• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.35-45
• /
• 2018

Image data collected by an airborne hyperspectral camera system have a great usability in coastal line mapping, detection of facilities composed of specific materials, detailed land use analysis, change monitoring and so forh in a complex coastal area because the system provides almost complete spectral and spatial information for each image pixel of tens to hundreds of spectral bands. A few approaches after classifying by a few approaches based on SAM(Spectral Angle Mapper) supervised classification were applied for extracting optimal land cover information from hyperspectral images acquired by CASI-1500 airborne hyperspectral camera on the object of a coastal area which includes both land and sea water areas. We applied three different approaches, that is to say firstly the classification approach of combined land and sea areas, secondly the reclassification approach after decompostion of land and sea areas from classification result of combined land and sea areas, and thirdly the land area-only classification approach using atmospheric correction images and compared classification results and accuracies. Land cover classification was conducted respectively by selecting not only four band images with the same wavelength range as IKONOS, QuickBird, KOMPSAT and GeoEye satelllite images but also eight band images with the same wavelength range as WorldView-2 from 48 band hyperspectral images and then compared with the classification result conducted with all of 48 band images. As a result, the reclassification approach after decompostion of land and sea areas from classification result of combined land and sea areas is more effective than classification approach of combined land and sea areas. It is showed the bigger the number of bands, the higher accuracy and reliability in the reclassification approach referred above. The results of higher spectral resolution showed asphalt or concrete roads was able to be classified more accurately.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.343-349
• /
• 2012

Exposure and risk assessments were conducted to evaluate the relative safety of mixing/loading work of indoxacarb between wettable powder (WP) and water dispersible granule (WG). Hand exposure was monitored using cotton gloves while inhalation exposure was measured using personal air monitor. Method validation for the exposure monitoring was established successfully through several experiments. Limit of determination and limit of quantitation were 0.25 and 1 ng, respectively. $R^2$ of calibration curve linearity was more than 0.9999 and reproducibility was 0.7-6. Recovery of indoxacarb from gloves, solid sorbent and glass fiber filter at three different levels was 81.5-108.8%. Trapping efficiency and breakthrough tests gave 981.5-108.8% of recovery. During mixing/loading procedure, hand exposure amount (75 percentile of 30 repetitions) for indoxacarb WP was 6 folds (459.8 mg/kg a.i) than that of WG (81.4 mg/kg a.i). This result indicates that WG has less drift than WP thanks to its granular type of formulation. Inhalation amount was $10^{-8}-10^{-7}%$ of spray mixture prepared and $10^{-4}-10^{-3}%$ of hand exposure. In inhalation case, no significant differences were observed between two formulations. Margin of safety was calculated for risk assessment using male Korean average body weight and acceptable operator exposure level as the important exposure factors. Mixing/loading procedures for both of the formulations were considered to be of least risk because calculated MOS values were more than 1.

• Korean Journal of Food Science and Technology
• /
• v.42 no.4
• /
• pp.494-501
• /
• 2010

The purpose of this study was to examine the presence of Bacillus cereus, aerobic bacteria and coliforms in the raw material of infant formulas and investigate the manufacturing process in terms of microbial safety. Among ten kinds of raw infant formula material samples (n=20), Bacillus cereus appeared in two (n=4). Aerobic bacteria were not detected in raw infant formula material or maximum 4.15 log CFU/g. Eleven species of aerobic bacteria were isolated and 76% of them were Sphingomonas paucimobilis, Pseudomonas fluorescens, Rhizobium radiobactor, or Stenotrophomonas maltophilia. A Pearson's correlation analysis revealed that the most influential factors for detecting Bacillus cereus were aerobic bacteria and coliforms. In other words, when the measured values of aerobic bacteria and coliforms were higher, the possibility that Bacillus cereus would appear increased. In a regression model to predict Bacillus cereus, the rate of appearance was correlated with aerobic bacteria and coliforms, and its contribution rate for effectiveness was 86%. Improving microbial quality control by pasteurization, spray dry, popping and extrusion resulted in a decrease in the numbers of Bacillus cereus, aerobic bacteria and coliforms in the raw materials. The results suggest that a hazard analysis and critical control point system might be effective for reducing microbiological contamination.

