• Journal of the Korean Society for Environmental Technology
• /
• v.19 no.6
• /
• pp.576-585
• /
• 2018

Systematic management during the whole life cycle from construction to operation and maintenance is very important for the seven underground pipelines (waterworks, sewerage, electricity, telecommunications, gas, heating, oil including waterworks and sewerage). Especially, it is the construction process that affects the whole life cycle of underground buried pipeline. In order to construct a new city or to maintain different underground pipes, it is always necessary to dig the ground and carry out construction and related work. There is a possibility that secondary and tertiary breaks frequently occur in the pipeline construction process after the piping constructed first in this process. To solve this problem, a system is needed which can monitor damage in real time. However, the supply of electric power for continuous operation of the system is limited according to the environment of underground buried pipelines, so it is necessary to develop a stable electric power supply system using natural energy rather than existing electric power. In this study, we developed a system that can operate the pipeline monitoring system for long time (24 hours and 15 days) using natural energy using wind and solar light.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.267-274
• /
• 2022

In this paper, we report the design and fabrication of binary diffractive optical elements (DOEs) for random-dot-pattern projection for Schlieren imaging. We selected the binary phase level and a pitch of 10 ㎛ for the DOE, based on cost effectiveness and ease of manufacture. We designed the binary DOE using an iterative Fourier-transform algorithm with binary phase optimization. During initial optimization, we applied a computer-generated pseudorandom dot pattern of uniform intensity as a target pattern, and found significant intensity nonuniformity across the field. Based on the evaluation of the initial optimization, we weighted the target random dot pattern with Gaussian profiles to improve the intensity uniformity, resulting in the improvement of uniformity from 52.7% to 90.8%. We verified the design performance by fabricating the designed binary DOE and a beam projector, to which the same was applied. The verification confirmed that the projector produced over 10,000 random dot patterns over 430 mm × 430 mm at a distance of 5 meters, as designed, but had a slightly less uniformity of 84.5%. The fabrication errors of the DOE, mainly edge blurring and spacing errors, were strong possibilities for the difference.

• Journal of Legislation Research
• /
• no.44
• /
• pp.155-184
• /
• 2013

This study takes a critical perspective that current vertical regulatory framework for broadcasting, telecommunications, films and games cannot cope with media development in the age of convergence. Changes in media environment mitigate the uniqueness of terrestrial television causing doubts as to why television contents should be treated more strictly than the rest of media contents. Consensus is being reached that horizontal regulation would be the appropriate regulatory measure for media contents. However, which content should be aligned to what level of regulations have not been fully dealt with. The paper shows that the current regulatory framework which is established according to each delivery platform is no longer valid in convergent media environment. It shows why all content regulation should be applied in platform neutral manner. Then it also suggests both short and long term regulatory changes that need to be made in order to meet the future challenges in media convergence era.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.2
• /
• pp.39-47
• /
• 2008

Among previous Side Channel Analysis (SCA) methods, Differential Power Analysis (DPA) based on the statistical characteristics of collected signals has been known as an efficient attack for uncovering secret key of cryptosystems. However, the attack performance of this method is affected very much by the temporal misalignment and noise of collected side channel signals. In this paper, we propose a new method to surmount the noise problem in DPA. The performance of the proposed method is then evaluated while analyzing the power consumption signals of Micro-controller chips during a DES operation. Its performance is then compared to that of the original DPA in the time and frequency domains. When we compare the experimental results with respect to the needed number of traces to uncover the secret key, our proposed method shows the performance enhancement 33% in the time domain and 50% in the frequency domain.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.2
• /
• pp.11-21
• /
• 2009

The NTRU cryptosystem proposed by Hoffstein et al. in 1990s is a public key cryptosystem based on hard lattice problems. NTRU has many advantages compared to other public key cryptosystems such as RSA and elliptic curve cryptosystems. For example, it guarantees high speed encryption and decryption with the same level of security, and there is no known quantum computing algorithm for speeding up attacks against NTRD. In this paper, we analyze the security of NTRU against the simple power analysis (SPA) attack and the statistical power analysis (STPA) attack such as the correlation power analysis (CPA) attack First, we implement NTRU operations using NesC on a Telos mote, and we show how to apply CPA to recover a private key from collected power traces. We also suggest countermeasures against these attacks. In order to prevent SPA, we propose to use a nonzero value to initialize the array which will store the result of a convolution operation. On the other hand, in order to prevent STPA, we propose two techniques to randomize power traces related to the same input. The first one is random ordering of the computation sequences in a convolution operation and the other is data randomization in convolution operation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.5
• /
• pp.59-69
• /
• 2009

