• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3685-3691
• /
• 2015

We developed the platform safety step system for the passenger to avoid misstep accident and secure the pedestrian safety. In this study, we classify platform safety step system into hierarchy system and predict the failure rate of each part and calculate the failure rate & MTBF(Mean Time Between Failure) of each module(sub-system) by means of RBD(Reliability Block Diagram) & FTA(Fault Tree Analysis). Finally, we will propose the reliability analysis results for RAMS analysis of platform safety step system.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1450-1451
• /
• 2008

To investigate the reliability of the conductive lines patterned by ink-jet printing, we evaluated the reliability of the ink-jet printed silver (Ag) patterns according to the guide lines built up as assessments methods in the production of conventional rigid printed circuit boards. The assessment methods include the uniformity of line width and space, adhesive strength, dielectric withstand, solder float, thermal shock test and pressure cooker test (PCT). To prepare assesment vehicles, different regular test patterns were created by Ag ink-jet printing on the same polyimide substrate for each of assessment methods.

• Journal of Mechanical Science and Technology
• /
• v.17 no.4
• /
• pp.492-500
• /
• 2003

By means of the transformation from the problem of fuzzy reliability to the problem of general reliability, a model for analyzing fuzzy reliability is introduced in this paper Because of the complexity of the Problem of the fuzzy reliability, generally speaking, the analytical equations for calculating fuzzy reliability indexes of machine part cannot be obtained in most cases. Therefore, in this paper, an approach is given wherein progressions are employed to calculate them, or a simulation approach is used to estimate them by expressing general reliability indexes as progressions. By utilizing the approach put forwards in the paper, the calculating quantity for analyzing the fuzzy reliability will be reduced : even substantially reduced sometimes. Some examples are taken to explain the feasibility of the model and a simulation approach.

• Journal of Applied Reliability
• /
• v.16 no.4
• /
• pp.305-312
• /
• 2016

Purpose: The purpose of this study is to provide a sensitivity analysis of system reliability for recognizing effectiveness of changing of BD mode failures using reliability growth projection model based on NHPP. Methods: Crow extended reliability projection model (CERPM) is used to analyze the changing of two factors 1) the number of BD mode failures, 2) fix effectiveness factor (FEF) values. Results: The system reliability has increased in accordance with the number of BD mode failures and FEF values have increased. Conclusion: It is necessary to design failure modes and FEF values to supervise the reliability.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.518-524
• /
• 2013

Recently, probabilistic assessments of nuclear power plant components have generated interest in the nuclear industries, either for the efficient inspection and maintenance of older nuclear plants or for improving the safety and cost-effective design of newly constructed nuclear plants. In the present paper, the partial safety factor (PSF) of wall-thinned nuclear piping is evaluated based on a reliability index method, from which the effect of each statistical variable (assessment parameter) on a certain target probability is evaluated. In order to calculate the PSF of a wall-thinned pipe, a limit state function based on the load and resistance factor design (LRFD) concept is first constructed. As for the reliability assessment method, both the advanced first-order second moment (AFOSM) method and second-order reliability method (SORM) are employed to determine the PSF of each probabilistic variable. The present results can be used for developing maintenance strategies considering the priorities of input variables for structural integrity assessments of wall-thinned piping, and this PSF concept can also be applied to the optimal design of the components of newly constructed plants considering the target reliability levels.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.603-609
• /
• 2013

In this paper, we describe the analysis of inkjet-printed silver (Ag) patterns on epoxy-coated substrates according to several reliability evaluation test method guidelines for conventional printed circuit boards (PCB). To prepare patterns for the reliability analysis, various regular test patterns were created by Ag inkjet printing on flame retardant 4 (FR4) and polyimide (PI) substrates coated with epoxy for each test method. We coated the substrates with an epoxy primer layer to control the surface energy during printing of the patterns. The contact angle of the ink to the coated epoxy primer was $69^{\circ}$, and its surface energy was 18.6 $mJ/m^2$. Also, the substrate temperature was set at $70^{\circ}C$. We were able to obtain continuous line patterns by inkjet printing with a droplet spacing of $60{\mu}m$. The reliability evaluation tests included the dielectric withstanding voltage, adhesive strength, thermal shock, pressure cooker, bending, uniformity of line-width and spacing, and high-frequency transmission loss tests.

• Journal of Applied Reliability
• /
• v.15 no.1
• /
• pp.67-75
• /
• 2015

Differential pressure sensor for DPF (Diesel Particulate Filter) is the important part of a automobile exhaust system. This device measures the pressure of before DOC and after DPF to determine whether the DPF regenerate. In this paper reliability assessment criteria for DPF differential pressure sensor are established on terms of quality calcification test and lifetime test. The former quality certification test comprises general performance test and environmental test. Items which pass the test undergo lifetime test which guarantees the extent of mean lifetime with certain confidence.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1538-1541
• /
• 2005

For reliability evaluation of AC-PDP, one of the most important factor is sealing property. In this paper, the reliability evaluation test method of the commercialized sealing glass frit in AC-PDP was studied. 6 inch AC-PDP panels were tested for evaluation of sealing glass frit by vibration shock test, thermal shock test, non -destructive X-ray inspection, residual stress inspection and residual gas detection. These test methods are proposed as a standard for testing the reliability of sealing glass frit. The main failure mode of sealing glass frit in AC-PDP seems to be the crack propagation from thermal cycling rather than mechanical factor.

• Smart Structures and Systems
• /
• v.22 no.2
• /
• pp.193-200
• /
• 2018

From the viewpoint of engineering applications, the prediction of the failure of bogies plays an important role in preventing the occurrence of fatigue. Fatigue is a complex phenomenon affected by many uncertainties (such as load, environment, geometrical and material properties, and so on). The key to predict fatigue damage accurately is how to quantify these uncertainties. A Bayesian model is used to account for the uncertainty of various sources when predicting fatigue damage of structural components. In spite of improvements in the design of fatigue-sensitive structures, periodic non-destructive inspections are required for components. With the help of modern nondestructive inspection techniques, the fatigue flaws can be detected for bogie structures, and fatigue reliability can be updated by using Bayesian theorem with inspection data. A practical fatigue analysis of welded bogies is utilized to testify the effectiveness of the proposed methods.

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.265-270
• /
• 2011

This paper describes a reliability/durability test of the remanufactured steering gear units. There used to be government restrictions to remanufacture certain types of automotive components regarding safety of passengers. Nevertheless, scientific approach to sustainability and remanufacturing process provided solid evidence of highly beneficial sides of reusing the products. Failure mode analysis of the steering gear unit is performed and main failure is found out. The unit is remanufactured by fixing the failure and its quality is assessed through designing a new sequence of loading events. Oil leakage is witnessed as a possible failure and its volume is measured. Conclusions based on laboratory condition durability test are given at the end.