impurities (Fe, Ca, etc.). n-Type semiconductors were fabricated by sintering the pressed powder at 2000℃ for 1~5h in an N2 atmosphere. The electrical conductivity increased with increasing sintering time, which might be due to an increase in carrier concentration and improvement in grain-to-grain connectivity. The carrier compensation effect caused by the remaining acceptor impurities (Al, etc.) in the obtained -SiC had a deleterious influence on the electrical conductivity. The absolute value of the Seebeck coefficient increased with increasing sintering time, which might be due to a decrease in the stacking fault density accompanied by grain or crystallite growth. On the other hand, the power factor, which reflects the thermoelectric conversion efficiency of the present work, was slightly lower than that of the porous SiC semiconductors fabricated by conventional high-purity -SiC powder, it can be stated that the thermoelectric properties could be improved further by precise control of an acid-treatment process.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.27 no.3
• /
• pp.245-256
• /
• 2017

Objectives: The present study is aimed at performing real-time measurement of fibrous materials using an F-1 fiber monitor, investigating the correlations between the measurements and environmental conditions, and assessing the feasibility of the use of the monitor in actual exposure assessments based on the accuracy and reliability of the device. Methods: Asbestos specimens with a fixed asbestos content were dispersed in a chamber and collected with a particle measuring test device. Measurements obtained by the existing PCM method, and with the F-1 fiber monitor were compared. In addition, concentrations of asbestos fibers obtained by the PCM method, the TEM method, and the F-1 fiber monitor were compared with that of specific ABS scenarios in NOA regions. Correlations of asbestos contents in soil and weather conditions with each method of measurement were analyzed. Results: Laboratory results showed that levels of asbestos fibers measured with each method increased as fiber contents in soil increased. In the accuracy and reproducibility assessment, no significant differences were found between the different methods of measurement. On-site assessment results showed positive correlations among the methods, and these correlations were less significant compared with what was shown by the laboratory results. Levels of asbestos fibers increased as asbestos contents in soil increased, and as temperature increased. Levels of asbestos fibers decreased as humidity increased, and wind speed did not significantly affect the extent to which asbestos fibers were scattered. Conclusions: While it would be premature to replace existing methods with the use of F-1 fiber monitors in real sites based on the results of this study, the monitor may be useful in the screening of the sites, which assesses hazard levels in different regions. Replacement of existing methods with the use of F-1 fiber monitors may be possible after the limitations identified in this study are overcome, and additional assessment data are obtained and reviewed under different conditions to confirm the reliability of the monitor in future research. Obtained assessment results may be used as basic data for the assessment of asbestos hazard in NOA regions.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.107-119
• /
• 1993

The purpose of this study is to investigated the elution behavior of platinoid metal acetylacetonates, which is the key to elucidate their retention mechanism and optimize their RPLC separation conditions. The retention data of four platinoid metal acetylacetonates have been measured on four different columns in methanol-water and acetonitrile-water systems. The retention of uncharged platinoid metal acetylacetonates is interpreted by solvophobic effect. The retention of platinoid metal acetylacetonates is also greatly influenced by the geometric structure of the complexes. The square planar chelates, $Pd(acac)_2$, $Pt(acac)_2$, are retained longer than the octahedral chelates, $Rh(acac)_3$, $Ir(acac)_3$. It is likely due to that square planar chelates show greater interaction with nonpolar stationary phase than octahedral chelates. The results of van't Hoff plots have shown that platinoid metal acetylacetonates is operated on the same retention mechanism in the temperature range of $25{\sim}45^{\circ}C$. The study of the retention mechanism by the enthalpy-entropy compensation phenomenon has indicated that the retention mechanism of octahedral chelates and square planar chelates do not vary with the composition change of methanol-water mobile phase, respectively. In acetonitrile-water mobile phase, however, the retention mechanism is observed to be more complicated. Optimum condition for the separation of four platinoid metal acetylacetonates is found to be 40% methanol, polymeric C18 column, and $45^{\circ}C$.