• Korean Journal of Food Science and Technology
• /
• v.41 no.3
• /
• pp.238-244
• /
• 2009

This survey was conducted as a surveillance program following the establishment of safety guidelines for agricultural products in Korea. Concentrations of arsenic (As), cadmium (Cd), lead (Pb), and mercury (Hg) were measured in 421 samples using a mercury analyzer or ICP-MS. The average levels of Pb in mg/kg were 0.021 for rice, 0.020 for corn, 0.028 for soybeans, 0.034 for red beans, 0.025 for sweet potatoes, 0.021 for potatoes, 0.019 for Chinese cabbage, 0.031 for spinach, 0.021 for Welsh onions, and 0.011 for radishes. The average levels of Cd in mg/kg were 0.021 for rice, 0.002 for corn, 0.020 for soybeans, 0.006 for red beans, 0.008 for sweet potatoes, 0.011 for potatoes, 0.007 for Chinese cabbage, 0.035 for spinach, 0.006 for Welsh onions, and, 0.006 for radishes. The average levels of As in mg/kg were 0.103 for rice, 0.005 for corn, 0.007 for soybeans, 0.005 for red beans, 0.005 for sweet potatoes, 0.004 for potatoes, 0.007 for Chinese cabbage, 0.015 for spinach, 0.009 for Welsh onions and, 0.006 for radishes. Finally, the average levels of Hg in ${\mu}g/kg$ were 2.3 for rice, 0.2 for corn, 0.6 for soybeans, 1.4 for red beans, 0.1 for sweet potatoes, 0.3 for potatoes, 0.5 Chinese cabbage, 2.1 for spinach, 0.5 for Welsh onions, and 0.2 for radishes. Based on the Korean public nutrition report 2005, these levels (or amounts) are calculated only at 2.6% for Pb, 8.7% for Cd, 1.2% for Hg of those presented in provisional tolerable weekly intake (PTWI) which has been established by FAO/WHO. Therefore, the levels presented here are presumed to be adequately safe.

• Korean Journal of Food Science and Technology
• /
• v.45 no.3
• /
• pp.376-381
• /
• 2013

In this study, we monitored total mercury and methylmercury concentrations in tuna, billfish, and deep-sea fish distributed in Seoul city. With the acquired data, we carried out statistical analysis and an exposure assessment for intake. The mean concentrations (mg/kg) of total mercury and methylmercury were $0.32{\pm}0.31/0.20{\pm}0.20$ for tuna, $0.43{\pm}0.48/0.20{\pm}0.17$ for patagonian toothfish, $0.99{\pm}0.72/0.51{\pm}0.40$ for billfish and $1.20{\pm}0.70/0.95{\pm}0.51$ for sharks, respectively. We found that sharks, billfish, patagonian toothfish, and tuna were more contaminated with total mercury and methylmercury, in sequence, and that 66% of the total mercury concentration consisted of methylmercury, on average. Although the estimated weekly intakes of methylmercury from commercial deep-sea fish were lower than the weekly intakes recommended by the Joint FAO/WHO Expert Committee on Food Additives (JECFA), we identified that the total mercury and methylmercury concentrations in tuna, billfish, and deep-sea fish continued to increase with the passage of time. Therefore, we confirmed the necessity of continuous monitoring and comprehensive analysis for general safety.

• Journal of Mushroom
• /
• v.17 no.4
• /
• pp.211-217
• /
• 2019

Currently, cultivation of mushrooms using the Information and Communication Technology (ICT)-based smart farming technique is increasing rapidly. The main environmental factors for growth of mushrooms are temperature, humidity, carbon dioxide (CO₂), and light. Among all the mentioned factors, currently, only temperature has been maintained under automatic control. However, humidity and ventilation are controlled using a timer, based on technical experience.Therefore, in this study, a Pleurotus eryngii first-generation smart farm model was set up that can automatically control temperature, humidity, and ventilation. After installing the environmental control system and the monitoring device, the environmental condition of the mushroom cultivation room and the growth of the fruiting bodies were studied. The data thus obtained was compared to that obtained using the conventional cultivation method.In farm A, the temperature during the primordia formation stage was about 17℃, and was maintained at approximately 16℃ during the fruiting stage. The humidity was initially maintained at 95%, and the farm was not humidified after the primordia formation stage. There was no sensor for CO₂ management, and the system was ventilated as required by observing the shape of the pileus and the stipe. It was observed that, the concentration of CO₂ was between 700 and 2,500 ppm during the growth period. The average weight of the mushrooms produced in farm A was 125 g, and the quality was between that of the premium and the first grade.In farm B. The CO₂ sensor was in use for measurement purposes only; the system was ventilated as required by observing the shape of the pileus and the stipe. During the growth period, the CO₂ concentration was observed to be between 640 and 4,500 ppm. The average weight of the mushrooms produced in farm B was 102 g.These results indicate that the quality of the king oyster mushroom is determined by the environmental conditions, especially by the concentration of CO₂. Thus, the data obtained in this study can be used as an optimal smart farm model, where, by improving the environmental control method of farm A, better quality mushrooms were obtained.

