• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.331-338
• /
• 2007

Licorice, Glycyrrhizae Radix is widely used as a herbal medicines and a dietary supplements in East Asia. We employed high performance liquid chromatography electrospray ionization tandem mass spectrometry to determine liquiritin and glycyrrhizin in the Glycyrrhizae Radix. Liquiritin and glycyrrhizin in Glycyrrhizae Radix were ionized by positive ion pneumatically assisted electrospray and detected by HPLC-MS/MS in the multiple-reaction monitoring (MRM) mode using precursor ${\rightarrow}$ product ion combinations at m/z $436.2{\rightarrow}257.0$ and $823.4{\rightarrow}453.4$, respectively. The assay had a calibration range from 10 to 3,000 ng/mL. The limits of detection (LOD) of the liquiritin and glycyrrhizin were 0.4 ng/mL and 0.01 ng/mL, respectively. The reproducibility and repeatability (relative standard deviation) at different analyte concentrations varied from 103 to 113 % and 0.95 to 1.8 %, respectively. According to the above results, HPLC-MS/MS method permits assignment of tentative structures such as liquiritin and glycyrrhizin in the Glycyrrhizae Radix.

• The Mathematical Education
• /
• v.61 no.2
• /
• pp.257-271
• /
• 2022

As information and communication technologies are being developed so rapidly, education research is actively conducted to provide optimal learning for each student using big data and artificial intelligence technology. In this study, using the mathematics learning data of elementary school 5th to 6th graders conducting blended mathematics classes, we tried to find out what factors predict mathematics academic achievement and developed an artificial intelligence model that predicts mathematics academic performance using the results. Math learning propensity, LMS data, and evaluation results of 205 elementary school students had analyzed with a random forest model. Confidence, anxiety, interest, self-management, and confidence in math learning strategy were included as mathematics learning disposition. The progress rate, number of learning times, and learning time of the e-learning site were collected as LMS data. For evaluation data, results of diagnostic test and unit test were used. As a result of the analysis it was found that the mathematics learning strategy was the most important factor in predicting low-achieving students among mathematics learning propensities. The LMS training data had a negligible effect on the prediction. This study suggests that an AI model can predict low-achieving students with learning data generated in a blended math class. In addition, it is expected that the results of the analysis will provide specific information for teachers to evaluate and give feedback to students.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.3-12
• /
• 2022

In general construction project planning ratio of manpower and quantity of outputs produced, such as the construction estimate standard, is used as the criterion for labor productivity. This method is highly effective in construction projects with repetitive work, however, there is a limit to apply in large-scale projects with high complexity. This is because the influence of non-work time caused by various work interruption factors that act complexly on the productivity of the project is greater than the average labor productivity derived from the performance data of the project. Therefore, this study proposes a productivity measurement method that can evaluate the characteristics of construction works and the cause of non-working time. To this end, first, detailed work processes and their non-work factors for each work type are defined, and the Adv-FMR technique is developed for quantitatively measuring them. Next, based on the concept of obtainable productivity, methods for comparative productivity analysis by work type, evaluating non-work factors, and deriving productivity improvement methods are proposed. Finally, a case study is conducted to validate that the analysis results based on Adv-FMR data can support the decision-making of construction managers on productivity management.

• Journal of Navigation and Port Research
• /
• v.47 no.3
• /
• pp.120-127
• /
• 2023

Maritime pilots are always exposed to unpredictable risks present in the marine environment because they are boarding ships through pilot ladders or accommodation ladders at sea. Since the pilot plays an important role in securing the safety of a ship entering or departing from a port, an injury to the pilot substantially affects the overall safety of the ship. The purpose of this study is to analyze pilot injuries and predict accidents. For this purpose, pilot injury cases are analyzed and potential situations are identified through a survey. Pilot injuries are also predicted. The survey was analyzed using the IPA (Importance-Performance Analysis) methodology, and the binomial distribution and Poisson distribution were used to predict injury trends. As a result of the study, 316.8 nearmiss occurred per pilot injury, and if the current accident management system is maintained, the probability of pilot injury occurring within 3 months is 64.4%. Based on the research results, the need for a management system to prevent pilot injuries and reinforcement of maintenance and installation for pilot ladders was suggested.

• Smart Media Journal
• /
• v.12 no.5
• /
• pp.36-45
• /
• 2023

Recently, in digital agriculture, the types and utilization of greenhouses based on IoT are spreading, and greenhouses are being modernized, enlarged, and even factoryized using smart technology. However, a specific standardization plan has not been proposed according to the equipment for data collection in the smart greenhouse and the size or shape of the greenhouse. In other words, there is a lack of standard data for facility equipment, such as the type and number of sensors and equipment according to the size of the greenhouse, the type of greenhouse construction film and materials suitable for crops and carbon neutrality. Therefore, in this study, the suitability of the implementation, installation and quantity of IoT equipment for data collection was tested, and some standard technologies were presented through the implementation of data collection and communication methods. In addition, impact strength, tensile, tear, elongation, light transmittance, and lifespan issues for PE, PVC, and EVA, which account for about 90% of existing greenhouses, were presented, and the shape, size, and environmental problems of greenhouses made of films were presented. presented in the text. In this research paper, a standardized carbon-neutral modular smart greenhouse using nano-material film was implemented as a solution to environmental problems such as greenhouse size, farm crop type, greenhouse lifespan, and film, and its performance with existing greenhouses was analyzed and presented. Through this, we propose a modularized greenhouse that can be expanded or reduced freely without distinction in the size of the greenhouse or the shape of farmhouse crops, and the lifespan is extended and standardized. Finally, the average characteristics of greenhouses using existing PE, PVC, and EVA films and the characteristics of greenhouses using new carbon-neutral nanomaterials are compared and reviewed, and a plan to implement an expandable IoT greenhouse that supports carbon neutrality is proposed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.4
• /
• pp.307-315
• /
• 2023

