• 한국환경복원기술학회지
• /
• 제6권6호
• /
• pp.41-48
• /
• 2003

Nitrogen removal rate and emergent plant growth were investigated of a free-water-surface constructed treatment wetland system, whose dimensions were 31m in length and 12m in width. The system was constructed on floodplain in the Kwangju Stream from May to June 2001. Cattails(Typha angustifolia) were transplanted from natural wetlands and their stems were cut at about 40cm height from their bottom ends. Water of the Kwangju Stream were funneled into the system by gravity flow and its treated effluent was discharged back into the stream. The average height of the cattail stems was 45.2cm in July 2001 and 186cm in October 2001. The number of stems averaged 22 stems/$m^2$ in July 2001 and 52 stems/$m^2$ in September 2001. Volume and water quality of inflow and outflow were analyzed from July 2001 through December 2001. Inflow and outflow averaged 40.01 and 39.55 $m^3$/day, respectively. Hydraulic detention time was about 1.5 days. Average nitrogen uptake by cattails was 69.31 $N\;mg\;m^{-2}\;day^{-1}$. Removal rate of $NO_3-N$, $NH_3-N$ and T-N averaged 195.58, 53.65 and 628.44 $mg\;m^{-2}\;day^{-1}$, respectively. The average removal rate of T-N was about 39%.

• 동력기계공학회지
• /
• 제18권1호
• /
• pp.63-68
• /
• 2014

The numerical analysis of fluid flow in the tube cleaning system is examined. The working flow used in this study is seawater, and the temperature change is not considered as the temperature change of seawater in the tube cleaning system is negligible. Also, the analysis is performed under the assumption of steady state. The screens of complicated morphologies are simplified for the analysis, and only one fourth of the tube cleaning system is modeled as the system has a symmetrical shape. The velocity inlet boundary condition is employed for the seawater inlet, whereas the outflow boundary condition is employed for two seawater outlets. In applying the outflow boundary condition for the system with more than two outlets, the flow rate can be arbitrarily assigned. In the analysis, the finite-volume method based numerical analysis tool, the pressure based solver, the standard k-$\varepsilon$ model are utilized, and the under relaxation factor is modified appropriately. From the analysis, the distribution of velocity vectors, pressure and path lines are obtained, and the physical characteristics of fluid flow in the tube cleaning system is well-examined.

• 한국물환경학회지
• /
• 제36권1호
• /
• pp.29-35
• /
• 2020

To manage the non-point source pollution and restore the water circulation, many technologies including infiltration or reservoir systems were installed in the urban area. These facilities have many problems regarding maintenance as their operation period becomes lengthier. The purpose of this study was to estimate the optimal maintenance timing through a long-term load test on the infiltration trench as one of the low impact development techniques. An infiltration trench was installed in the demonstration test facility, and stormwater was manufactured by Manual on installation and operation of non-point pollution management facilities from the Ministry of Environment, Korea and entered into the infiltration trench. Particle size distribution (PSD), suspended solids (SS) removal efficiency, and infiltration rate change tests were performed on inflow and outflow water. In case of the PSD, the maximum particulate size in the outflow decreased from 64 ㎛ to 33 ㎛ as the operating duration elapsed. The SS removal efficiency improved from 97 % to 99 %. The infiltration rate changed from 0.113 L/sec to 0.015 L/sec during the operation duration. The maintenance timing was determined based on the stormwater runoff requirements with these changes in water quality and infiltration rate. The methodologies in this study could be used to estimate the timing of maintenance of other low impact development techniques.

