• Nuclear Engineering and Technology
• /
• v.44 no.4
• /
• pp.421-428
• /
• 2012

Analog instrument and control systems in nuclear power plants have recently been replaced with digital systems for safer and more efficient operation. Digital instrument and control systems have adopted various fault-tolerant techniques that help the system correctly and safely perform the specific required functions regardless of the presence of faults. Each fault-tolerant technique has a different inspection period, from real-time monitoring to monthly testing. The range covered by each faulttolerant technique is also different. The digital instrument and control system, therefore, adopts multiple barriers consisting of various fault-tolerant techniques to increase the total fault detection coverage. Even though these fault-tolerant techniques are adopted to ensure and improve the safety of a system, their effects on the system safety have not yet been properly considered in most probabilistic safety analysis models. Therefore, it is necessary to develop an evaluation method that can describe these features of digital instrument and control systems. Several issues must be considered in the fault coverage estimation of a digital instrument and control system, and two of these are addressed in this work. The first is to quantify the fault coverage of each fault-tolerant technique implemented in the system, and the second is to exclude the duplicated effect of fault-tolerant techniques implemented simultaneously at each level of the system's hierarchy, as a fault occurring in a system might be detected by one or more fault-tolerant techniques. For this work, a fault injection experiment was used to obtain the exact relations between faults and multiple barriers of faulttolerant techniques. This experiment was applied to a bistable processor of a reactor protection system.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.1
• /
• pp.47-52
• /
• 2007

The investigation of the textural characteristics of sponge cake with addition of polymannuronate(obtained from the polysaccharide, component of brown seaweed), were studied in order to assess the potential of polymannuronate as a dietary fiber and fat substitute. Hardness, gumminess, and chewiness of sponge cake were tended to progressively decrease in the response to the addition of polymannuronate. Low-butter treatment with constant level of polymannuronate increased hardness, gumminess, and chewiness while brittleness and springiness decreased. Sensory evaluation of sponge cake indicated that addition of polymannuronate(optimally at 3 and 5 w/w%), enhanced springiness, cohesiveness, and overall acceptability. The overall acceptability decreased P5C, P3C and P1C, P5B and control in the order. These results highlight the potential of polymannuronate as promising dietary fiber and fat substitute in sponge cake without compromising the textural characteristics.

• Korean Journal of Medicinal Crop Science
• /
• v.18 no.1
• /
• pp.9-14
• /
• 2010

Several presowing seed treatments have been used to facilitate the seed germination and seedling emergence. The study was performed to design a model of presowing seed treatments in Taraxacum platycarpum. Germination and seedling growth responses to temperature, drying, chilling, $GA_3$ and priming were investigated to know the optimum germination conditions and presowing treatment. The optimum temperature condition for germination and seedling growth were $15{\sim}20^{\circ}C$ at dark condition. The seeds exposed to infra red light, however, did not germinate. The moisture content of seeds dried at $35^{\circ}C$ for 3.5 hours was returned to the level of unimbibed seeds. The germination of seeds dried under dark condition was better than those dried under infra red light. Prechilling treatment imposed for 6 weeks showed higher germination rate than $GA_3$ treatment or priming. In field test, the highest field emergence was observed in the seeds dried after prechilled for 6 weeks and followed by drying followed by $GA_3$ > low temperature > $KNO_3$ priming. Imbibition with 0.1 mM $GA_3$ solution for 2 hours then drying at 35 for 3.5 hour under dark condition was effective to the practical presowing treatment for Taraxacum seeds.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.3
• /
• pp.179-189
• /
• 2000

Clebopride malate(Cm) is a new benzamide drug which has a potent central antidopaminergic activity possessing antiemetic and anxiolytic properties. A purpose of this study was to assess the feasibility of formulating sustained release preparation by dispersing a drug in hydrophilic polymeric matrices and double layered tablets(DLT), using HPMC, carbopol, PEO, PVP/VA and other polymers as a rate controlling barrier. The matrix and DLT showed optimum dissolution pattern up to 8 hours and the contents of polymer were optimized at 30% level in this preparation. After an oral administration in beagle dog, Cm concentration was determined by use of GC-ECD and pharmacokinetic parameters were calculated by Vallner's method. The AUC of DLT showed similar results and the duration of action was increased 55% compared to that of regular release dosage form. The calculated absorption rate effectiveness(ARE) and controlled release effectiveness(CRE) for DLT increased 50% compared to that of matrix, the overall effectiveness(E) of this product appears to be about 70%. in vivo effectiveness test, DLT showed significant differences from control on antiemetic action of Cm. In consequence, it was possible to conclude that double layered tablet might be a good candidate for the sustained release dosage forms.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.3
• /
• pp.219-230
• /
• 2017

This study was conducted to predict and evaluate the uncertainty of safety after closure of the second phase surface disposal facility of the Gyeongju intermediate and low level repository in Korea. In this study, four scenarios are developed considering both intact and degraded states of multi-layered covers and disposal containers; also, the fluid flow by a rainfall into the disposal facility is simulated. The rainfall conditions are implemented based on the monthly average data of the past 30 years (1985~2014); the simulation period is 300 years, the management period regulated by institutional provisions. As a result of the evaluation of the basic scenario, in which the integrity of both of the containers and the covers is maintained, it was confirmed that penetration of rainfall does not completely saturate the inside of the disposal facility. It is revealed that the multiple cover layers and concrete containers effectively play the role of barrier against the permeation of rainfall.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.6
• /
• pp.886-894
• /
• 2012

