• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.1-11
• /
• 2012

This paper describes the transmit/receive(T/R) module for the space based X-band active phased array radar. T/R module is the integrated module which is assembled by the transmitting and receiving RF semiconductor devices to enable the electronically beam steering of the phased array antenna and the key component of the SAR payload. T/R module can selectively receive the polarization signals by the switch according to the established technology but now the technological trend of the T/R module is to receive the horizontal and vertical polarization signal simultaneously. Therefore the research and development of the dual polarization receiving channel T/R module is actively in progress. In this study, as the prior research for the next generation SAR payload, the technological trend of the active phased array radar T/R module and the result of the preliminary design of the dual receiving channel T/R module were described.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.389-398
• /
• 2011

In this paper, the design and fabrication of a transmit/receive(T/R) module for Ka-band phased array radar is presented. A 5bit digital phase shifter and digital attenuator were used in common for both transmitter and receiver considering unique Ka-band characteristic. The circulator was excluded in the T/R module and was placed outside T/R module. The transmitting power per element antenna is designed to be about 1 W and the noise figure is designed to be below 8 dB. The designed T/R module RF part has a compact size of $5\;mm{\times}4\;mm{\times}57\;mm$. In order to implement the T/R module, MMICs used in T/R module was separately assessed before assembly of the designed T/R module. The transmitter of the fabricated T/R module shows about 1 W at 5 dBm unit module input power and the receiver shows a gain of about 20 dB and a noise figure of below 8 dB as expected in the design stage.

• Bulletin of the Korean Mathematical Society
• /
• v.32 no.2
• /
• pp.251-257
• /
• 1995

In the catagory of t-modules the Carlitz module C plays the role of $G_m$ in the category of group schemes. For a finite t-module G which corresponds to a finite group scheme, Taguchi [T] showed that Hom (G, C) is the "right" dual in the category of finite- t-modules which corresponds to the Cartier dual of a finite group scheme. In this paper we show that for Drinfeld modules (i.e., t-modules of dimension 1) of rank 2 there is a natural way of defining its dual by using the extension of drinfeld module by the Carlitz module which is in the same vein as defining the dual of an abelian varietiey by its $G_m$-extensions. Our results suggest that the extensions are the right objects to define the dual of arbitrary t-modules.t-modules.

• Kyungpook Mathematical Journal
• /
• v.53 no.3
• /
• pp.407-417
• /
• 2013

In this article, we characterize t-Pr$\ddot{u}$fer modules in the class of faithful multiplication modules. As a corollary, we also characterize Krull modules. Several properties of a $t$-invertible submodule of a faithful multiplication module are given.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.2
• /
• pp.62-67
• /
• 2011

In this paper, Multi Mode Receiver Module is designed in one H/W module for Multi-mode Digital Broadcasting. Multi mode means Digital TV, Mobile TV and Digital Radio on the Broadcasting. and T-DMB, DAB(+), ISDB-T and DVB-T standard. Our Module can receive various broadcasting signal such as ISDB-T, DVB-T and DAB. The Multi mode Receiver Module & demuxer was implemented using the one SoC Chip has good performances to receive the multi mode signals as well as standard interface such as SPI, to connect the main CPU Unit.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.729-732
• /
• 2002

This paper reports an experimental study around a module about forced air flow by blower($35{\times}35{\times}6mm^3$) in portable PC(10mm high, 200mm wide, and 235mm long). The channel inlet flow velocity has been varied between 0.26, 0.52 and 0.78m/s. The power input to the module is 4Wthis report, particular attention is directed to the fluid flow and adiabatic wall temperature($T_(ad)$) around a module which is under fluid mechanical and thermal influences of the module. The fluid flow around a module was visualized using PIV system. Liquid crystal thernography is used to determine the adiabatic wall temperature around a heated module on an acrylic board. Plots of $T_(ad)$ (or F) show marked effects of dispersion of thermal wake near the module.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.6
• /
• pp.369-375
• /
• 2017

In this paper, we present a self-adaptive software platform that enables an IoT gateway to perform autonomous operation considering IoT devices connected each other in resource-constrained environments. Based on the oneM2M device software platform publicly available, we have designed an additional part, called SAS (self-adaptive software) consisting of MAM (memory-aware module), NAM (network-aware module), BAM (battery-aware module), DAM (data-aware module), and DH (decision handler). A prototype system is implemented to show the feasibility of the proposed self-adaptive software architecture. Our proposed system demonstrates that it can adaptively adjust the operation of gateway and connected devices to their resource conditions under the desired service scenarios.

• Communications of the Korean Mathematical Society
• /
• v.10 no.3
• /
• pp.519-525
• /
• 1995

By using an exact sequence of extension groups corresponding to an isogeny of a Drinfeld module we investigate which extension classes are coming from Hom(G,C). In the last section of this paper an example was given where the connecting homomorphism can be explictly computed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.168-173
• /
• 2008

In this paper, we have designed transmit/receive Module for X band which can be applied to active phase array radar system. AESA(active electrically beam steered array) is able to transmit high power as like TWTA with composition of TH Module and steer a main beam faster than mechanically steering system. The proposed structure of T/R Module for X band is brick type for physical structure, common leg structure electrically and small size design as MCM(multi chip module). The results show that the characteristic of proposed T/R module can fully cover the specification of required military radar application.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.940-945
• /
• 2008

In this paper, we have designed the Brick Transmit/Receive Module for K-band which can be applied to active phase array radar system. The proposed structure of T/R Module for K band is brick type for MCM(Multi Chip Module) form and the satisfaction of tile type T/R Module can apply to structure of cavity and main characteristic. The fabricated brick type T/R Module confirmed the main characteristic for electrical goal performance in test and this structure can be applied to active phase array radar.