• Progress in Medical Physics
• /
• v.19 no.2
• /
• pp.131-138
• /
• 2008

We evaluated on the calculation accuracy of treatment planning system (TPS) with phantom having convex and concave surface. The TPS is Eclipse (Varian, USA) using both algorithms AAA and PBC for photon dose calculations. PBC algorithms have three corrections of Batho, modified Batho (M-Batho), and equivalent TAR (E-TAR). The field sizes were $10{\times}10\;cm^2$ and $20{\times}20\;cm^2$, and MLC-shaped fields for these fields. We measured doses at three depths 5, 10 and 15cm in phantom of SSD=90cm in the condition of inserted farmer chamber. For given conditions, we have calculated dose with these algorithms and compared them with measured doses. In AAA the calculated doses (dose/MU) were agreed to measured doses within ${\pm}1%$ in flat and convex surface and were under estimated with -1.9% maximum in concave surface. In PBC the calculated doses were over estimated with +1.7% and +4.1% respectively in flat and convex surface and the differences were from -3.1% to +2.1% in concave surface. In comparison of criteria from AAPM and IAEA reports, and statistical analysis for these results, it is found that the AAA's results are in good agreement with measured values and the M-Batho's results are generally good agreed with measured values among PBC algorithms.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.2
• /
• pp.124-134
• /
• 2005

To investigate the exposure effect of polynuclear aromatic hydrocarbons (PAHs), we measured airborne total PAHs as an external dose, urinary 1-hydroxypyrene (1-OHP) as an internal dose of PAHs exposure, and analyzed the relationship between urinary 1-OHP concentration and PAHs exposure. The study population contained 44 workers in steel-pipe coating and paint manufacture industries. The airborne PAHs was obtained during survey day, and urine were sampled at the end of shift. Personal information on age, body weight, height, eniployment duration, smoking habit, and alcohol consumption was obtained by a structured questionnaire. Airborne PAHs were analyzed by the gas chromatograph with mass selective detector. Urinary 1-OHP levels were analyzed by the high performance liquid chromatograph with ultraviolet wavelength detector. For statistical estimation, t-test, ${\chi}^2$-test, analysis of variance, correlation analysis, arid regression analysis were executed by SPSS/PC (Windows version 10). The mean of environmental total PAHs was $87.8{\pm}7.81{\mu}g/m^3$. The mean concentration ($526.5{\pm}2.85{\mu}g/m^3$) of workers in steel-pipe coating industries using coal tar enamel was the higher than that ($17.5{\pm}3.36{\mu}g/m^3$) of workers in paint manufacture industries using coal tar paint. The mean of urinary 1-OHP concentration ($51.63{\pm}3.144{\mu}\;mol/mol$ creatinine) of workers in steel-pipe coating industries was the higher than that ($2.33{\pm}4.709{\mu}\;mol/mol$ creatinine) of workers in paint manufacture industries. The mean of urinary 1-OHP concentration of smokers was the higher than that of non-smokers. There was significant correlation between the urinary concentration of 1-OHP and the environmental concentration of PAHs (r=O.S48, p<0.001), pyrene(r=0.859, p<0.001), and urinary cotinine (r=0.324, p<0.05). The regression equation between the urinary concentration of 1-OHP in ${\mu}g/g$ creatinine($C_{1-OHP}$) and airborne concentration of PAHs (or pyrene) in ${\mu}g/m^3$ ($C_{PAHs}$ or Cpyrene) is: Log ($C_{1-OHP}$)=-0.650+0.889×Log($C_{PAHs}$), where $R^2=0.694$ and n=38 for p<0.001.Log ($C_{1-OHP}$)=1.087+0.707${\times}$Log(Cpyrene), where $R^2=0.713$ and n=38 for p<0.001. From the results of stepwise multiple regression analysis about 1-OHP, significant independents were total PAHs and urinary cotinine (adjusted $R^2=0.743$, p<0.001). In this study, there were significant correlation between the urinary concentration of 1-OHP and the airborne concentration of PAHs. The urinary 1-OHP was effective index as a biomarker of airborne PAHs in workplace. But it was influenced by non-occupational PAHs source, smoking.

