• 한국해양공학회지
• /
• 제11권3호
• /
• pp.163-169
• /
• 1997

The simulation of target-scattered echo with the moving sonar platform and target in 3-dimensional ocean environment is essential to validate and evaluate the performance of a sonar system. This paper presents the improved target signal simulation on the basis of the highlight(HL) model and its realtime algorithm. In order to simulate the scattering highlight, the highlight is represented as a directional scatterer. The realtime generation algorithm of the target signal is realized by use of DSP chip, TMS320C40, where the 40 channels are equally separated to form a parallel processing task in 4 processors. The presented realtime-version of target signal simulation can be used as a target signal simulator in the development of ACM(Acoustic Counter Measure) and advanced sonar signal processing techniques.

• 한국군사과학기술학회지
• /
• 제8권2호
• /
• pp.49-57
• /
• 2005

The target localization using the line arrays buried in the seabed is a difficult problem due to the complex sea bottom characteristics and need to compensate the wave propagation effect to localize the target accurately Sound speed mismatch in the seabed causes a bias in the target bearing estimation and induces the localization error. In this paper we describe a target localization method with improved accuracy of target bearing and localization by calibration the sound speed in the seabed. The proposed algorithm is verified through the ocean data.

• 한국군사과학기술학회지
• /
• 제2권2호
• /
• pp.30-39
• /
• 1999

In this paper, we have proposed a novel method which can compose a reflected signal of the underwater target. The synthesis of the reflected signal in the target, the synthesized signal being similar to the characteristics of the reflected signal in the real target, is used the highlight model at the specific points of the target. We suggest the synthesis method of the reflected signal of the target using the pulsewidth variation and each other doppler effect at the highlight point, and compare the composed signal by the proposed method with that by conventional one. Simulation results show that the composed signal using the proposed method and the reflected signal of the real target is similar to the spectral characteristics.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.474-481
• /
• 2017

This paper presents a multiple target tracking system using Normalized Rayleigh likelihood of amplitude information of target. Although many studies of Radar systems using amplitude information have been studied, they are focused on single target tracking. This paper proposes the multiple target tracking using amplitude information as well as kinematic information from Radar sensor. The amplitude information are applied in generating the association probability of joint probabilistic data association(JPDA) algorithm through the normalized Rayleigh likelihood. It is verified that the proposed system can enhance the track maintenance and tracking accuracy, especially, in the target crossing case.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.179.1-179.1
• /
• 2013

Cylindrical Rotating Magnetron Sputtering Cathode (이하 Rotary Cathode)는 기존에 사용 되던 rectangular type 보다 Target 사용 효율이 높다는 큰 이점을 가지고 있다. 높은 Target 사용 효율은 비용 절감 효과와 직접적으로 관련 된다. 이번 연구는 3D Plasma simulation(PIC-MCC)을 통한 Target 사용 효율 80% 이상의 Rotary Cathode 개발을 목적으로 한다. Plasma simulation에 External Magnetic fields를 접목하여 Electron의 이동 궤적을 제어하였고, 생성된 Ion (Ar+)의 밀도 및 속도로 Plasma의 안정성과 Erosion 계산 구간을 선정 하였다. Target Erosion Profile은 Sputtering yield Data와 Target에 충돌한 Ion 정보를 사용하여 산출 하였으며, Sputtered Particles의 Deposition Profile은 계산된 Target Erosion Profile과 The cosine law of emission을 이용하여 계산 하였다. 실험 조건은 Plasma simulation의 초기조건 바탕으로 하여 2G size의 ITO Target을 대상으로 실험 하였다. 비 Erosion 영역 최소화하기 위해 Magnet Length를 변경하여 제작 적용 하였다. Simulation 계산 시간의 제약으로 인하여 simulation에서 생성된 최대 이온 밀도는 일반적으로 알려진 값 보다 적게 계산 되었지만, Simulation으로 예측한 Erosion Profile 및 Deposition Profile은 실험 값과 유사한 형태를 나타났으며, 실험 결과는 Target 사용 효율 80%이상의 결과를 보였다.

