• Journal of KIISE:Information Networking
• /
• v.36 no.6
• /
• pp.505-513
• /
• 2009

In some wireless sensor networks, each wireless sensor network has its own target lifetime (desired lifetime after deployment). However, satisfying the target lifetime is not a trivial problem since the nodes in wireless sensor networks often rely on batteries as their power source. In this paper, we propose an energy efficient routing algorithm that satisfies the target-lifetime requirement of a wireless sensor network. The proposed routing algorithm not only finds energy efficient paths but also optimizes the sensing rate of each sensor node. Through simulation, we compare the performance of the proposed scheme with several other existing algorithms.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.919-926
• /
• 2023

To analyze the cause of the destruction of thin, carbon-backed lithium fluoride targets during a measurement of the fusion of ⁷Li and ¹⁷O, we estimate theoretically the lifetimes of carbon and LiF films due to sputtering, thermal evaporation, and lattice damage and compare them with the lifetime observed in the experiment. Sputtering yields and thermal evaporation rates in carbon and LiF films are too low to play significant roles in the destruction of the targets. We estimate the lifetime of the target due to lattice damage of the carbon backing and the LiF film using a previously reported model. In the experiment, elastically scattered target and beam ions were detected by surface silicon barrier (SSB) detectors so that the product of the beam flux and the target density could be monitored during the experiment. The areas of the targets exposed to different beam intensities and fluences were degraded and then perforated, forming holes with a diameter around the beam spot size. Overall, the target thickness tends to decrease linearly as a function of the beam fluence. However, the thickness also exhibits an increasing interval after SSB counts per beam ion decreases linearly, extending the target lifetime. The lifetime of thin LiF film as determined by lattice damage is calculated for the first time using a lattice damage model, and the calculated lifetime agrees well with the observed target lifetime during the experiment. In experiments using a thin LiF target to induce nuclear reactions, this study suggests methods to predict the lifetime of the LiF film and arrange the experimental plan for maximum efficiency.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.605-606
• /
• 2012

In this paper, we consider the problem of scheduling sensor activity to prolong the network lifetime while guaranteeing both discrete target coverage and connectivity among all the active sensors and the sink, called connected target coverage (CTC) problem. We proposed a distributed scheme called Distributed Lifetime-Maximizing Scheme (DLMS) to solve the CTC problem. Our proposed scheme significantly reduces the cost of the construction of the connected cover graphs in comparison with the some conventional schemes. In addition, the energy consumption is more balanced so that the network lifetime will be increased. Our simulation results show that DLMS scheme performs much better than the conventional schemes in terms of the network lifetime.

• Journal of Astronomy and Space Sciences
• /
• v.14 no.1
• /
• pp.150-157
• /
• 1997

A precise determination of the fuel efficiency is important because North/South station keeping, which controls the inclination of the geostationary orbit, consumes most of the satellie fuel. We estimate the amount of fuel required during the lifetime of the KOREASAT when MFT(Minimum Fuel Target) technique is adopted, and the result is compared to those when MCT(Maximum Compensation Target) and TBCT(Track-Back Chord Target) technique are applied. From this computation, we find that if MFT technique is adopted, the lifetime of the satellite can be extended at least 45 and 15 days, respectively, compared to those consumed with MCT and TBCT technique.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.346-353
• /
• 2012

The Laser-Induced Breakdown Spectroscopy (LIBS) has great advantages as an analytical technique, namely real-time analysis without sample preparation, ideal for mobile chemical sensor for space exploration. The LIBS plasma characteristics are strongly dependent on the surrounding pressure. In this study, seven types of target (C, Ti, Ni, Cu, Sn, Al, Zn) were investigated for their elemental lifetime. The target was located in vacuum chamber which has the pressure range of 760 to $10^{-5}$ torr. As the pressure is decreased, the elemental lifetimes of carbon and titanium declined, while all other targets showed increased lifetimes until reaching 1 torr and declined with continued pressure decrease. The boiling point and electronegativity amongst the physicochemical properties of the samples are used to explain this peculiarity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.453-461
• /
• 2010