• Journal of the Korean Society of Tobacco Science
• /
• v.24 no.1
• /
• pp.67-73
• /
• 2002

In light of addressing consumer health concern, coping with anti-tobacco movement, and promoting new product, tobacco industry is actively pursuing to make a new generation of cigarettes with low tar and nicotine deliveries, and less harmful substances. Low tar and low nicotine cigarettes increases their market shares dramatically world wide, especially in KT&G, multinational tobacco companies, EU countries, even in China regulated by CNTC to set up yearly target to lower tar and nicotine deliveries. On the other hand, to design a new cigarette with reduced harmful substances begins to gain speed. The "modified Hoffmann list" publishes thirty plus substances in tobacco leaf and main smoke stream, which is the prime suspect causing health problems. Various ways and means are developed to reduce such components including new tobacco breeds, new curing method, tobacco leaf treatment before processing, selected filtration system, innovated casing system to reduce free radicals, as well as some non conventional cigarette products. In TSRC held this year, the main topic is related to reduce tobacco specific nitrosamines in tobacco leaf. The new generation of cigarette is in the horizon. It still needs a lot help to produce commercial products with satisfied taste and aroma characters. The flavor industry is not regulated by many governments demanding which ingredients might or might not be for tobacco use. However, most of the cigarette companies self impose a list of ingredients to guide flavor suppliers to design flavors. Unfortunately, the number of ingredients in those lists is getting shorter every year. It is understandable that the health is not the only reason. Some cigarette companies are playing safe to protect the company from potential lawsuit, while others are just copying from their competitors. Moreover, it is obvious that it needs more assistance from casings and flavors to design new generation of cigarettes with missing certain flavor components in tobacco leaf and main smoke stream. These flavor components are either non-existed or at lower level at new form of cured tobacco leaf or filtered in the main smoke stream along with reduced harmful substances. The use of carbon filters and other selected filtration system poses another tough task for flavor system design. Specific flavor components are missing from the smoke analysis data, which brings a notion of "carbon taste" and "dryness" of mouth feel. It is ever more demanded by cigarette industry to flavor suppliers to produce flavors as body enhancer, tobacco notes, salivating agents, harshness reducer, and various of aromatic notes provided they are safe to use. Another trend is that water based flavor or flavor with reduced ethanol as solvent is gaining popularity. It is preferred by some cigarette companies that the flavor is compounded with all natural ingredients or all ingredients should he GMO free. The new generation of cigarettes demands many ways of new thinking process. It is also vital for tobacco industry. It reflects the real needs for the consumers that the cigarette product should be safe to use as well as bearing the taste and aroma characters smokers always enjoyed. An effective tobacco flavor system is definitely a part of the equation. The global trend of tobacco industry is like trends of any other industries lead by consumer needs, benefited with new technology availability, affected by the global economy, and subjected for various rules and regulations. Anti-tobacco organizations and media exceptionally scrutinize cigarette, as a legal commercial product. Cigarette is probably the most studied commercial product for its composition, structure, deliveries, effects, as well as its new developmental trend. Therefore, any new trend of cigarette development would be within these boundaries. This paper is trying to point out what it would be like for tobacco industry in the next few yews and what concerns the tobacco industry. It focuses mostly on the efforts to produce safer cigarettes. It is such a vital task for the tobacco industry and its affiliate industries such as cigarette papers, filters, flavors, and other materials. The facts and knowledge presented in this paper might be well known for the public. Some of the comments and predictions are very much personal opinion for a further discussion.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.27-38
• /
• 2009

