• Journal of Engineering Education Research
• /
• 제26권3호
• /
• pp.3-11
• /
• 2023

This study introduces the peer class consulting program at K-Institute of Technology aimed at improving class quality through the diagnosis of professors' teaching methods, analysis of the pros and cons, and assessment of their class management ability. To carry out the program, 641 students taking classes with the professors were surveyed on their satisfaction and learning motivation levels. The class composition was analyzed by monitoring the professor's class. The effect of the consulting was verified by comparing students' class satisfaction scores before and after consulting. Additionally, 29 professors subject to the consulting were surveyed on their satisfaction with the program. According to the results, professors subject to the consulting recognized that the teaching methods and class management strategies presented through the consulting effectively improved student satisfaction and motivation and provided an opportunity to gain confidence through the class. Furthermore, professors subject to the consulting were able to acquire knowledge, skills, and attitudes related to class management, and they perceived the program positively, stating that it allowed them to quickly adapt to the university education environment through cooperative communication with senior professors serving as consultants.

• Current Optics and Photonics
• /
• 제7권4호
• /
• pp.387-397
• /
• 2023

Tooth surface shape error is an important parameter in gear accuracy evaluation. When tooth surface shape error is measured by laser interferometry, the gear interferogram is highly distorted and the gray level distribution is not uniform. Therefore, it is important for gear interferometry to extract the foreground region from the gear interference fringe image directly and accurately. This paper presents an approach for foreground extraction in gear interference images by leveraging the sinusoidal variation characteristics shown by the interference fringes. A gray level mask with an adaptive threshold is established to capture the relevant features, while a local variance evaluation function is employed to analyze the fluctuation state of the interference image and derive a repair mask. By combining these masks, the foreground region is directly extracted. Comparative evaluations using qualitative and quantitative assessment methods are performed to compare the proposed algorithm with both reference results and traditional approaches. The experimental findings reveal a remarkable degree of matching between the algorithm and the reference results. As a result, this method shows great potential for widespread application in the foreground extraction of gear interference images.

• Journal of Information Technology Services
• /
• 제11권sup호
• /
• pp.1-16
• /
• 2012

Information technology is a useful strategic weapon that can create competitive advantage and new business opportunity by applying it in the organization' value chain. IT convergence can be understood as an attempt of industrial level IT adoption to facilitate the innovation of the industry and the birth of a new industry. This study provides the comprehensive review of the Korean government' three IT assimilation programs, ubiquitous technology diffusion program of the Ministry of Knowledge Economy, u-service program of the Ministry of Public Administration and Security, and u-Defence cooperation program of the Department of Defense. The analysis is done through the interpretation of the existing literature and the logic model. The result proposes inter-agency cooperation and building of new technology road-map in the planning stage, flexible management in the execution phase, and failure tolerant evaluation system. The proposal for developing competencies and institutional foundations for IT convergence also presented.

• International Journal of Computer Science & Network Security
• /
• 제22권7호
• /
• pp.171-180
• /
• 2022

In the knowledge development of online assessment in learning management systems (LMSs), many assessments are evaluated weekly in the summer training course for undergraduate students in the Faculty of Computing and Information Technology at King Abdul-Aziz University in Saudi Arabia. The number of performance assessments in the summer training course reaches 15 weeks. Many of them, however, are sent or done informally or through unreliable ways and cannot be verified by third parties. Therefore, applying the concept of digital transformation is essential. This research study reported herein used the action design research (ADR) method to build a new information technology system that could assist in the digital transformation. An electronic platform was designed, developed, implemented, and evaluated using the ADR method so that the main people involved in the summer training process (i.e., students, academic supervisors, and administrators) would have a high level of satisfaction with it. The study was conducted on 452 students, 105 academic supervisors, and 15 administrative staff and was conducted during the summer semester of 2020. All the training processes were digitally transformed and automated to control and raise the level and reliability of the training. All involved people were satisfied, thus, shifting the process to be in a digital form assist in achieving the high-level goal.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권2호
• /
• pp.238-249
• /
• 2012

Flight test of flapping micro air vehicles (FMAVs) is carried out using an instrumented measurement system to obtain various engineering parameters and hence to assess the flight performance of the vehicles through the data investigation. An indoor flight test facility equipped with a motion capture system and tracking cameras is used for the work presented in this paper. Maneuvers including straight-level flight, ground flapping, takeoff and landing are tested. Spatial position and orientation data are obtained from the retro-reflective tracking markers attached to the vehicles. Subsequent test analysis is carried out by generating performance parameters from raw data and then assessing the flight performance by comparison of the vehicles. The main findings of this work confirm that the test method and procedures presented here enable the systematic numerical data measurement and assessment of the flying performances of these vehicles, and show the applicability for the test and evaluation of general flapping MAVs.