• 한국축산식품학회지
• /
• 제43권6호
• /
• pp.1128-1149
• /
• 2023

In order to extend the shelf life of refrigerating raw lamb by inhibiting the growth of microorganisms, preventing the oxidation of fat and protein, and absorbing the juice outflow of lamb during storage, an active packaging system based on plastic/gelatin bilayer film with essential oil was developed in this study. Three kinds of petroleum-derived plastic films, oriented polypropylene (OPP), polyethylene terephthalate, and polyethylene, were coated with gelatin to make bilayer films for lamb preservation. The results showed significant improvement in the mechanical properties, oxygen, moisture, and light barriers of the bilayer films compared to the gelatin film. The OPP/gelatin bilayer film was selected for further experiments because of its highest acceptance by panelists. If the amount of juice outflow was less than 350% of the mass of the gelatin layer, it was difficult for the gelatin film to separate from lamb. With the increase in essential oil concentration, the water absorption capacity decreased. The OPP/gelatin bilayer films with 20% mustard or 10% oregano essential oils inhibited the growth of bacteria in lamb and displayed better mechanical properties. Essential oil decreased the brightness and light transmittance of the bilayer films and made the film yellow. In conclusion, our results suggested that the active packaging system based on OPP/gelatin bilayer film was more suitable for raw lamb preservation than single-layer gelatin film or petroleum-derived plastic film, but need further study, including minimizing the amount of essential oil, enhancing the mechanical strength of the gelatin film after water absorption.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1444-1449
• /
• 2006

우리나라는 전 국토의 70%가 산지로 되어 있고, 토지를 집약적으로 이용하므로 유역이 다양한 지형, 토양, 식생, 토지이용 등으로 구성되어 있다. 또한 이수 계획을 수립하기 위한 유출량의 계산을 위해서는 직접유출 뿐만 아니라 기저유출까지 재현할 수 있는 유역수문모형이 필요하다. 이에 따라 유역내 수문인자의 정량적.정성적 분석을 위해서는 유역출구에서 뿐만 아니라 유역전체에 대한 수문인자를 평가할 수 있는 분포형 모형이 요구되고 있으며, 효율적인 수자원관리 및 개발 계획수립을 위한 물리기반 수문모형의 개발 및 적용 요구가 증대되고 있다. 우리 공사도 유역조사에서 PRMS 모형에 의한 물수지 분석을 수행하고 있는 등 이수분야에 물리기반 모형의 적용이 증가하고 있는 실정이다. 기존 USGS WEASEL은 PC Arc/Info 기반에서 구동하는 방식으로 사용방법 및 사용자 인터페이스 제공 측면에 있어 불편함이 초래하고 있으며, 현재 GIS 기술의 발달과 함께 ESRI ArcGIS9.1이 개발되어 GIS를 이용한 분석에 있어 편리성을 제공하여 많은 분야에 적용되고 있다. 이에 따라, 본 연구에서는 편리한 모델링 환경 제공을 신기술 적용 및 국내 자연환경에 적합한 유출매개변수 도출 시스템 개발을 위하여 선진 사례 벤치마킹을 통한 수자원 DB로부터 물리기반 수문모형 입력 자료를 효과적으로 추출하는 전 후처리기를 개발하고, 다양한 수문 수질모형에 적용할 수 있는 GIS 기반의 입출력 컴포넌트를 개발하였다.

• Wind and Structures
• /
• 제38권2호
• /
• pp.129-146
• /
• 2024

Aiming at the problem of non-stationary wind field simulation of downbursts, a non-stationary down-burst generation system was designed by adding a nozzle and program control valve to the inlet of the original wall jet model. The computational fluid dynamics (CFD) method was used to simulate the downburst. Firstly, the two-dimensional (2D) model was used to study the outflow situation, and the database of working conditions was formed. Then the combined superposition of working conditions was carried out to simulate the full-scale measured downburst. The three-dimensional (3D) large eddy simulation (LES) was used for further verification based on this superposition condition. Finally, the wind tunnel test is used to further verify. The results show that after the valve is opened, the wind ve-locity at low altitude increases rapidly, then stays stable, and the wind velocity at each point fluctuates. The velocity of the 2D model matches the wind velocity trend of the measured downburst well. The 3D model matches the measured downburst flow in terms of wind velocity and pulsation characteris-tics. The time-varying mean wind velocity of the wind tunnel test is in better agreement with the meas-ured time-varying mean wind velocity of the downburst. The power spectrum of fluctuating wind ve-locity at different vertical heights for the test condition also agrees well with the von Karman spectrum, and conforms to the "-5/3" law. The vertical profile of the maximum time-varying average wind veloci-ty obtained from the test shows the basic characteristics of the typical wind profile of the downburst. The effectiveness of the downburst generation system is verified.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1201-1204
• /
• 2005