To investigate the feasibility of refuse derived fuels (RDFs) combined of sewage sludge and combustible wastes such as substitutive fuels instead of a stone coal, several different RDFs made with different mixtures of sewage sludge and combustible wastes were analyzed by various experiments. The combustion characteristics for the RDFs were investigated by analyzing fuel gases, and heating values were also measured by a bomb calorimeter. The fundamental properties such as moisture contents, ratios of combustible materials, amounts of ashes, heavy metals, ratios of each chemical elements and heating values were analyzed in accordance with mixing ratios of wt(%) for researching the characteristics of the RDFs. $RDF_{k-1}$ was made of mixing materials which were dried sewage sludge, food wastes and combustible wastes. $RDF_{k-2}$ was made of mixing materials which were peat-moss, tar and sewage sludge. Combustion experiments were carried out at the optimal conditions which were m=2 under air-fuel condition and $850^{\circ}C$. The retention times in the combustor were set at 5, 10 and 15minutes. 50 g of RDFs was put in the combustor for each experiments. The ranges for heating values of $RDF_{k-1}$ with different mixing ratios were from 6,900 kcal/kg to 8120 kcal/kg. The ranges for heating values of $RDF_{k-2}$ with different mixing ratios were from 4,014 kcal/kg to 8,050 kcal/kg. As a result of this study, the heating values, moisture contents, components of chemical elements and mixing ratios of the materials in RDFs had big effects on the efficiency of the combustion. In $RDF_{k-1}$, the higher amounts of combustible wastes in the mixtures, the higher heating values, concentrations of $C_xH_y$ and amounts of ashes were produced. In $RDF_{k-2}$, the higher tar amounts in the mixtures caused the higher heating values, amounts of ashes, concentrations of CO gas and CxHy.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.1 s.53
• /
• pp.83-93
• /
• 2005

This study was conducted to evaluate the effect of additives in low sidestream cigarette papers, such as Mg$(OH)__2,\;TiO_2\;and\;KH_{2}PO_4$ on the delivery of mainstream and sidestream smoke. From the analysis of tar and nicotine in sidestream and mainstream smoke, the delivered ratios of tar and nicotine by sidestream to mainstream smoke in common cigarette paper were 5.32 and 8.60, respectively. However, the delivered ratios of those of the paper containing $Mg(OH)_2\;were\;2.25\~3.23,\;4.86\~7.14,\;Mg(OH)_2\;and\;KH_{2}PO_4\;were\;2.12\~2.92,\;4.67\~6.89,\;TiO_2\;was\;3.21,\;7.51 $ respectively. The deliver patterns of semi-volatile components in the cigarettes were similar each there, but a slight different pattern in the amount was observed depending on the kinds of compounds added in cigarette papers. In the cigarettes made of $Mg(OH)_2$ added paper, the aromatic components such as benzene, toluene and phenol were generated more while the aliphatic components like neophytadiene, ethyl decanoate were delivered less than the cigarettes made of common cigarette papers. However, the cigarettes manufactured with $Mg(OH)_2\;and\;KH_2PO_4$ added paper showed an opposite trend. The cigarettes made of $TiO_2$ added paper showed relatively low delivery in the most compounds measured. In sensory evaluation, cigarette papers tested were noticed a distinguishable sensory character between the low sidestream smokes with additive cigarette papers except $TiO_2$ added one. Moreover, aroma patterns detected by a electronic nose system in TPM were a similar tendency.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.129-132
• /
• 2008

The purposes of this study were to investigate the physicochemical properties and component values of bamboo oil from Phyllostachys nigra var. henonis obtained by refining process. The tar concentration in the refined bamboo oil (RBO) was decreased to about 78% compared to crude Bamboo oil (CBO). The chromaticities of light, red, and yellow in RBO were 92.4 and 3.0, respectively. This result indicates that the chromaticity of light was increased with the decrease in the tar concentration in the Bamboo oil. The total concentrations of organic acid and phenolics compound in RBO were decreased to about 63% and 80%, respectively. The total concentration of free sugars was decreased to about 78% in RBO and the concentration of free sugar was in the order of lactose, fructose, and glucose. The palmitoleic acid and stearic acid concentrations were higher than that of other fatty acids. The concentration of total organic acid was decreased to about 88% through RBO. Among the various organic acids, the formic acid concentration was highest in the RBO. The minerals concentrations in the CBO were in the order of Ca, K, Na, and Fe. On the other hand, in the case of RBO, it was in the order of Ca, Fe, K, and Na.