Korea controls the departure of vessels based on the Maritime Safety Act such that only ships with seaworthiness can navigate in bad weather, but scientific evaluation results and quantitative basis for the designation of ships subject to control are insufficient. Opinions for improvement are being raised for a reasonable departure control operation. The purpose of this study is to evaluate the adequacy of the current departure control standards through actual measurement of tugboats, which are the type of vessels subject to control when a wind and wave advisory is effective, and to present quantitative grounds for improvement of controls. A sensor was installed on the tugboat to measure the ship's three-axis motion and hull acceleration, and the hull motion performance was measured by operating in the sea area with a significant wave height of 3 m. The measured values were compared and analyzed based on seaworthiness evaluation factors and limit value standards. The actual ship was excluded from the current control standard according to tonnage, but as a result of the analysis, the pitch value exceeded the operation standard, and a risk to navigation safety existed. The results of this study suggest the need for additional actual measurement studies that can represent various ship types and specifications and review ship departure control targets.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.108-109
• /
• 2022

In this study analyzed experimental data on noise interference caused by engine operating apply surface wave communication in the engine room. For the experiment, 7 areas of the engine room on 256 ton tug boat and measured noise during engine on off using signal analyzer for effect surface wave communication. In order to construct and actual communication network based on the analysis of the noise and confirm the characteristics of surface wave communication in the area made metal bulkheads the actual communication network installed communication equipment between three metal bulkheads and conducted a comparative experiment with wireless communication. The difference was confirmed. As a result, in the case of surface wave communication, there was no significant difference in the transmission and reception rates before and after engine operation in an environment with three bulkheads, but in the case of Wi-Fi using wireless, the performance deteriorated significantly during operation. was confirmed. As a result of analyzing the experimental data, it was confirmed that noise caused by engine operation affects wireless communication but does not affect surface wave communication. Therefore, even in the area with a lot of electromagnetic wave noise in the ship, when the surface wave communication system is configured using the ship's metal structure, it is possible to replace the wireless communication and furthermore, it is possible to apply the surface wave communication in the enclosed space and the engine room in the ship.

• Asia Marketing Journal
• /
• v.13 no.3
• /
• pp.233-248
• /
• 2011

This case illustrates a story of passionate and innovative new market development by Pulmuone, a fresh food provider in Korea. The company has been successfully developing a new market by introducing a (non-frying) fresh ramen, 'Jayeonun Masitda - The Nature Is Tasty' in the packaged ramen market dominated by fried ones. In this case, a detailed new market development process by Pulmuone will be investigated including; company overview, a new product development process, marketing strategy formulation, marketing mix implementation, market performance, and future directions. Pulmuone has been making efforts to create a new product category by marketing non-frying ramens since 1995, but with a modest success. In 2011, Pulmuone finally succeeded to develop an innovative product, 'Jayeonun Masitda' that brought more health and nutrition conscious consumers' attention in the ramen market. The company intended to change the current competitive structure in the ramen market, i.e., from the strength of taste and the amount of ingredient to fried/non-fried and the freshness of ingredient. By this new positioning, Pulmuone aimed to reshaping the ramen market into competition between healthy and unhealthy ramens. Pulmuone has been successful in developing a new market. Sales revenue of 'Jayeonun Masitda' has been continuously increasing, and customers are found to be highly satisfied with the product resulting in a high repeat purchase rate. The company's successful new market development can be attributed to a faithful new product development process, innovative technology, an appropriate positioning strategy, and consistent marketing communication. In addition, Pulmuone's eco-friendly corporate image and the organization's passion to grow are also important factors for success of this new market development.

• Asia Marketing Journal
• /
• v.6 no.3
• /
• pp.59-81
• /
• 2004

Store loyalty is increasingly being recognized as a path to long-term business profitability. Customer contact employees deliver a service firm's promises and create an important image for the firm. A major purpose of this study is to investigate the effects of customer service and product value on store loyalty. In order to test research hypotheses, data were collected through surveys administered to 300 apparel store customers. Two hundred thirty nine usable data were used for the analysis. The findings of this research are as follows: First, a employee's voluntary service(EVS) has a positive impact on interpersonal r elationship, which then affects switching barrier and store loyalty. Second, a employee's regular service(ERS) has an influence on store satisfaction, which in turn affect store loyalty. Third, product value is shown to be a significant antecedent to store satisfaction, which have a direct effect on store loyalty. The study concludes with implications, contributions, and limitations of the research and the empirical findings of this research should be beneficial to marketing practitioners and retailing businessmen in developing effective marketing strategies.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.19 no.1
• /
• pp.39-49
• /
• 2017

The present study conducted a comparison on tree growth and productivity of high-density apple orchards by several orchard management systems: making scaffolds by heading-back and thinning out pruning (T-1), maintaining scaffolds upward and bearing shoots downward (T-2), managing branches slightly upward without heading-back (T-3), keeping leaders downward and shoots pending (T-4), maintaining leaders high and branches horizontal with severe pinching (T-5), making leaders with lower branches vigorous and upper shoots pending (T-6), and controlling very high planting density with bending branches (T-7). In conclusion, the orchards of (T-5) and (T-6) management systems showed a superior performance in controlling tree growth, productivity, and quality of fruits. Also, superior management efficiency was obtained in the orchards of (T-5) and (T-6).