• Journal of Mechanical Science and Technology
• /
• 제17권7호
• /
• pp.1044-1053
• /
• 2003

There are two major differences between the centerless infeed grinding process and the centerless through-feed grinding process. One is an axial movement of workpieces, and the other is that several workpieces are ground simultaneously and continuously by through-feeding. Because of these differences, through-feed ground parts inherently possess not only the roundness error but also the tapering error. The aims of the research reported in this paper are to examine this inherent tapering characteristic and to find the effects of grinding variables (center height angle, regulating wheel tilt angle, and shape of grinding wheel surface). To accomplish the objectives, experiments were carried out using two types of cylindrical workpiece shapes. Also, computer simulations were performed using the 3-D through-feed grinding model.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.70-77
• /
• 2003

The centerless through-feed grinding is performed by passing the workpiece between the grinding wheel and the regulating wheel. So, the amount of removed material around the leading end, of the workpiece is always more than that around the trailing end until the leading end leaves the grinding wheel. Because of this, there are differences in diameters along the workpiece axis during grinding, and workpiece axis is not parallel to the grinding wheel axis and the contact lines between the workpiece and wheels. Thus the ground workpiece shows tapering error inherently. To eliminate this error, the workpiece axis must be kept to be parallel to the grinding wheel axis. And, the direction of the workpiece axis can be controlled by the work-rest blade. Therefore, the effects of work-rest blade inclination angle on the through-feed centerless ground part are investigated in this study. As a result, it is found that there is a positive inclination angle of the work-rest blade for minimizing the tapering error of a ground workpiece.

• 전기전자학회논문지
• /
• 제28권1호
• /
• pp.110-115
• /
• 2024

본 논문은 3D NAND Flash memory에서 tapering된 O/N/O(Oxide/Nitride/Oxide) 구조와 blocking oxide를 ferroelectric material로 대체한 O/N/F(Oxide/Nitride/Ferroelectric) 구조의 V_th(Threshold Voltage) 변화량을 분석했다. Tapering 각도가 0°일 때 O/N/F 구조는 O/N/O 구조보다 저항이 작고 WL(Word-Line) 상부와 WL 하부의 V_th 변화량이 감소한다. Tapering된 3D NAND Flash memory는 WL 상부에서 WL 하부로 내려갈수록 channel 면적이 감소하며 channel 저항이 증가한다. 따라서 tapering 각도가 증가할수록 WL 상부의 V_th가 감소하고 WL 하부의 V_th는 증가한다. Tapering된 O/N/F 구조는 channel 반지름 길이와 비례하는 V_fe로 인해 WL 상부의 V_th는 O/N/O 구조보다 더 감소한다. 또한 O/N/F 구조의 WL 하부는 O/N/O 구조보다 V_th가 증가하기 때문에 tapering 각도에 따른 V_th 변화량이 O/N/O 구조보다 더 증가한다.

• Structural Engineering and Mechanics
• /
• 제67권4호
• /
• pp.347-358
• /
• 2018

The main aim of this research was to investigate the shear strength of non-prismatic steel fiber reinforced concrete beams under monotonic loading considering different parameters. Experimental program included tests on fifteen non-prismatic reinforced concrete beams divided into three groups. For the first and the second groups, different parameters were taken into consideration which are: steel fibers content, shear span to minimum depth ratio ($a/d_{min}$) and tapering angle (${\alpha}$). The third group was designed mainly to optimize the geometry of the non-prismatic concrete beams with the same concrete volume while the steel fiber ratio and the shear span were left constant in this group. The presence of steel fibers in concrete led to an increase in the load-carrying capacity in a range of 10.25%-103%. Also, the energy absorption capacity was increased due to the addition of steel fibers in a range of 18.17%-993.18% and the failure mode was changed from brittle to ductile. Tapering angle had a clear effect on the shear strength of test specimens. The increase in tapering angle from ($7^{\circ}$) to ($12^{\circ}$) caused an increase in the ultimate shear capacity for the test specimens. The maximum increase in ultimate load was 45.49%. The addition of steel fibers had a significant impact on the post-cracking behavior of the test specimens. Empirical equation for shear strength prediction at cracking limit state was proposed. The predicted cracking shear strength was in good agreement with the experimental findings.