Whereas conveniences deriving from the development of information and telecommunication technology increase, information outflow and illegal data use are also rapidly on the rise. Consequently, many studies to prevent illegal information outflow are currently under way, and the use of Smart Card is in steep jump. Recently, Java Card is diffused fast as an alternative to complement the technical problems of the Smart Card. This paper designed and materialized the system for multi-users authentication and file access control by user through designing a Java Card applet that is used for information protection and in various application fields. For allowing a file access competence, each user's file access competence is processed via drawing up the access condition table in the applet. Therefore, illegal correction, exposure and destruction of information, which become the concerns when multi-users have an access, can be prevented. In addition, its application becomes possible in the system requiring multi-users certifications.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.213-216
• /
• 2013

인터넷의 발달과 유무선 네트워크 인프라 기술의 발전으로 빅테이터 및 개인정보보의 활용이 많아지고 있다. 하지만 개인정보보호법의 시행에도 불구하고, 개인정보 유출로 인한 침해사고가 발생하고 있다. 개인정보 유출은 개인의 사생활피해와 금융피해로 연관된다. 따라서 개인정보의 탐색 및 검출과정에서 개인정보의 패턴을 분석하여 추출하는 연구와 불필요한 개인정보의 완전삭제에 관한 연구가 필요하다. 본 연구에서는 개인정보보호에 대한 패턴추출 연구와 완전삭제 방법을 연구하여 개인정보의 패턴추출 및 완전삭제 실험을 하였다.

• 한국해양공학회지
• /
• 제22권2호
• /
• pp.34-41
• /
• 2008

As a basic study for developing a forecasting/estimating system that predicts water quality changes when Deep Sea Water (DSW) drains to the ocean after using it, this study was carried out as follows: 1) numerical simulation of the present state at DSW developing region in the East sea using SWEM, 2) numerical prediction of water quality changes by effluent DSW, 3) analysis of influence degree 'With defined DEI (DSW effect index) at F station. On the whole, when DSW drained to the ocean, Chl-a, COD and water-temperature were decreased and DIN, DIP and DO were increased by effluent DSW, and Salinity was steady. According to analysis of influence degree, the influence degree of DIN was the highest and it was high in order of Chl-a, COD, Water-temperature, DO, DIP and Salinity. The influence degree classified by DSW effluent position was predicted that suiface outflow was lower than bottom outflow. Ad When DSW discharge increased 10 times, the influence degree increased about $5{\sim}14$ times.

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1173-1183
• /
• 2018

Transient fluid velocity and pressure fields in a pressurized water reactor (PWR) steam generator (SG) secondary side during the blowdown period of a feedwater line break (FWLB) accident were numerically simulated employing the saturated water flashing model. This model is based on the assumption that compressed water in the SG is saturated at the beginning and decompresses into the two-phase region where saturated vapor forms, creating a mixture of steam bubbles in water by bulk boiling. The numerical calculations were performed for two cases of which the outflow boundary conditions are different from each other; one is specified as the direct blowdown discharge to the atmosphere and the other is specified as the blowdown discharge to an extended calculation domain with atmospheric pressure on its boundary. The present simulation results obtained using the two different outflow boundary conditions were discussed through a comparison with the predictions using a simple non-flashing model neglecting the effects of phase change. In addition, the applicability of each of the non-flashing water discharge and saturated water flashing models for the confirmatory assessments of new SG designs was examined.