• Korean Journal of Materials Research
• /
• v.14 no.1
• /
• pp.59-66
• /
• 2004

In the present study, ceramic brake pads without fiber phases were manufactured by the low temperature heat treatment below$ 700 ^{\circ}C$. The manufacturing parameters of ceramic brake pads and those levels were investigated by the analysis results of signal-to-noise ratios, ANOVA based upon the Taguchi method. The ceramic brake pads prepared in the Mg experiment had a friction coefficient of 0.30～0.55 very close to the target coefficient (0.35～0.45) of commercial brake pads utilized in the automobiles. The frictional properties of ceramic brake pads could be stabilized with the adjustment of amounts of lubricating additives. The optimum preparation conditions as well as batch formulations for the fabrication of non-fibrous ceramic brake pads were finally determined using Taguchi method in this study.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.556-567
• /
• 1998

Robust design in industry is an approach to reducing performance variation of quality characteristic value in products and processes. Taguchi has used the signal-to-noise ratio(SN) to achieve the appropriate set of operating conditions where variability around target is low in the Taguchi parameter design. Taguchi has dealt with having constraints on both the mean and variability of a characteristic (the dual response problem) by combining information on both mean and variability into an SN. Many Statisticians criticize the Taguchi techniques of analysis, particularly those based on the SN. In this paper we propose a substantially simpler optimization procedure for robust design to solve the dual response problems without resorting to SN. Two examples illustrate this procedure. in the two different experimental design(product array, combined array) approaches.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.11a
• /
• pp.233-243
• /
• 2010

Mahalanobis Taguchi System (MTS) is a pattern information technology, which has been used in different diagnostic applications to make quantitative decisions by constructing a multivariative measurement scale using data analytic methods. In MTS approach, Mahalanobis distance (MD) is used to measure the degree of abnormality of patterns and principles of Taguchi methods are used to evaluate accuracy of predictions based on the scale constructed. The advantage of MD is that it takes into consideration the correlations between the variables and this consideration is very important in pattern analysis. The purpose of this study is constructing admission diagnosis system and define the effect of admission requirements for student's academic accomplishment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.379-382
• /
• 2004

Abrasive jet machining (AJM) has a large number of parameters such as powder flow rate, air pressure, diameter of abrasive, stand off distance, material hardness and fracture toughness, etc. It is not easy matter to control those parameter. To achieve high accurate machining, in this study, Taguchi method was used to select process parameters. The objective of the optimization was to get higher material removal rate (MRR). From the experiments and analysis, some process parameters were found to make efficient machining.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.436-439
• /
• 2007

This paper describes the optimization of PGS(Patterned Ground Shield) of 5.5 turns rectangular spiral inductor using Taguchi's method. PGS is decrease method of parasite component by silicon substrate among dielectric loss reduction method. By using the taguchi's method, each parameter is fixed upon that PGS high poison(A), slot spacing(B), strip width(C) and overlap turn number(D) of PGS design parameter. Then we verified that percentage contribution and design sensitivity analysis of each parameter and level by signal to noise ratio of larger-the-better type. We consider percentage contribution and design sensitivity of each parameter and level, and then verify that model of optimization for PGS is lower inductance decreasing ratio and higher Q-factor increasing ratio by EM simulation.

• Journal of Korean Society for Quality Management
• /
• v.26 no.4
• /
• pp.88-100
• /
• 1998

Robust design in industry is an a, pp.oach to reducing performance variation of quality characteristic value in products and processes. Taguchi has used the signal-to-noise raio(SN) to achieve the a, pp.opriate set of operating conditions where variablity around target is low in the Taguchi parameter design. Taguchi has dealt with having constraints on both the mean and variability of a characteristic (the dual response problem) by combining information on both mean and variability into an SN. Many Statisticians criticize the Taguchi techniques of analysis, particularly those based on the SN. In this paper we propose a substantially simpler optimization procedure for robust design to solve the dual response problems without resorting to SN. Two examples illustrate this procedure in the two different experimental design(product array, combined array) a, pp.oaches.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.5
• /
• pp.325-341
• /
• 2013

During the past several decades, the Taguchi robust design method has been widely used in various fields successfully. On the other hand, some researchers and practitioners have criticized the method with respect to the way of utilizing orthogonal arrays, the signal-to-noise ratio as a performance measure, data analysis methods, etc., and proposed alternative approaches to robust design. This paper introduces the Taguchi method first, evaluates the validity of the criticisms, and discusses advantages and disadvantages of each alternative. Finally, research issues to be addressed for effective robust design are presented.

• Steel and Composite Structures
• /
• v.28 no.4
• /
• pp.461-470
• /
• 2018

In this study, the effect of polyurethane foam filler, in addition to surface layer thickness and core material thickness, on vibration characteristics of sandwich structures was investigated. The manufacturing process was carried out according to the Taguchi method. The natural frequencies and damping ratios of the produced samples were determined experimentally for fixed-free boundary conditions. In addition, solid models were developed for test samples and their finite element analyses were performed with $ANSYS^{(R)}$ to obtain their natural frequencies and mode shapes. An acceptably good agreement was found with the comparison of experimental results with the numerically obtained ones. The most effective parameters on the vibration characteristics of the sandwich structure were determined by the Taguchi method.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.153-158
• /
• 2006

Nowadays, hollow upper-shaft of monobloc type has been considered for weight reduction and high quality in the automobile industry. To form the upper-shaft under tube cold extrusion, Taguchi method is applied to optimize the die design in this study. Taguchi method for optimum die design is to establish the optimal combination of design parameters and to reduce a number of experiments. Effect of parameters including the die relief, mandrel, die half angle is investigated and analyzed based on FEA analysis using a FEM commercial software MSC_Marc. Furthermore extrusion experiments have been performed to verify the results investigated in the FEM simulations.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.197-199
• /
• 2003

In this work, the Greitzer's B-parameter model is applied for analyzing the stall and surge characteristics. The four parameters in the model are highlighted in order to establish the influence of each parameter on the system. First of all, the governing equations of stall and surge behavior are solved numerically using fourth-order Runge-Kutta method. The Taguchi method is then used to analyze the results generated to obtain the extent of effects of the parameters on the system by varying the parameters in a series of combinations. Finally, a thorough analysis is carried out on the results generated from the Taguchi method and the graphs.