A critical issue in wireless sensor networks is an energy-efficiency since the sensor batteries have limited energy power and, in most cases, are not rechargeable. The most practical manner relate to this issue is to use a node wake-up scheduling protocol that some sensor nodes stay active to provide sensing service, while the others are inactive for conserving their energy. Especially, CTC (Connected Target Coverage) problem has been considered as a representative energy-efficiency problem considering connectivity as well as target coverage. In this paper, we propose a new energy consumption model considering multiple-targets and create a new problem, CMTC (Connected Multiple-Target Coverage) problem, of which objective is to maximize the network lifetime based on the energy consumption model. Also, we present SPT (Shortest Path based on Targets)-Greedy algorithm to solve the problem. Our simulation results show that SPT-Greedy algorithm performs much better than previous algorithm in terms of the network lifetime.

• Journal of Korean Society for Quality Management
• /
• v.45 no.4
• /
• pp.969-980
• /
• 2017

Purpose: The purpose of this study was to estimate the lifetime, and verify the target lifetime at steady state temperature, of communication cable jackets used in nuclear power plants. Method: This study was completed according to test and analysis methods required by international standards. After measuring the residual elongation(%) of specimens at specific points in time with the accelerated degradation test, average failure time of each temperature was computed. Thus, the activation energy could be derived by applying the temperature-Arrhenius law to estimate cable jacket lifetime at steady state temperature. Results: The cable jacket lifetime was estimated as 363.8 years assuming a normal nuclear power plant operating temperature of $90^{\circ}C$. Conclusion: To ascertain stable operating conditions for a nuclear power plant, accelerated degradation tests were performed according to the Arrhenius law for components of the nuclear power plants. The lifetime was estimated from the degradation data collected during the accelerated degradation test.

• Journal of Korea Multimedia Society
• /
• v.12 no.5
• /
• pp.728-736
• /
• 2009

We propose a method using the genetic algorithm to solve the maximum set cover problem. It is needed for scheduling the power of sensor nodes in extending the lifetime of the wireless sensor network with variable sensing range. The existing Greedy Heuristic method calculates the power scheduling of sensor nodes repeatedly in the process of operation, and so the communication traffic of sensor nodes is increased. The proposed method reduces the amount of communication traffic of sensor nodes, and so the energies of nodes are saved, and the lifetime of network can be extended. The effectiveness of this method was verified through computer simulation, and considering the energy losses of communication operations about 10% in the network lifetime is improved.

• Computational Structural Engineering : An International Journal
• /
• v.2 no.1
• /
• pp.11-17
• /
• 2002

Cost-effectiveness in design is considered for determining the target reliability of concrete bridges under seismic actions. This objective can be achieved based on the economic optimization of the expected life-cycle cost of a bridge, which includes initial cost, direct losses, and indirect losses of a bridge due to strong earthquakes over its lifetime. A separating factor is defined to consider the redundancy of a transportation network. The Park-Ang damage model is employed to define the damage of a bridge under seismic action, and a Monte Carlo method based on the DRAIN-2DX program is developed to assess the failure probability of a bridge. The results for an example bridge analyzed in this paper show that the optimal target failure probability depends on the traffic volume carried by the bridge and is between 1.0×10/sup -3/ to 3.0×10/sup -3/ over a life of 50 years.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8A
• /
• pp.691-701
• /
• 2011

In rotatable directional sensor networks, maximizing network lifetime while covering all the targets and forwarding the sensed data to the sink is a challenge problem. In this paper, we address the Maximum Directional Cover Tree (MDCT) problem of organizing the directional sensors into a group of non-disjoint subsets to extend the network lifetime. Each subset in which the directional sensors cover all the targets and forward the sensed data to the sink is activated at one time. For the MDCT problem, we first present an energy consumption model which mainly takes into account the energy consumption for rotation work. We also develop the Directional Coverage and Connectivity (DCC)-greedy algorithm to solve the MDCT problem. To evaluate the algorithm, we conduct simulations and show that it can extend the network lifetime.