RFID tag search system which is used to find a specific tag has an application such as asset management, supply chain, and this search scheme has been given much attention so far. In RFID tag search system, especially, mobility of the reader is important in order to search tags. Therefore, even though the handheld reader cannot connect with the central database because of unreliable wireless connection or remote location, handheld reader should search the specific tag without help of the central database. In addition, in RFID tag search system, users hold not the tag but the reader, the privacy of users should be considered. Since the signal strength of the reader is stronger than that of the tag, the privacy of the reader holder is very important. Recently, in order to solve these problems, a number of RFID tag search schemes have been proposed. However, since these schemes did not consider the privacy of reader holders, there are serious privacy breaches of reader holders. In this paper, we propose efficient RFID tag search protocol for passive tags. Our proposed scheme preserves the privacy of reader holders.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.338-347
• /
• 2021

In this paper, the beta-ray sensor circuit used in the true random number generator was designed using DB HiTek's 0.18㎛ CMOS process. The CSA circuit proposed a circuit having a function of selecting a PMOS feedback resistor and an NMOS feedback resistor, and a function of selecting a feedback capacitor of 50fF and 100fF. And for the pulse shaper circuit, a CR-RC2 pulse shaper circuit using a non-inverting amplifier was used. Since the OPAMP circuit used in this paper uses single power instead of dual power, we proposed a circuit in which the resistor of the CR circuit and one node of the capacitor of the RC circuit are connected to VCOM instead of GND. And since the output signal of the pulse shaper does not increase monotonically, even if the output signal of the comparator circuit generates multiple consecutive pulses, the monostable multivibrator circuit is used to prevent signal distortion. In addition, the CSA input terminal, VIN, and the beta-ray sensor output terminal are placed on the top and bottom of the silicon chip to reduce capacitive coupling noise between PCB traces.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.4
• /
• pp.149-156
• /
• 2021

OTT service, which allows video content to be viewed as a streaming service on the Internet network, has recently attracted a lot of attention, and the number of users is also increasing rapidly. It would be a natural strategy for OTT companies to acquire more content to gain a competitive advantage in relations with traditional media companies and other OTT companies. However, there are research results to show that the investment in facilities by Internet service providers who must transport the increasing Internet traffic from OTT provider to end users should increase as the amount of Internet traffic originated by OTT services also increases. This study empirically analyzed how content investment by Netflix, a leading OTT company, affects its revenue growth and network investment by Internet service providers through a polynomial distributed lag model. And the analysis results show that Netflix's content investment contributes to the company's increase in revenue, and also has an effect on the increase in network investment by Internet service providers. This result confirms that OTT operators' content acquisition strategy is a valid management strategy, and empirically supports the study results that OTT operators need to share the cost of Internet network facility investment.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.81-89
• /
• 2022

The in-situ electromigration(EM) and annealing test were performed at 110, 130, and 150℃ with a current density of 1.3×10⁵ A/cm² conditions to investigate the effect of non-conductive film (NCF) on growth kinetics of intermetallic compound (IMC) in Cu/Ni/Sn-2.5Ag microbump. As a result, the activation energy of the Ni₃Sn₄ IMC growth in the annealing and EM conditions according to the NCF application was about 0.52 eV, and there was no significant difference. This is because the growth rate of Ni-Sn IMC is much slower than that of Cu-Sn IMC, and the growth behavior of Ni-Sn IMC increases linearly with the square root of time, so it has the same reaction mechanism dominated by diffusion. In addition, there is no difference in the activation energy of the Ni₃Sn₄ IMC growth because the EM resistance effect of the back stress according to the NCF application is not large.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.59-64
• /
• 2022

Effects of film stack structure and peeling rate on the peel strength of screen-printed (SP) Ag/polyimide (PI) systems were investigated by a 90° peel test. When PI film was peeled at PI/SP-Ag and PI/SP-Ag/electroplated (EP) Cu structures, the peel strength was nearly constant regardless of the peeling rate. When EP Cu was peeled at EP Cu/SP-Ag/PI structure, the peel strength continuously increased as peeling rate increased. Considering uniaxial tensile test results of EP Cu/SP-Ag film with respect to loading rate, the increase of 90° plastic bending energy and peel strength was attributed to increased flow stress and toughness. On the other hand, viscoelastic PI film showed little variation of flow stress and toughness with respect to loading rate, which was assumed to result in nearly constant 90° plastic bending energy and peel strength.