• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.643-648
• /
• 2004

This paper is dedicated to the thermoelastic modeling and dynamic response of the rotating blades made of functionally graded ceramic-metal based materials. The blades modeled as non-uniform thin walled beams fixed at the hub with various selected values of setting angles and pre-twisted angles. In this study, the blade is rotating with a constant angular velocity and exposed to a steady temperature field as well as external excitation. Moreover, the effect of the temperature gradient through the blade thickness is considered. Material properties are graded in the thickness direction of the blade according to the volume fraction power law distribution. The numerical results highlight the effects of the volume fraction, temperature gradient, taper ratio, setting angle and pre-twisted angle on the dynamic response of bending-bending coupled beam characteristics are provided for the case of a biconvex cross section and pertinent conclusions are outlined.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권2호
• /
• pp.138-145
• /
• 2014

The initial configuration for 95-seat passenger regional turboprop aircraft, the so called KC950, was designed to meet the market requirements. This paper prescribes the initial design based upon aircraft design guidelines and compared the competitive aircraft configurations after considering the related FAR 25 regulations. More specifically, results of design describe how to select the fuselage cross-sectional area, how to layout the cabin, and how to determine the overall shape and physical dimension of the fuselage. Sizing of wing and empennage areas is estimated using empirical equations and tail volume coefficients in this design. Some design guidelines to determine wing sweep angle, taper ratio, incidence angle and location are also introduced.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.87-96
• /
• 1998

A numerical simulation was done to investigate the performance of thin wings in close vicinity to ground. The simulation is based on Vortex Lattice Method(VLM) and freely deforming wake elements are taken into account for a sudden acceleration case. The parameters covered in the simulation are angle of attack, aspect ratio, ground clearance, sweep angle and taper ratio. In addition, the effect of the wing endplate on the ground effect is included. The wing sections used for present computations are uncambered, cambered and S-types. The present computational results are compared with other published computational results and experimental data.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.161-166
• /
• 2003

The micro-extruding die is a die for manufacturing of fine-wire by extruding process. The fine-wire made from the micro-extruding can be effectively applied to fields of semiconductor parts and medical parts etc. It is predicted that the demand of fine-wire in industry is more and more increasing. In this study $\phi50\mu m$ micro-drill which is coated with diamond is used for drilling of super micro-hole sizes. For the machining of taper parts of entrance and exit, drill having $\phi50\mu\textrm{mm}$ inclination angle $20^{\circ}$and angle $30^{\circ}$ is used. This is useful for anti tool-breakage and excessive too-wear in drilling process. After micro-drilling, the polishing process by diamond abrasive and polishing wood s carried out for increasing surface roughness.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.976-982
• /
• 2005

This paper is dedicated to the thermoelastic modeling and dynamic response of the rotating blades made of functionally graded ceramic-metal based materials. The blades are modeled as non-uniform thin walled beams fixed at the hub with various selected values of setting angles and pre-twisted angles. In this study, the blade is rotating with a constant angular velocity and exposed to a steady temperature field as well as external excitation. Moreover, the effect of the temperature gradient through the blade thickness is considered. Material properties are graded in the thickness direction of the blade according to the volume fraction power law distribution. The numerical results highlight the effects of the volume fraction, temperature gradient, taper ratio, setting angle and pre-twisted angle on the dynamic response of bending-bending coupled beam characteristics and pertinent conclusions are outlined.

• 한국재료학회지
• /
• 제11권6호
• /
• pp.527-532
• /
• 2001

O$_2$plasma와 H(hfac)을 이용한 Cu 박막의 건식 식각을 조사하였다. 휘발성이 큰 Cu(hfac)$_2$와 $H_2O$를 탈착시키기 위하여 $O_2$ Plasma를 이용한 Cu 박막의 산화와 생성된 Cu 산화막을 H(hfac)과의 반응으로 제거하는 공정으로 식각을 수행하였다. Cu 박막의 식각율은 50-700 /min의 범위를 보였으며, 기판온도, H(hfac)/O$_2$ 유량비, plasma power에 따라 변하였다. Cu 박막의 식각율은 기판온도 215$^{\circ}C$보다 높은 온도구간에서 RF power가 증가함에 따라 증가하였고, 산화 공정과 H (hfac)과의 반응이 균형을 이루는 최적의 H (hfac)/O$_2$ 유량비는 1:1임을 확인하였다. Ti mask를 사용한 Cu Patterning은 유량비 1 : 1, 기판온도 25$0^{\circ}C$에서 실시하였고, 30$^{\circ}$외 taper slope를 갖는 등방성 etching profile을 얻을 수 있었다. Taper angle을 갖는 Cu 건식 patterning은 고해상도의 대면적 thin film transistor liquid-crystal(TFT-LCDs)를 위래 필요한 것으로써 기판온도, RF power, 유량비를 조절한 one-step 공정으로부터 성공적으로 얻을 수 있었다.

• Smart Structures and Systems
• /
• 제16권4호
• /
• pp.623-640
• /
• 2015

This paper presents techniques to harvest higher voltage from piezoelectric cantilever energy harvester by structural alteration. Three different energy harvesting structures are considered namely, stepped cantilever beam, stepped cantilever beam with rectangular and trapezoidal cavity. The analytical model of three energy harvesting structures are developed using Euler-Bernoulli beam theory. The thickness, position of the rectangular cavity and the taper angle of the trapezoidal cavity is found to shift the neutral axis away from the surface of the piezoelectric element which in turn increases the generated voltage. The performance of the energy harvesters is evaluated experimentally and is compared with regular piezoelectric cantilever energy harvester. The analytical and experimental investigations reveal that, the proposed energy harvesting structures generate higher output voltage as compared to the regular piezoelectric cantilever energy harvesting structure. This work suggests that through simple structural modifications higher energy can be harvested from the widely reported piezoelectric cantilever energy harvester.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.189-197
• /
• 1996

In this study, the crashworthiness analysis was carried out for the hat type section side rails which had an important role of absorbing the impact energy during frontal crash. In case of a tapered hat type section model, numerical simulation models and test models were designed with varing design variables; welding pitch, taper angle, initiator shape, initiator location. The effect of variation of the design variables was investigated by quasi-static and dynamic test and numerical simulation.

• 한국초전도ㆍ저온공학회논문지
• /
• 제3권2호
• /
• pp.69-76
• /
• 2001

Unsteady components of the second-order axial velocity and temperature within a tapered pulse tube were obtained by using a novel hybrid method of solution which combines an analytical solution with a numerical solution. The effects of operating frequency, taper angle and cold eng temperature on the unsteady components of the second-order axial velocity and temperature were shown. The unsteady component of the second-order mass flux had the amplitude of the same order as the steady component when the velocities at the ends of the pulse tube have only first-order components.

• 한국전기전자재료학회논문지
• /
• 제15권10호
• /
• pp.844-850
• /
• 2002

Linearly graded profiles on the field area oxide are frequently used in power integrated circuits to reduce the surface electric field when power devices are operated in forward or reverse blocking modes. It is shown here that tapered windows can be made using the difference of etch rates between the bottom and the top layer of TEOS film. Annealed TEOS films are etched at a lower rate than the TEOS film without annealing Process. The fast etching layer results in window walls having slopes in the range of 25$^{\circ}$∼ 80$^{\circ}$ with respect to the wafer surface. Taper etching technique by annealing the TEOS film applies to high voltage LDMOS, which is compatible with CMOS process, due to the minimum changes in both of design rules and thermal budget.