• 전기전자학회논문지
• /
• 제25권4호
• /
• pp.770-773
• /
• 2021

본 논문에서는 tapering과 ferroelectric(HfO₂)구조가 적용된 3D NAND flash memory의 프로그램 이후 시간경과에 따른 retention특징을 분석했다. Nitride에 trap된 전자는 시간이 지남에 따라 lateral charge migration이 발생한다. 프로그램 이후 시간이 지남에 따라 trap된 전자가 tapering에 의해 두꺼워진 채널 쪽으로 lateral charge migration이 더 많이 발생하는 것을 확인했다. 또한 Oxide-Nitride-Ferroelectric (ONF) 구조는 polarization에 의해 lateral charge migration이 완화되기 때문에 기존 Oxide-Nitride-Oxide (ONO) 구조 보다 문턱전압(V_th)의 변화량이 줄어든다.

• 전자공학회논문지A
• /
• 제30A권8호
• /
• pp.81-87
• /
• 1993

The growth thickness uniformity of epitaxial layers deposited using a moiecular beam epitaxy system is calculated from the arrangement of molecular beam source and the substrate and the geometric dimensions of the crucible in order to predict the optimum design conditions of the prototype MBE system. The thickness uniformity better than 5% over a 3-inch wafer can be obtained by keeping the distance between the substrate and the crucible's orifice longer than 20cm, the tapering angle of the crucible larger than 6$^{\circ}$, and the angle between the normal to the substrate at the center and the crucible axis as larger as possible. In addition, the growth yield decreases to below 51% as the distance between the substrate and the orifice becomes longer than 25cm.

• 설비공학논문집
• /
• 제12권7호
• /
• pp.623-631
• /
• 2000

Effects of the taper angle and the angular velocity of a pulse tube on the enthalpy flow loss associated with the steady mass streaming were analysis by two-dimensional analysis of a pulse tube with variable cross-section. It was shown that the steady mass flux can lead to a large steady second-order temperature. The enthalpy flow loss associated with the steady mass streaming increases as the angular velocity increases. For a pulse tube where the viscous penetration depth is far thinner than the inner radius, the enthalpy flow loss can be significantly reduced by tapering the pulse tube since both the steady mass flux and the steady second-order temperature decrease as the taper angle increase.

• Structural Engineering and Mechanics
• /
• 제60권3호
• /
• pp.365-386
• /
• 2016

This paper describes a systematic numerical investigation into the nonlinear elastic behavior of conical shells, with various types of initial imperfections, subject to a uniformly distributed axial compression. Three different patterns of imperfections, including first axisymmetric linear bifurcation mode, first non-axisymmetric linear bifurcation mode, and weld depression are studied using geometrically nonlinear finite element analysis. Effects of each imperfection shape and tapering angle on imperfection sensitivity curves are investigated and the lower bound curve is determined. Finally, an empirical lower bound relation is proposed for hand calculation in the buckling design of conical shells.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.668-676
• /
• 2000

A two-dimensional model for pulse tubes with tapered cross-section was proposed. Net enthalpy flow and steady mass streaming were investigated by two-dimensional analysis of mass, momentum and energy equations of the gas as well as energy conservation of the tube wall. Steady mass flux profiles show good agreement with the previous approximate solution. It was shown that steady mass streaming can be reduced by tapering a pulse tube and by increasing the length of a pulse tube. Effects of the velocity phase angle and frequency on steady mass streaming were shown.

• 한국전자파학회논문지
• /
• 제16권9호
• /
• pp.883-892
• /
• 2005

본 논문에서는 T자형의 방사체를 가지는 초광대역 평면형 모노폴 안테나를 제안하고, 방사체와 그라운드 표면에 흐르는 전류 분포를 분석하였다. 측정된 임피던스 대역폭은 VSWR 2 미만 기준으로 3.1${\~}$11 GHz이고, 이는 UWB 대역을 만족한다. 제안된 안테나의 주파수에 따른 표면 전류 분포를 분석하여 제안된 안테나는 두개의 90도 굽은 비대칭적인 다이폴이 대칭으로 놓여 있는 안테나로 동작함을 설명하였다. 이 안테나의 표면 전류 분포가 방사 패턴에 영향을 미치는 양상이 다이폴의 경우와 유사하며, 그라운드 평면의 길이와 너비는 다이폴의 굵기와 길이에 해당한다. 이러한 해석이 다른 일반적인 평면형 모노폴 안테나에도 적용 가능함을 보였다. 끝으로 그라운드 평면의 모서리를 테이퍼링을 하여 공진 주파수를 낮추는 예과 방사체에 역 U자 슬랏을 추가하여 특정 대역을 저지하는 예를 제시하고 이를 표면 전류를 이용하여 설명하였다.