• 한국토양비료학회지
• /
• 제36권6호
• /
• pp.384-390
• /
• 2003

논토양의 환경기준 인산지표 예측기술개발을 위하여 논토양 35점을 $25{\pm}1^{\circ}C$ 에서 1, 2, 4주간 담수 항온한 결과 담수 항온 전 풍건 토양의 $0.01M\;CaCl_2$ 가용인산 함량과 유효인산 함량 및 인산흡수능의 관계는 습토로 분석할 경우 상관계수의 크기는 유효인산/인산흡수량>유효인산>유효인산/인산흡수계수>인산흡수량>총인산>인산흡수계수 순이었고, 항온기간별 상관계수 크기는 습토로 분석할 경우 항온이 길어질수록 상관계수는 점점 낮아 졌으나, 건토로 분석할 경우는 이와 반대 경향이었다. 토양의 유효인산 함량과 인산흡수량을 활용하여 $0.01M\;CaCl_2$ 가용인산 농도를 추정할 수 있는 관계식 $0.01M\;CaCl_2-P=0.0828$ (유효인산/인산흡수량) + 0.0374을 얻었으며, 이러한 관계식은 토양의 인산 함량과 인산흡수 특성을 고려하여 작물재배에 필요한 적정 유효인산 함량의 추정과 토양 인산의 유실 가능성 등을 예측하는데 활용될 수 있을 것이다.

• 한국식품과학회지
• /
• 제27권6호
• /
• pp.997-1002
• /
• 1995

상업적으로 제조된 키틴으로 부터 키토산을 제조할 때 반응온도, 시간, 키틴의 입자크기가 제조된 키토산의 물리 화학적 성질에 미치는 영향을 검토하였다. 78% 이상의 탈아세틸화를 시키기 위하여서는 $100^{\circ}C$에서는 6시간, $120^{\circ}C$에서는 20분, $140^{\circ}C$에서는 10분 정도를 처리하였으며 이때 생성된 키토산의 점도는 각각 180cps, 130 cps, 30 cps로 측정되었다. 또한 반응 후 잔류시간이 키토산의 점도를 감소시킴을 보였으며 키틴의 입자크기가 작은 경우에 탈아세틸화를 촉진시키며 동일한 탈아세틸화도에서 높은 점도를 유지하였다. 한편 생성된 키토산은 키틴에 비하여 수분흡수, 지방흡수성에서 차이를 보이지 않았으나 색소흡수능력은 평균 4배이상 증가하였다. IR스펙트럼에서는 전반적으로 둔화된 모습을 보였으며 특히 $1,000{\sim}1,800\;cm^{-1}$에서 흡수pattern이 둔화되었다.

• 공업화학
• /
• 제8권4호
• /
• pp.568-574
• /
• 1997

Ni/MH전지에서 Cu 도금이 MH(metal hydride)음극의 전극 특성에 미치는 영향을 실험적으로 조사하였다. $LaNi_5$와 Cu도금된 $LaNi_5$를 활물질로 사용하여 냉간압착법과 페이스트법의 혼용법으로 전극을 제조하였다. 그 결과 소량의 CMC(carboxymethylcellulose sodium salt)를 첨가하고 열처리를 행하지 않은 전극이 높은 방전용량을 보였다. $LaNi_5$보다는 Cu 도금된 $LaNi_5$를 활물질로 사용하여 제조한 전극의 방전용량이 증가하였으며, 이는 $LaNi_5$표면에 도금된 구리에 의해 전극의 전자 전도도가 증가되었기 때문이며 도금된 구리의 양이 증가할 수록 그 효과는 현저하였다. 또한 전극의 방전용량은 산성 무전해도금의 경우가 알칼리성 무전해도금을 행한 전극보다 우수한 용량을 나타내었다. Al이 첨가된 $LaNi_{4.5}Al_{0.5}$ 전극이 $LaNi_5$전극보다 우수한 방전용량을 보였다. 구리 도금이 $LaNi_5$의 피독특성에 미치는 영향을 CO기체의 피독실험으로 조사하였다.

• 원예과학기술지
• /
• 제33권3호
• /
• pp.383-389
• /
• 2015

Chitooligosaccharide (COS), as antioxidant, extensively applied to food and juice preservation. In the present study, influences of COS on vase life and ornamental value of cut roses were investigated. Results showed that vase life of cut roses treated by COS was longer 6.4 days than one of control and ornamental character of cut roses was improved effectively by COS. The increase of vase life and ornamental value were chiefly governed by that COS improved water absorption capacity of cut roses. Besides that, COS decreased the contents of superoxide anion and hydrogen peroxide and lowered the levels of malondialdehyde in turn during the senescence process of cut roses. That was because that COS not only enhanced activities of antioxidant enzymes glutathione reductase, but also improved reduced glutathione contents in petals of cut rose. Therefore, COS could be used in commercial preservatives to improve the longevity of cut roses.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2281-2285
• /
• 2013

The electronic structure, optical spectra, and thermodynamic properties of the three FOX-7 polymorphs (${\alpha}$, ${\beta}$, and ${\gamma}$) have been studied systematically using density functional theory. The LDA (CA-PZ) and generalized gradient approximation (GGA) (PW91) functions were used to relax the three FOX-7 phases without any constraint. Their density of states and partial density of states were calculated and analyzed. The band gaps for the three phases were calculated and the sequence of their sensitivity was presented. Their absorption coefficients were computed and compared. The thermodynamic functions including enthalpy (H), entropy (S), free energy (G), and heat capacity ($C_p$) for the three phases were evaluated.