For the development of Moru wine with enhanced sensory qualities, Moru (Vitis amurensis) wines were fermented with pine needles from Pinus densiflora Siebold et Zuccarini to make Moru-pine wine or medicinal herbs from Astragali Radix and Viscum album to make Moru-herb wine. Moru without pine needles or medicinal herbs was included as a control. Pine needles and Astragali Radix/Viscum album delayed the fermentation of Moru wine, but after 40 days of fermentation and aging, final ethanol contents, pH, acidity, and the sugar/organic acid content in these kinds of Moru wines had no differences. The final ethanol level and acidity of Moru wines were 11.5~12.9% and 1.1~1.2%, respectively, but any sugars (glucose, fructose and sucrose) were not detected in all Moru wines. These results are consistent with the general characteristics of Moru wines, which have a high acidity and low sugar contents. Relatively low browness and antocyanins were detected in Moru-herb wine decreasing its chromaticity in a sensory test. Overall, the supplements of Astragali Radix/Viscum album reduced the color of normal Moru wine, which might be applied toward the development of conventional Moru wines.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.24-31
• /
• 2007

DVB-T (Digital Video Broadcasting-Terrestrial) is an important multimedia broadcasting technology capable of high data-rate transmission and adopted by Europe. OFDM (Orthogonal Frequency Division Multiplexing) is the backbone technique employed in DVB-T to support multimedia services that have various bandwidths. Unfortunately, an OFDM signal has a large PAPR (Peak-to-Average Power Ratio). In this paper, we investigate the performance of a simple PAPR reduction scheme for the DVB-T system, which requires no change of a receiver structure or no additional information transmission. The approach we employed is clipping in the time and frequency domains. The time-domain clipping is carried out with a predetermined clipping level while the frequency-domain clipping is done within EVM (Error Vector Magnitude). This approach is suboptimal with lower computational complexity compared to the optimal method. The simulation results demonstrate that the proposed one is getting more effective at lower modulation levels and with more allowed constellation error.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.339-345
• /
• 2016

This paper presents a two-stage power amplifier MMIC using a $0.4{\mu}m$ GaN-HEMT process. The two-stage structure provides high gain and compact circuit size using an integrated inter-stage matching network. The size and loss of the inter-stage matching network can be reduced by including bond wires as part of the matching network. The two-stage power amplifier MMIC was fabricated with a chip size of $2.0{\times}1.9mm^2$ and was mounted on a $4{\times}4$ QFN carrier for evaluation. Using a downlink LTE signal with a PAPR of 6.5 dB and a channel bandwidth of 10 MHz for the 2.6 GHz band, the power amplifier MMIC exhibited a gain of 30 dB, a drain efficiency of 32%, and an ACLR of -31.4 dBc at an average output power of 36 dBm. Using two power amplifier MMICs for the carrier and peaking amplifiers, a Doherty power amplifier was designed and implemented. At a 6 dB back-off output power level of 39 dBm, a gain of 24.7 dB and a drain efficiency of 43.5% were achieved.

• Journal of Technologic Dentistry
• /
• v.36 no.4
• /
• pp.239-246
• /
• 2014

Purpose: The purpose of this study was to compare the tensile strength and mechanical properties of orthodontic wire joints made by gas soldering and laser welding, with and without filling material, to identify the effectiveness and potential clinical application of laser welded orthodontic wires. Methods: Three joint configurations of orthodontic wire were used: diameter 0.9 to 0.9 mm wire, diameter 0.9 to 0.5 wire and diameter 0.9 mm wire to band. The joints were made using three different methods: gas soldering, laser welding with and without filling material. For each kind of joint configuration or connecting method 7 specimens were carefully produced. The tensile strengths were measured with a universal testing machine (Zwick/Roell, Instron, USA). The hardness measurements were carried out with a hardness tester(Future-Tech Co. Tokyo, Japan). Data were analyzed by AVOVA(p= .05) and Turkey HD test(p= .05). Results: In all cases, gas soldering joints were ruptured on a low level on tensile bonding strength. Significant differences between laser welding and gas soldering(p< .05) were found in each joint configuration. The highest tensile strength means were observed for laser welding, with filling material, of 0.9 to 0.9 mm wire joint. Conclusion: In conclusion, the elastic modulus and tensile strength means of laser soldering with filling material were the highest, and the tensile strength means of laser soldering were higher than those of gas soldering.

• Journal of Digital Contents Society
• /
• v.19 no.1
• /
• pp.75-83
• /
• 2018

Multicultural family members have difficulty in educating their children due to language differences. In order to solve these difficulties, it is necessary to provide smart translation services that enable them easily and quickly access real-life vocabularies. However, the current automatic translation technology is being developed in dominant languages such as English, Chinese, and Japanese. There are also limitations to translating special-purpose terms such as documents of schools and instructions of public institutions. In this study, we propose a real-time automatic word translation service for multicultural family members who understand beginner level Korean. The service automatically analyzes the semantics of each word in the Korean sentences and provides a word-by-word translation. This study includes semantic analysis research for Korean language, building multilingual translation knowledge, and fusion study of language education. We evaluated the word translation service for migrant women from Vietnam and Japan and obtained meaningful evaluation results.