• Animal cells and systems
• /
• 제8권2호
• /
• pp.125-133
• /
• 2004

We have extended our previous work that cross-linking CD4 molecules using specific MAb induced antigen nonspecific, MHC unrestricted killing of virally infected target cells by CD$4^+$We have extended our previous work that cross-linking CD$4^+$ molecules using specific MAb induced antigen nonspecific, MHC unrestricted killing of virally infected target cells by CD$4^+$ T cells. The killing activity of antibody activated CD$4^+$T cells was completely blocked by herbimycin A, a protein tyrosine kinase (PTK) inhibitor, but not by bisindolylamaleimide, a protein kinase C (PKC) inhibitor. Herbimycin A treated human or bovine peripheral blood CD$4^+$T cells lacked PTK activity and failed to kill virally infected target cells even after cross-linking of CD4 molecules. The CD$4^+$cross-linking failed to induce effector cell proliferation or the transcription of TNF${\beta}$ Upregulation of TNF${\beta}$ was induced by incubating the antibody activated effector cells with BHV-1 infected D17 target cells for 10 h. Anti-TNF${\beta}$ antibody partially abolished (13-44%) the direct effector cell-mediated antiviral cytotoxicity. However, this antibody neutralized 70 to 100% of antiviral activity of effector and target cell culture supernatants against BHV-1 infected D17 cells. The inhibition level of the antiviral activity by the antibody was dependent on the effector and target cell ratio. These results support the hypothesis that increased p$56^ICK enzyme activity in effector cells transduces a signal critical for effector cell recognition of viral glycoproteins expressed on the target cells. Following target cell recognition, lytic cytokines known to participate in target cell killing were produced. A better understanding of the killing activity displayed by CD$4^+$T lymphocytes following surface receptor cross-linking will provide insight into the mechanisms of cytotoxic activity directed toward virally-infected cells.T cells. The killing activity of antibody activated CD$4^+$T cells was completely blocked by herbimycin A, a protein tyrosine kinase (PTK) inhibitor, but not by bisindolylamaleimide, a protein kinase C (PKC) inhibitor. Herbimycin A treated human or bovine peripheral blood CD4T cells lacked PTK activity and failed to kill virally infected target cells even after cross-linking of CD4molecules. The CD4 cross-linking failed to induce effector cell proliferation or the transcription of TNF$\beta$. Upregulation of TNF$\beta$ was induced by incubating the antibody activated effector cells with BHV-1 infected D17 target cells for 10 h. Anti-TNF$\beta$ antibody partially abolished (13-44%) the direct effector cell-mediated antiviral cytotoxicity. However, this antibody neutralized 70 to 100% of antiviral activity of effector and target cell culture supernatants against BHV-1 infected D17 cells. The inhibition level of the antiviral activity by the antibody was dependent on the effector and target cell ratio. These results support the hypothesis that increased $56^ICK enzyme activity in effector cells transduces a signal critical for effector cell recognition of viral glycoproteins expressed on the target cells. Following target cell recognition, lytic cytokines known to participate in target cell killing were produced. A better understanding of the killing activity displayed by CD$4^+$T lymphocytes following surface receptor cross-linking will provide insight into the mechanisms of cytotoxic activity directed toward virally-infected cells.

• 한국음향학회지
• /
• 제39권6호
• /
• pp.549-558
• /
• 2020

본 논문은 수상 및 수중 표적에 대한 수동소나 협대역추적의 자동초기화 견실성을 향상시키는 기법을 다루었다. 수동소나에서 탐지데이터를 활용하여 표적으로서 자동 판별 및 추적하는 경우에 탐지데이터 내 다수의 클러터에 의하여 클러터가 표적으로 판별 및 추적되며, 이는 운용자의 관심표적에 대한 인지를 방해한다. 수동소나에서 관심표적에 대한 자동 표적 판별 및 추적은 유지하면서 클러터에 대한 자동 표적 판별 및 추적은 감소하기 위하여 탐지 데이터 측정치의 연계 확률과 신호준위에 대한 정보 엔트로피를 산출한다. 탐지 데이터에서 추출한 측정치의 연계 확률과 정보 엔트로피가 사전 설정 조건을 만족하면 자동초기화 절차를 실시한다. 해상실험 데이터를 활용하여 시뮬레이션을 실시하였고, 기존 적용 기법에 대비하여 실표적에 대한 자동 추적은 유지하면서 클러터를 자동 추적하는 경향이 감소 하였다.