• Structural Engineering and Mechanics
• /
• 제85권6호
• /
• pp.743-753
• /
• 2023

Piezoelectricity is defined as the ability of certain materials to produce electric signals when mechanically stressed or to deform when an electrical potential is applied. Piezo technology is becoming increasingly crucial as intelligent devices use vibration sensors to detect vibrations in consumer electronics, the automotive industry, architectural design, and other applications. A wide range of applications is now possible with piezoelectric sensors, such as skin-attachable devices that monitor health and detect diseases. In this article, copper nanoparticles are used in the piezoelectric sensor as the driving agent of the magnetic field. Magnetic nanocatalysts containing copper nanoparticles are used due to their cheapness and availability. Considering that the increase of the electric field acting on the piezoelectric increases the damping (As a result, damping materials reduce radiation noise and increase material transfer losses by altering the natural vibration frequency of the vibrating surface). Among the advantages of this method are depreciating a significant amount of input energy using high energy absorption capacity and controlling slight vibrations in the sensors.

• 대한환경공학회지
• /
• 제30권2호
• /
• pp.225-233
• /
• 2008

지구 온난화에 대한 기여도가 50% 이상인 CO$_2$를 제어하려는 국제적 관심에 따라 CO$_2$ 제어에 대한 새로운 기술개발이 진행되고 있다. 따라서 본 연구에서는 PVA함량 및 소성온도에 따라 흡수제를 제조하여 고정층에서 CO$_2$ 흡수/재생 연속 실험 및 SO$_2$ 농도에 관한 실험을 수행하였다. 연구 결과, 비표면적은 832.79 m$^2$/g로 나타났고, SEM 측정결과 미세기공이 발달하여 건식흡수제로서의 가능성을 보였으며, CO$_2$ 흡수/재생 연속 실험에서는 SO$_2$ gas가 존재할 경우 부반응물질인 $Na_2SO_3$와 $Na_2SO_4$생성으로 CO$_2$ 흡수능 저하를 보였다.

• Advances in concrete construction
• /
• 제13권6호
• /
• pp.433-450
• /
• 2022

The conventional disposal methods of waste tires are harmful to the environment. Moreover, the recycling/reuse of waste tires in domestic and industrial applications is limited due to parent product's quality control and environmental concerns. Additionally, the recycling industry often prefers powdered rubber particles (<0.60 mm). However, the processing of waste tires yields both powdered and coarser (>0.60 mm) size fractions. Reprocessing of coarser rubber requires higher energy increasing the product cost. Therefore, the waste tire rubber (WTR) less favored by the recycling industry is encouraged for use in construction products as one of the environment-friendly disposal methods. In this study, WTR fiber >0.60 mm size fraction is collected from the industry and sorted into 0.60-1.18, 1.18-2.36-, and 2.36-4.75-mm sizes. The effects of different fiber size fractions are studied by incorporating it as fine aggregates at 10%, 20%, and 30% in the self-compacting rubberized concrete (SCRC). The experimental investigations are carried out by performing fresh and hardened state tests. As the fresh state tests, the slump-flow, T500, V-funnel, and L-box are performed. As the hardened state tests, the scanning electron microscope, compressive strength, flexural strength and split tensile strength tests are conducted. Also, the water absorption, porosity, and ultrasonic pulse velocity tests are performed to measure durability. Furthermore, SCRC's energy absorption capacity is evaluated using the falling weight impact test. The statistical significance of content and size fraction of WTR fiber on SCRC is evaluated using the analysis of variance (ANOVA). As the general conclusion, implementation of various size fraction WTR fiber as fine aggregate showed potential for producing concrete for construction applications. Thus, use of WTR fiber in concrete is suggested for safe, and feasible waste tire disposal.

• Applied Biological Chemistry
• /
• 제49권4호
• /
• pp.304-308
• /
• 2006

누에번데기에 함유되어 있는 불용성 단백질을 가용성 단백질로 추출시키기 위하여 누에번데기에 Bacillus sp. JH-209 균주로부터 생산된 protease를 작용시켰다. 이때 누에번데기 단백질의 추출을 위한 적정 pH는 pH $7{\sim}11$까지의 알칼리 영역에서 추출율의 증가를 보였다. 최적 온도는 $40^{\circ}C$였고, 최적 작용시간은 11시간이었고, 효소의 최적 첨가량은 60 unit 정도였다. 효소처리 된 누에번데기 단백질은 효소처리하지 않은 대조구에 비해 기포력, 기포안정성, 유화력과 유화안정성이 증가하였고, 유지흡착력과 수분흡착력도 대조구에 비해서 높은값을 나타내었다.

• Steel and Composite Structures
• /
• 제25권3호
• /
• pp.327-335
• /
• 2017

To gain more knowledge of aluminum foam sandwich structure and promote the engineering application, aluminum foam sandwich consisting of 7050 matrix aluminum foam core and 304 stainless steel face-sheets was studied under three-point bending by WDW-T100 electronic universal tensile testing machine in this work. Results showed that when aluminum foam core was reinforced by 304 steel face-sheets, its load carrying capacity improved dramatically. The maximum load of AFS in three-point bending increased with the foam core density or face-sheet thickness monotonically. And also when foam core was reinforced by 304 steel panels, the energy absorption ability of foam came into play effectively. There was a clear plastic platform in the load-displacement curve of AFS in three-point bending. No crack of 304 steel happened in the present tests. Two collapse modes appeared, mode A comprised plastic hinge formation at the mid-span of the sandwich beam, with shear yielding of the core. Mode B consisted of plastic hinge formation both at mid-span and at the outer supports.