• 보존과학연구
• /
• s.31
• /
• pp.43-57
• /
• 2010

This study intends to provide quantitative data about the extraction characteristics of major elements of earthenware by executing soaking test of cleaning agents. It aims at providing basic data for the stability assessment when applying the cleaning agents for conserving earthenware. The data will be extracted from the analysis of co-relationship between the physical characteristics and the ion extraction characteristics. XRD analysis displayed that AT-1, AT-2 and AT-3 which did not generate mullite were fired at lower than 1,000 whereas AT-3 and AT-5 that included mullite were higher than 1,000. The degree of absorption was AT-4 > AT-2 > AT-1 > AT-3 > AT-5 in order and the correlation between the degree of absorption and firing temperature of earthenware displayed a positive correlation. Extraction amount of oxalic acid which was used for the removing iron oxide was AT-1 > AT-2 AT-4 > AT-3 > AT-5 in order. and the ion extraction data displayed that there is a positive correlation with absorption level. However AT-1 and AT-2 which were fired at lower temperature showed that there was no correlation between the ion extraction characteristics and absorption level. Ion extraction of citric acid produced little amount compared with the one of oxalic acid, yet it caused less damage to earthenware than oxalic acid when it applied. The result of ion extraction level in the absorption test displayed that Fe had higher level than in Si, Al from the test for both oxalic acid and citric acid. Based on the regression analysis of the data from the previous studies, the physical characteristics of the earthenware and ion extraction level, further studies will be conducted on the predicting technique on the extraction characteristics of major elements of earthenware samples for the conservation in future.

• Food Science and Biotechnology
• /
• v.17 no.2
• /
• pp.262-266
• /
• 2008

This study was conducted to provide a vitamin $B_{12}$ database for the representative Korean food items and to assess the dietary intake assessment of vitamin $B_{12}$ for Koreans. The vitamin $B_{12}$ content of 106 foods had been determined by high performance liquid chromatography (HPLC) using column switching method. Rich sources of vitamin $B_{12}$ were meats, milk, and egg ($0.3-3.4\;{\mu}g/100g$). Vegetables and fruits contained vitamin $B_{12}$ below limit of detection (LOD). The major food sources for vitamin $B_{12}$ intake were milk (72.0%), meats (22.3%), egg (3.6%), and fishes & shellfishes (2.1%). Mean vitamin $B_{12}$ intake of Koreans was $3.16\;{\mu}g$/person/day. The proportion of population with intake below estimate average requirement (EAR) and above recommended intake (RI) of vitamin $B_{12}$ was 60.7 and 36.5%, respectively. The vitamin $B_{12}$ intake level of young children with 1-2 years which was 834.6% of RI while the intake level of the older adults 50 years and older was only 70.0% of RI. Also, there were regional differences between urban and rural area. The population with intake below RI was larger than that with intake above RI in Korea.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.1921-1929
• /
• 2015

The smart substation is the heart of a transmission system, which is particularly emphasized as the most significant composition of smart grids in China. In order to assess the functionality performance of substation technologies, this paper presents methods used to identify the most promising solutions for smart substation design and to evaluate the technical levels of available technologies. The multi-index optimization model is presented to address the issue of smart substation planning. A mathematical model of the planning decision problem is established with multiple objectives consisting of economic, reliability, and green key indices, and many kinds of concerns including physical and environmentally friendly operations are formulated as a set of constraints. With respect to the assessment of the technical level regarding integration of advanced technologies into a substation, a modified grey whitenization weight function is adopted to structure a novel grey clustering method. The proposed grey clustering approach is used to overcome the difficulty of insufficient quantitative assessment capacity for traditional methods. The evaluation of technical effects provides the classification definition for the development phase and the maturity level of the smart substation. The effectiveness of the proposed approaches in planning decision-making and evaluation of construction efforts is demonstrated with case studies involving the actual smart substation projects of Wenchongkou substation in China Southern Power Grid (CSG) and Mengzi substation in State Grid Corporation of China (SGCC).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.227-234
• /
• 2019

