• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.5716-5720
• /
• 2012

To expand the use of three dimensional(3D) product modelling in the army, we have analyzed military technical data management system, as well as the military guidelines for the unique format and content of technical data package. Because traditional munition sector is based on the machinery and equipment industry, they have usually applied two dimensional(2D) drawings to prepare a design and to make a product. For that reason, there is no provision for 3D product modelling as a technical data package in the military guideline. In this study, we proposed an improvement scheme for the vitalization of 3D product modelling in the army not only in terms of related guideline but also military technical data management system.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.717-724
• /
• 2011

In order to commercialize the track systems including the turnouts developed in Korea, the guideline of technical and systematic performance evaluation considering local environment was established on Aug. 2010. It consists of a technical compatibility, laboratory test and in-service test. Technical compatibility and laboratory test of the domestically-developed swing-nose crossing turnout on slab track(F18.5) were evaluated according to the guideline. And then in-service test was performed for the turnout installed at the 2nd phase site of Kyung-Bu HSR. In-service test is comprised of monitoring, and field and on-board test during KTX operation, where monitoring is to check the maintainability, and field and on-board test is to confirm structural and running safety. This paper is intended to explain the requirements for the in-serve test and analyze the results of monitoring and the data measured at field and on-board. Based on the in-service test, it is proven that performance of the domestically-developed swing-nose crossing turnout on slab track(F18.5) well satisfies the requirements of the guideline.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.385-395
• /
• 2021

Objectives: This study aimed to select items for technical guidelines through the guidelines of the Korean Occupational Safety and Health Agency (KOSHA) for agricultural workplaces. Methods: All 1,308 guidelines provided by KOSHA were reviewed and categorized using a Delphi technique questionnaire on their compatibility and urgency. Results: Among all the KOSHA guidelines, 100 items related to agricultural workplaces were selected. After that, two Delphi questionnaires were conducted and 46 items were finally selected. The average compatibility was calculated as 4.26, and urgency was 2.39. As a result of measuring the content validity of 46 items, six items were identified that were not relevant to agriculture. The final selected items were classified into four categories: Health examination and management, machinery standards, safety and health standard guides, and workplace environment management. Conclusions: The various risk factors at agricultural workplaces should be prevented and managed. It was shown that related technical guidelines or work standard manuals should be prepared. The technical guidelines of KOSHA will be provided as basic categories in the agricultural sector.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.469-481
• /
• 2021

Under Korean law, small-to-medium-sized construction projects with budgets of more than 100 million won and less than 12 billion won must receive technical guidance by a visiting technician belonging to a specialized institution. This study proposed a method for calculating the technical guidance fee to prevent the potential inadequacy of technical guidance when the responsibility providing the technical guidance fee is changed from a contractor to a client. The method simplified the construction works which should receive technical guidance into four sections according to the construction amount. For each section, the number of instances of technical guidance per day provided by the visiting technician and the minimum technical grade of the visiting technician were limited, and the guideline for estimating engineering services fees was applied to calculate the fee per instance of technical guidance. The results show that the proposed method can be applied to the establishment of a technical guidance fee guideline since it well reflects the current fee distribution and K2B analysis results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1133-1140
• /
• 2012

In Korea, it is constructing the Intelligent Transportation System(ITS) in according with the ITS project implementation guideline and each ITS standard on the basis of "National Integrated Transportation System Efficiency Act". However, only a few ITS project implementation guideline and ITS standard for the exchange of information technologies are not able to construct a smart ITS, without technical regulation for the technical characteristics of the main ITS equipment. Therefore, in this paper, we identify the current status and problems of the legal system and look for the necessity of technical regulation enactment for the smart ITS construction.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.166-168
• /
• 2001

Generation by the privately owned generators, which are normally operated has occupied about 10% of total generation. Recently the small co-generation employed gas engine has been introduced and attracted public interest. For privately owned generator to be paralleled Utilities, a customer complies with Generator Parallel Operation Guideline set by Utilities and installs related protective relays. But the guideline is not specified to small co-generation, only provides parallel operation of privately owned generator. So applying this guideline, initial investment can be too high comparing to total co-generation cost. Besides there is no specified guide about ALTS, which arises asynchronous problem. In this paper we analyzed guideline and technical problem when small co-generation is paralleled. And additionally needed researching area to improve distribution of small co-generation is discussed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.3
• /
• pp.11-22
• /
• 2015

• Journal of Forest and Environmental Science
• /
• v.32 no.4
• /
• pp.392-399
• /
• 2016

This review paper presents guidelines which stakeholders use in addressing on-farm tree planting configuration, establishment, tending, silvi- cultural management, management of pests and diseases, challenges and opportunities as practiced in the medium to high potential areas of Kenya. The tree planting configurations discussed includes blocks planting (woodlot), boundary, compound planting, home/fruit gardens, trees intercropped or mixed with pasture, trees on riverbanks and roadside. Participatory monitoring and evaluation techniques have been highlighted. The main challenges facing tree planting activities include culture and attitude of local people, land and tree tenure, inadequate technical support, lack of recognition and integration of technical information and indigenous knowledge, capital and labour shortages, lack of appropriate incentives measures, damage by domestic and wild animals, conflict over trees on the boundary and policy and legal issues. This guideline targets forest managers, extension agents, students and other practitioners in policy and day to day decision making processes in Kenya.

• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.263-271
• /
• 2016

The market size of the bone absorptiometric X-ray system and the number of its approval by Ministry of Food and Drug Safety (MFDS) has annually increased, with a trend of increasing aging population and osteoporosis patients. For approval of manufactured or imported medical devices in Republic of Korea, it is required to submit its technical document. Therefore, it is need to develop the technical document guideline for the bone absorptiometric X-ray system for manufacturers, importers and reviewers. First of all, the technical documents which were already approved were examined and analyzed through MFDS approval administration system. Second, safety and performance test standards and methods that match international standards were drawn after conducting survey of the market status and the technology development trend for it, with examination and analysis of applicable domestic and overseas standards. Third, by operating industry-research-government cooperation, the guideline draft on writing technical document for the bone absorptiometric X-ray system was discussed, collecting their opinion. As a result, it is suitable to international and domestic condition, includes test evaluation methods and offer various information with appropriate examples to civil petitioner, when they write the technical documents.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1994.11a
• /
• pp.316-323
• /
• 1994