• Journal of Food Hygiene and Safety
• /
• v.21 no.3
• /
• pp.129-135
• /
• 2006

In order to provide fundamental data of food circulation policy, we performed monitoring the safety of the imported food which was circulating through Gwangju from March to October, 2005. Acid and peroxide value which are barometers for evaluation of the quality of lipid were investigated in 130 samples of imported oil treatment food. Not-permitted tar pigment and artificial sweetner were investigated in 139 candies by TLC and HPLC. The content of sulfur dioxide in 129 samples of dried fishery products and dried fruits was investigated by Monier-Williams method. In 130 samples of imported oil treatment food, 9 samples (6.9%) were incongruent with acid value, 6 samples (4.6%) with peroxide value and 4 samples (3.1%) with acid value simultaneously with peroxide value. In 139 imported candies, not-permitted artificial sweetner were found in 2 samples (1.4%). In 129 samples in which sulfur oxide was analyzed,4 samples (3.1%) were incongruent. Finally, in total 398 samples in which this study was analyzed, 25 samples (6.3%) were incongruent.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.200-206
• /
• 1996

Experiment was conducted to get the information about physico-chemical properties of flue-cured tobacco on the degree of maturity cultivated in paddy-upland rotated field, and compared to upland ones. For the samples of this experiment, 3~4 leaves at each stalk position were harvested from the bottom of plants. Physico-chemical properties of cured leaves were determined from the samples collected at weekly intervals, and of obtained from 4 stalk positions. For the degree of maturity, harvested leaves were separated with visual characters into four classes such as immature, mature, ripe, and mellow. Regardless of stalk position, the order of shrinkage rate with length and width of leaves was mellow> immature> ripe> mature, and ripe leaves from paddy field showed higher shrinkage rate than those of upland. Nicotine and total nitrogen contents were decreased with the degree of maturity while reducing sugar content were showed a reverse tendency. Ripe leaves from paddy field had lower reducing sugar contents, comparing with upland tobacco. Filling capacity of cured leaves from paddy field was decreased with degree of maturity, but there was no difference between upland and paddy tobacco. Shatter index was increased in the oeder of immature > mellow > mature > ripe. Chemical components of cigarette smoke from paddy field tobacco were little higher in $CO_2$ total particulate matter and tar contents, while combustibility was little lower than that of upland tobacco. It was also evaluated that paddy field tobacco was unfavorable for the non-volatile organic and higher fatty acids contents comparing with upland tobacco.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.9
• /
• pp.499-504
• /
• 2015

The composite anodes of expanded graphite (EG) and multiwall carbon nanotube (MWCNT) for microbial fuel cells were fabricated by using coal tar pitch (CTP) binder containing nickel (Ni), and the effect of the anodes with the binders on the performance of the MFCs were examined in a batch reactor. During the start-up of the MFCs, quick increase in voltage was observed after a short lag phase time, indicating that the CTP binder is biocompatible. The biomass attatched on the anode surface was more at higher Ni content in the binder, as well as at smaller amount of CTP binder for the fabrication of the anode. The internal resistance of the MFC was smaller for the anode with more biomass. Based on the results, the ideal combination of CTP and Ni for the CTP binder for anode was 2 g and 0.2 g, respectively. The maximum power density was $731.8mW/m^2$, which was higher 23.7% than the anode with Nafion binder as control. The CTP binder containing Ni for the fabrication of anode is a good alternative in terms of performance and economics of MFCs.

• Journal of Life Science
• /
• v.19 no.10
• /
• pp.1389-1395
• /
• 2009

Generally, it takes a long time to purify wood vinegar, and it contains toxic compounds such as tar, methanol, phenol and benzopyrene. To reduce the toxicity of wood vinegar itself, we have developed a new purification method of wood vinegar using an oxidation-cohesion reaction and distillation with an active carbon. We have investigated the physico-chemical change (pH, specific gravity, refractive index and dissolved tar), the change of amount of toxic compounds (carbonyl group, phenol, benzopyrene and residual solvents) and organic acids (formic acid (FA), acetic acid (AA), propionic acid (PA)) of the purified wood vinegar under the long term and accelerated storage conditions. Also, we have evaluated the effect of the purified wood vinegar on hair growth using an alopecia model of C57BL/6 mice. As a result, we could find out that the purified wood vinegar was stable and remained without decay under the storage conditions and benzopyrene, a carcinogenic agent, was not detected in the purified wood vinegar. After topical treatment of the purified wood vinegar solution or minoxidil (MXD) for 2 weeks to dorsal skin, the hair regrowth of the mice accelerated faster than that of the control, with no clinical signs. In conclusion, we could suggest a guideline for quality control of process to reduce the toxic compounds in wood vinegar and it might be a useful hair growth promoter in the treatment of baldness or alopecia.