• Korean Journal of Food Science and Technology
• /
• v.44 no.2
• /
• pp.148-154
• /
• 2012

It was carried out to detect anti-impotence drug-like compounds, sibutramine and their analogues in dietary supplements, which are doubtful whether they include illegal compounds. A total of 51 food products were bought online and have been investigated. The separation was achieved on a C18 column, with the mobile phase made up of water (5 mM sodium hexanesulfonate and 0.1% phosphoric acid) and 95% acetonitrile, at a flow rate of 1.2 mL/min with gradient elution using by HPLC-DAD. The UV signals were monitored at 220 nm and 291 nm. LC-ESI-tandom MS was utilized to confirm that detected compounds in samples are the same as the reference materials. Two nutrient supplement foods and ginseng products were found to contain 1.3-82.1 mg of sildenafil, dimethylthiolsildenafil and pseudovardenafil per serving size. In addition, two other processed products were detected to contain 1.7 and 2.2 mg of didesmethylsibutramine, derived from sibutramine per serving size.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.27-32
• /
• 2010

This study was conducted to monitor aflatoxins in various medicinal herbs, providing available data for the safety of those products. To monitor aflatoxins in medicinal herbs, a total of 400 samples of 40 different herbs were collected in commercial retailers in Seoul, Daejeon, Gwangju, Daegu, and Busan from March to August, 2008. The samples that passed the sensory evaluation were tested for aflatoxins. Aflatoxins in samples were analyzed by HPLC-florescence coupled with photochemical enhancement. Samples were extracted with 70% methanol and then diluted to the appropriate concentration. A refining process was performed using an immunoaffinity column. The analytical method used in this study was validated. The $R^2$ value for aflatoxin $B_1$ was 0.99946, and the detection range was from 0.25 to 10.0 ng/mL. The accuracy of the analysis was ranged from 83.2% to 101.8%. The relative standard deviation (RSD) in the aflatoxin $B_1$ analysis was 3.4%, demonstrating the precision of this method. In addition, the detection limit and quantitative analysis limit of aflatoxin $B_1$ was $0.53\;{\mu}g/kg$ and $1.76\;{\mu}g/kg$, respectively. These results indicated that the analytical method used in this study was appropriate. The results of HPLC showed that 1% (4 samples) of the samples may contain aflatoxins. The concentration of quantified aflatoxin was $2.3\;{\mu}g/kg$ for both Quisqualis fructus and Remotiflori radix samples. The other samples were below the limit of quantification. Moreover, the concentration of aflatoxin $B_1$ which is made by specific fungi were below the level of regulation. Only 20% of aflatoxin $B_1$ were transferred to hot water. Therefore, the levels of aflatoxins in medicinal herbs were considered to be safe especially considering the aflatoxin transfer ratio.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.391-402
• /
• 2013

Pesticide residues in agricultural products in Korea were evaluated to create a data base to inform food policy. Pesticide residues were investigated in 17 commodities collected from 9 provinces in 2012. Our analytical method of multiresidue analysis, involved the analysis of individual recovery, linearity, limit of detection, and limit of quantitation of 60 pesticides in six matrices. The pesticides, including acetamiprid and forchlorofenuron, were evaluated in 358 agricultural samples by liquid chromatography/tandem mass spectrometry. Twenty three pesticides were detected from 67 samples. The results showed that the ratio of estimated daily intake to acceptable daily intake was 0.00009-0.0861% by the intake assessment, which means that residual pesticides in agricultural products in Korea are properly controlled.

• Korean Journal of Food Science and Technology
• /
• v.40 no.1
• /
• pp.8-14
• /
• 2008

This study was performed to establish analysis methods, and evaluated for grayanotoxin in domestic/foreign honey and wild honey. The molecular weight of grayanotoxins I, II and III, excluding grayanotoxin III that has been commercialized, were analyzed by LC-MS/MS. Then, the molecular structure of grayanotoxins I and II were analyzed by NMR. A total 111 samples (25 Korean honey, 21 Korean wild honey, 13 Korean honeycomb honey, 44 foreign honey, 8 foreign wild honey) were examined to determined whether or not each sample contained grayanotoxins I, II, and III. The honey samples were mixed with methanol and loaded into a tC18 cartridge, the filtrate was diluted with water, and the mixture was then analyzed by ESI triple-quadrupole LC-MS/MS. Grayanotoxins were only found in the foreign wild honey and were not detected in Korean honey, Korean honeycomb honey, or Korean wild honey. Three of the samples contained grayanotoxin I, II, and III, and one sample contained only grayanotoxins I and III. The lowest level for grayanotoxin I was 3.13 ${\pm}$ 0.00 mg/kg, and the highest level was 12.93 ${\pm}$ 0.01 mg/kg. The levels of grayanotoxin II were 0.84 ${\pm}$ 0.01 mg/kg, 0.92 ${\pm}$ 0.00 mg/kg and 1.08 ${\pm}$ 0.01 mg/kg, respectively. The lowest level of grayanotoxin III was 0.25 ${\pm}$ 0.01 mg/kg and the highest level was 3.29 ${\pm}$ 0.74 mg/kg. Through this study, safety management for foreign wild honey has been enabled.