• Journal of the Korean Society for Marine Environment & Energy
• /
• 제13권2호
• /
• pp.121-125
• /
• 2010

Carbon Capture and Storage (CCS) technology mitigates the emission amount of carbon dioxide into the atmosphere and can reduce green house effect which causes the climate change. Deep saline aquifer or obsolete oil/gas storage etc. in the marine geological structure are considered as the candidates for the storage. The injection and storage relating technology have been interested in the global society, however the adverse effect caused by leakage from the system failure. Even the safety level of the CCS is very high and there is almost no possibility to leak but, still the risk to marine ecosystem of the high concentrated carbon dioxide exposure is not verified. The present study introduces the system and environmental risk assessment methods. The feature, event and process approach can be a good starting point and we found the some possibility from the fault tree analysis for evaluation. From the FEP analysis, we drove the possible scenario which we need to concentrate on the construction and operation stages.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제52권7호
• /
• pp.169-177
• /
• 2015

This paper described a fuzzy comprehensive evaluation method and implemented assessment system for multi-layer decision making. The proposed method is a assessment before bidding through the key questions using fuzzy comprehensive evaluation method and the entropy weights. The key questions are given by the wider investigation of major sports event organizers. The paper carried out evaluation of single factor and fuzzy comprehensive evaluation from low layer to high layer step by step. In order to verify the effectiveness of proposed method, we built the sports event management service platform (SEMSP) for assessment of applicant city. This method represents a unified one of the quantitative results and the qualitative results based on the judgment of experts.

• Journal of Korean Society on Water Environment
• /
• 제37권6호
• /
• pp.501-509
• /
• 2021

In 2018, total 263 micro and emerging contaminants were selected as target substances by the Ministry of Environment, and 80 of them were first-class substance including endocrine disruptors, residual Pharmaceuticals and Personal Care Products (PPCPs), residual organic pollutants, pesticides and heavy metals. In this study, in order to evaluate the Hazard Quotient (HQ) of the 80 types in the domestic water environment the concentration of discharged effluent and nearby water environment reported by Korean institutes since 2010 was investigated. There were 45 substances reported to be detected, and Measurement Environment Concentration (MEC) were obtained by collectively converting them into water environment concentration. For biotoxicity, half maximal Effective Dose (EC50) to Daphnia magna, a water fleas species widely adopted in Material Safety Data Sheet (MSDS) was applied. As for the biotoxicity level, the Predicted No-Effect Concentration (PNEC) was obtained by applying the Assessment Factor (AF) and the HQ was derived by dividing it from the MEC. As a result of calculating the HQ, more than 1 substances were Cabamazepine, Mefenamic acid, Acetaminophen, Ibuprofen, Nonylphenol, Nickel, Erythromycin, Acetylslic acid, etc. Meanwhile, perfluorinated compounds were identified as hazardous substances in the water env ironment, with 5 out of 14 species included in the 20 ranks of first-class substance.

• Journal of Navigation and Port Research
• /
• 제36권4호
• /
• pp.279-284
• /
• 2012

This study aims to identify the degree of safety when mariners take their actions in several different situations. We have carried out many experiments to observe mariners' behavior and then measured the safety level based on their actions to avoid dangerous situations of ships collision. One of the most important actions that mariners have to take, either as their daily routine or when they are in a collision situation and then want to avoid that situation is the lookout. In this paper, behaviors on the lookout have been defined as a standard sequence of three steps which are "time of first detection", "time of recognition as risky vessel" and "time of starting avoiding action", and the suitability and applicability of the definition have been shown. And also we propose the risk assessment on ships collision and the recommendation for reducing ships collision at sea. Some analyzing results and the application of the results are reported. By combining these knowledge and some systematic studies, we propose the risk assessment on ships collision and the recommendation for reducing ships collision at sea.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2124-2135
• /
• 2006

In this paper, the reliability estimation of pipelines is performed by employing the probabilistic method, which accounts for the uncertainties in the load and resistance parameters of the limit state function. The FORM (first order reliability method) and the SORM (second order reliability method) are carried out to estimate the failure probability of pipeline utilizing the FAD (failure assessment diagram). And the reliability of pipeline is assessed by using this failure probability and analyzed in accordance with a target safety level. Furthermore, the MCS (Monte Carlo Simulation) is used to verify the results of the FORM and the SORM. It is noted that the failure probability increases with the increase of dent depth, gouge depth, operating pressure, outside radius, and the decrease of wall thickness. It is found that the FORM utilizing the FAD is a useful and is an efficient method to estimate the failure probability in the reliability assessment of a pipeline. Furthermore, the pipeline safety assessment technique with the deterministic procedure utilizing the FAD only is turned out more conservative than those obtained by using the probability theory together with the FAD. The probabilistic method such as the FORM, the SORM and the MCS can be used by most plant designers regarding the operating condition and design parameters.