• 한국의학물리학회지:의학물리
• /
• 제28권4호
• /
• pp.164-170
• /
• 2017

One of the methods to consider the effect of respiratory motion of a tumor target in radiotherapy is to establish a treatment plan with the internal target volume (ITV) created based on an accurate analysis of the target motion displacement. When this method is applied to intensity modulated radiotherapy (IMRT), it is expected to yield a different treatment dose distribution under the motion condition according to the IMRT method. In this study, we prepared ITV-based IMRT plans with conventional IMRT using fixed gantry angle beams, RapidArc using volumetric modulated arc therapy, and tomotherapy using helical therapy. Then, the variation in dose distribution caused by the target motion was analyzed by the dose measurement in the actual motion condition. A delivery quality assurance plan was prepared for the established IMRT plan and the dose distribution in the actual motion condition was measured and analyzed using a two-dimensional diode detector placed on a moving phantom capable of simulating breathing movements. The dose measurement was performed considering only a uniform target shape and motion in the superior-inferior (SI) direction. In this condition, it was confirmed that the error of the dose distribution due to the target motion is minimum in tomotherapy. This is thought to be due to the characteristic of tomotherapy that treats the target sequentially by dividing it into several slices. When the target shape is uniform and the main target motion direction is SI, it is considered that tomotherapy for the ITV-based IMRT method has a characteristic which can reduce the dose difference compared with the plan dose under the target motion condition.

• 한국조경학회지
• /
• 제32권3호
• /
• pp.18-31
• /
• 2004

Ecological network can solve the ecological problems such as habitat cutting and fragmentation that are resulted from urbanization. Recently, rooftop biotope construction has been appeared as a usefull method for ecological networking in urban area. The objective of this study is to seek the possibility of rooftop greening introduction as well as to select target species for rooftop greening construction from the urban ecological network point of view. In order to select target species, we monitored two adjacent rooftop greening sites, where we found 22 species of birds and insects and 33 species of plants. We set criteria to select target species through documents research, and gave marks species according to the criteria with the help of specialists. We divided the target species into 5 groups on the basis of the 12 selecting criteria. In those two monitored rooftop greening sites, we did not find any species belong to group A, which is the best target species, but we found species belong to the other groups. Orthetrum albistylum, Sympetrum dawinianum belong to group B, which is the priority target species, 7 species besides Passer montanus, Coccinella axyridis, Agrionidae to group C, which is the possible target species, 6 species besides Atractomorpha lata to group D, which is the potential target species, and the others were found to be inadequate to the target species. We found Orthetrum albistylum, Sympetrum dawi-nianum to be the best appropriate target species in the two sites. According to the result of this study, the method of ecological network construction from the dra-gonfly habitat network point of view through the construction of rooftop habitat is ideal for Orthetrum albistylum, and Sympetrum dawinianum. For successful urban ecological network construction, selection criteria and construction techniqes & methods for rooftop habitat should be developed through future research.

• 한국의학물리학회지:의학물리
• /
• 제27권4호
• /
• pp.272-276
• /
• 2016

To investigate the optimum x-ray tube design for the dental radiology, factors affecting x-ray beam characteristics such as tungsten target thickness and anode angle were evaluated. Another goal of the study was to addresses the anode heel effect and off-axis spectra for different target angles. MCNPX has been utilized to simulate the diagnostic x-ray tube with the aim of predicting optimum target angle and angular distribution of x-ray intensity around the x-ray target. For simulation of x-ray spectra, MCNPX was run in photon and electron using default values for PHYS:P and PHYS:E cards to enable full electron and photon transport. The x-ray tube consists of an evacuated 1 mm alumina envelope containing a tungsten anode embedded in a copper part. The envelope is encased in lead shield with an opening window. MCNPX simulations were run for x-ray tube potentials of 70 kV. A monoenergetic electron source at the distance of 2 cm from the anode surface was considered. The electron beam diameter was 0.3 mm striking on the focal spot. In this work, the optimum thickness of tungsten target was $3{\mu}m$ for the 70 kV electron potential. To determine the angle with the highest photon intensity per initial electron striking on the target, the x-ray intensity per initial electron was calculated for different tungsten target angles. The optimum anode angle based only on x-ray beam flatness was 35 degree. It should be mentioned that there is a considerable trade-off between anode angle which determines the focal spot size and geometric penumbra. The optimized thickness of a target material was calculated to maximize the x-ray intensity produced from a tungsten target materials for a 70 keV electron energy. Our results also showed that the anode angle has an influencing effect on heel effect and beam intensity across the beam.