A user-friendly modeling interface is developed for a process-based total system performance assessment framework (APro) specialized for a generic geological disposal system for high-level radioactive waste. The APro modeling interface is constructed using MATLAB, and the operator splitting scheme is used to combine COMSOL for simulation of multiphysics and PHREEQC for the calculation of geochemical reactions. As APro limits the modeling domain to the generic disposal system, the degree of freedom of the model is low. In contrast, the user-friendliness of the model is improved. Thermal, hydraulic, mechanical and chemical processes considered in the disposal system are modularized, and users can select one of multiple modules: "Default process" and multi "Alternative process". APro mainly consists of an input data part and calculation execution part. The input data are prepared in a single EXCEL file with a given format, and the calculation part is coded using MATLAB. The final results of the calculation are created as an independent COMSOL file for further analysis.

• Journal of Science Education
• /
• v.45 no.3
• /
• pp.349-363
• /
• 2021

The purpose of this study is to develop an instrument for school STEAM education diagnostic assessment. Literature reviews, the developmental study of a prototype instrument, experts' advices, and pilot study were administrated. The school STEAM education diagnostic assessment was consist of five areas: 'STEM education action and sustainability plan,' 'STEAM curriculum and instruction,' 'STEAM professional development,' 'process-based evaluation,' and 'community and partnerships.' Each area had one to five sub-areas. A total of 14 diagnosis items were developed, including items that can diagnose the school's STEAM environment base and STEAM education execution level at the school unit and member level for each area. The validation of the diagnostic assessment was conducted through the content validity of the expert group and the validity of a survey targeting school teachers. For applying the instrument for STEAM Education School Assessment to schools, a total of 267 elementary, middle, and high schools participated. As a result, the average of the five areas was 1.46 to 2.18. This instrument comprehensively diagnoses and evaluates the implementation and effectiveness of STEAM education in schools, and is expected to be used as basic data and core data for implementing STEAM education.

• Nuclear Engineering and Technology
• /
• v.35 no.2
• /
• pp.91-107
• /
• 2003

Since DBA(Design Basis Accidents) has been studied rather separately from SA(Severe Accidents) in the conventional nuclear reactor safety analysis, the thermal hydraulics during transition between DBA and SA has not been identified so much as each accident itself. Thus, in this study, the thermal hydraulic behavior from DBA to the commencement of SA has been experimentally and analytically investigated for the long-term cooling phase of LB-LOCA(Large-Break Loss-of-Coolant Accident). Experiments were conducted for both cases of the loop seal open and closed in an integral test loop, named as SNUF (Seoul National University Facility), which was scaled down to l/6.4 in length and 1/178 in area of the APR1400 (Advanced Power Reactor 1400MWe). The core mixture level was a main measured value since it took major role in the fuel heat-up rate, the location of fuel melting initiation and the channel blockage by melting material during SA. Experimental results were compared to MAAP4.03 to assess its model of calculating the core mixture level. MAAP4.03 overestimates the core two- phase mixture level because sweep-out and spill-over and the measures to simulate the status of loop seal are not included, which is against the conservatism. Thus, it is recommended that MAAP4.03 should be improved to simulate the thermal hydraulic phenomena, such as sweep-out, spill-over and the status of loop seal.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.975-983
• /
• 2020

