• Current Research on Agriculture and Life Sciences
• /
• v.29
• /
• pp.75-81
• /
• 2011

This study performed field examinations of a zero discharge and reuse system developed by Hong and Choi(2009). The system installed one of villages located in Hyoryeong-myeon, Gunwee-gun for the experiments. The zero discharge and reuse system consists of anoxic, FES (Ferrous Electricity System), Oxic, Cralifier processes for water treatments. The main feature of the system is to remove phosphorous by using Fe-ionizing module within the FES process. The water purification performances of the system were evaluated, while any defects for using the system were investigated through the field monitoring. It was found that the removal capacities of T-P, T-N, and BOD of the system meet the required water quality with outstanding performance from T-P by obtaining the results of over 90 % removal rates. The efficiency of T-P removal rate of the system found to be greatly influenced by whether using an automatic washing system to the Fe-ionizing module and conducting replacement of iron plate within a proper period.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.2
• /
• pp.173-181
• /
• 2011

This paper proposes photovoltaic thermal hybrid module to get the electrical and thermal performance of building integrated photovoltaic(BIPV) system. BIPV system is decreased the system efficiency because output of PV is decreased by the thermal rising on generating. In order to improve the efficiency of BIPV module, water cooling system is applied and generated thermal is used the warm water system. Water cooling system uses the flux control algorithm considering water temperature and power loss. Electrical and thermal performance of proposed photovoltaic thermal hybrid module is confirmed through the actual experiment and herby proved the valid of this paper.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.88-97
• /
• 1994

We describe the design, fabrication, and performance of the optical fiber-photodiode 1$\times$12 arry module using mesa-type InS10.53T GaS10.47TAS/INP 1$\times$12 PIN photodiode array. We fabricated the PIN PD array for high-speed optical fiber parallel data link optimizing quantum efficiency, operating speed sensitivity from the PIN-FET structure, and electrical AC crosstalk. For each element of the array, the diameter of the photodetective area is 80 $\mu$m, the diameter of the p-metal pad is 90 $\mu$m, and the photodiode seperation is 250 $\mu$m to use Si v-groove. Ground conductor line is placed around diodes and p-metal pads are formed in zigzag to reduce Ac capacitance coupling between array elements. The dark current (IS1dT) is I nA and the capacitance(CS1pDT) is 0.9 pF at -5 V. No signifcant variations of IS1dT and CPD from element to element in the array were observed. We calulated the coupling efficiency for 10/125 SMF and 50/125 GI MMF, and measured the responsivity of the PD array at the wavelength is 1.55 $\mu$ m. Responsivities are 0.93 A/W for SMF and 0.96 A/W for MMF. The optical fiber-PD array module is useful in numerous high speed digital and analog photonic system applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.87-92
• /
• 2009

In this paper, we designed and fabricated the active amplification block for the integrated antenna module. The fabricated amplification module have a proper gain and low noise figure in the band of AM/FM band, T-DMB band and GPS band, and show good isolation performance for each band. Manufactured circuits satisfied the gain performance 7 dB in AM band, 11 dB in FM band, 10 dB in T-DMB, and 17 dB in GPS band. The integrated amplification block was realized by 35 mm*35 mm size, and was shown as the same sensitivity performance as compared with a conventional reference antennas.

• Journal of the Korean Society for Heat Treatment
• /
• v.32 no.6
• /
• pp.270-274
• /
• 2019

In this study, simulation structure analysis was performed for the differential gear system for passenger cars as a prerequisite for the design of the balancing module. The differential gear system was modeled by using CATIA and simulation structure analysis was performed using ANSYS software. The material of the modeled differential gear system uses the mechanical properties of S45C (Q&T). In the structural analysis of the differential gear, the areas where the maximum stress and the maximum strain occurred can be identified. The maximum stress and maximum strain occurred in the pitch circle of the bevel gear. In evaluating the safety factor, it was found that sufficient safety factor was secured. Based on the analysis results for the differential gear, it is expected that it will be a good reference if we design the balancing module device.

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.3
• /
• pp.469-474
• /
• 2011

The Kauffman bracket skein module $K_t$(M) of a 3-manifold M becomes an algebra for t = -1. We prove that this algebra has no non-trivial nilpotent elements for M being the exterior of the twist knot in 3-sphere and, therefore, it is isomorphic to the $SL_2(\mathbb{C})$-character ring of the fundamental group of M. Our proof is based on some properties of Chebyshev polynomials.

• Korean Journal of Mathematics
• /
• v.18 no.3
• /
• pp.271-275
• /
• 2010

Let R be a commutative ring with identity, T(R) be the total quotient ring of R, and D be a ring such that $R{\subseteq}D{\subseteq}T(R)$ and D is a finite R-module. In this paper, we show that each regular ideal of R is finitely generated if and only if each regular ideal of D is finitely generated. This is a generalization of the Eakin-Nagata theorem that R is Noetherian if and only if D is Noetherian.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.266-269
• /
• 2008

Layered structure of the Korean terrestrial Digital Multimedia Broadcasting (TDMB) transmission system for multimedia broadcasting service is presented in this paper. We made a switching module which is called the Ensemble Remultiplexer. It is designed to remultiplex the Ensemble Transport Interface (ETI) for T-DMB service. This paper describes the remultiplexing process of the Ensemble Remultiplexer.

• Kyungpook Mathematical Journal
• /
• v.45 no.1
• /
• pp.131-135
• /
• 2005

Let an integral domain R be locally polynomial over an integral domain D and let R be a content module over D. We show that if D is a PVMD, then $$Cl_t(R){\sim_=}Cl_t(D)$$. This generalizes the polynomial case. We also show that R is a PVMD if and only if D is a PVMD if and only if $R_{N_v}$ is a PVMD.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.800-803
• /
• 2004

This paper describes the design and implementation of the T=1 protocol based on lava Card. The T=1 protocol implemented in this paper complies with ISO/IEC 7816 standard. Also, JCOS(Java Card Operating Systems) including the contactless card protocol conforms to Java Card 2.2.1 specification and is running on 32-bit ARM7/TDMI processor. The protocol stack proposed and implemented in this paper is easy to maintenance of protocol independently. To verify the T=1 protocol implemented in this paper we tested the T=1 protocol scenarios defined in ISO/IEC 7816-3 Annex A. And we tested using USIM(Universal Subscriber Identity Module) cards, which include the implemented T=1 protocol. The T=1 protocol was tested and passed all against the specification 3GPP TS 31.122, which was the Conformance Test Specification for USIM cards including the test suites of both transmission protocols.