Since the Fukushima Daiichi accident in 2011, concerns for the safety of multi-unit Nuclear Power Plant (NPP) sites have risen. This is because more than 70% of NPP sites are multi-unit sites that have two or more NPP units and a multi-unit accident occurred for the first time. After this accident, Probability Safety Assessment (PSA) has been considered in many countries as one of the tools to quantitatively assess the safety for multi-unit NPP sites. One of the biggest concerns for a multi-unit accident such as Fukushima is that the consequences (health and economic) will be significantly higher than in the case of a single-unit accident. However, many studies on multi-unit PSA have focused on Level 1 & 2 PSA, and there are many challenges in terms of public acceptance due to various speculations without an engineering background. In this study, two kinds of multi-unit Level 3 PSA for multi-unit site have been carried out. The first case was the estimation of multi-unit risk with conservative assumptions to investigate the margin between multi-unit risk and QHO, and the other was to identify the effect of time delays in releases between NPP units on the same site. Through these two kinds of assessments, we aimed at investigating the level of multi-unit risk and understanding the characteristics of risk in a multiunit context.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.1369-1372
• /
• 2012

공공시설 자산관리는 새로운 시설물 유지보수 개념으로 유지관리체계를 넘어 자산의 가치를 높이는 관리체계이다. 이 연구의 목적은 도로 및 교량 같은 공공시설에 자산관리체계를 지원하는 정보시스템을 구축하는데 필수적인 자산의 가치와 가치비용을 평가하는 방법을 개발하는 것이다. 따라서 자산가치를 자산평가 척도인 LoS(Level of Service)를 바탕으로 금전적인 값어치로 공학적 관점에서 계산하는 이론적 방법을 연구하였다. 가치개념을 정립하기 위해 성능은 LoS를 적용하였고, 비용은 유지관리를 위한 직접 투입비용을 적용하였다. 연구목적상 기존 연구결과인 자산비용과 가치비용의 개념을 적용하였으며 합리적인 시설물의 가치비용을 추정하기 위해 추가적으로 자산의 규모, 시설물의 현재 상태, 투입예산의 효과, 시설물의 중요도를 고려하도록 제안하였다. 제안한 자산비용을 바탕으로 하는 가치비용이 최대가 되는 유지관리대안을 선정한다면 최적의 시나리오가 될 것이다.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.4
• /
• pp.51-58
• /
• 2020

Many types of optical plastic films are essential in optoelectronics display unit fabrication and it is important to develop high precision laser cutting methods of optical films with extremely low level of film surface contamination by fume particles. This study investigates the effects of suction and blowing air motions with air flow misalignment in removing fume particles from laser cut line by employing random particle trajectory simulation and probabilistic particle generation model. The computational results show fume particle dispersion behaviors on optical film under suction and blowing air flow conditions. It is found that suction air flow motion is more advantageous to blowing air motion in reducing film surface contamination outside designated target margin from laser cut line. While air flow misalignment adversely affects particle dispersion in blowing air flows, its effects become much more complicated in suction air flows by showing different particle dispersion patterns around laser cut line. It is required to have more careful air flow alignment in fume particle removal under suction air flow conditions.

• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2004.11a
• /
• pp.271-274
• /
• 2004

Nutritional genomics is a new field of study of how nutrition interacts with an individual's genome or individual responds to individual diets. Systematic approach of nutritional genomics will likely provide important clues about responders and non-responders. The current interest in personalizing health stems from the breakthroughs emerging in integrative technologies of genomics and epigenomics and the identification of genetic and epigentic diversity in individual's genetic make-up that are associated with variations in many aspects of health, including diet-related diseases. Microarray is a powerful screen system that is being also currently employed in nutritional research. Monitoring of gene expression at genome level is now possible with this technology, which allows the simultaneous assessment of the transcription of tens of thousands of genes and of their relative expression of pathological cells such tumor cells compared with that of normal cells. Epigenetic events such as DNA methylation can result in change of gene expression without involving changes in gene sequence. Recent developed technology of DNAarray-based methylation assay will facilitate wide study of epigenetic process in nutrigenomics. Some of the areas that would benefitfrom these technologies include identifying molecular targets (Biomarkers) for the risk and benefit assessment. These characterized biomarkers can reflect expose, response, and susceptibility to foods and their components. Furthermore the identified new biomarker perhaps can be utilized as a indicator of delivery system fur optimizing health.