• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.21-24
• /
• 2011

Oil Tight Bulkhead (O. T. Bulkhead) is one of the most important structural members of oil tankers in the views of vessel's strength and safety. Therefore O.T. bulkhead's strength should be sufficient against relevant loadings, which is normally verified by local scantling requirement and structural strength analysis defined in CSR (Common Structure Rules for Double Hull Oil Tankers). However, there is a weak-able situation when the vertical stiffeners are cut due to the penetration of cargo pipes through O. T. Bulkhead. In addition, CSR does not define how to prove the strength of this case. Therefore it is necessary to verify the structural adequacy in case that several vertical stiffeners are discontinued. This article intends to prove the strength of O. T. Bulkhead with five (5) vertical stiffeners discontinued due to pipes' penetration using the grillage analysis and the finite element analysis and to provide proper reinforcement.

• Journal of Information Science Theory and Practice
• /
• v.10 no.2
• /
• pp.45-73
• /
• 2022

The research in the literature review on Internet of Things (IoT) adoption from an individual consumer viewpoint is minimal and has not yet been fully investigated. Therefore, the objectives of this study are to analyze the growth of IoT in recent years and to conduct a weight analysis of the factors that affect acceptance intentions and real usage of IoT-enabled services. For the review, we analyzed 87 publications from 13 conferences and 54 journals published during the period 2014-2020 about consumer adoption of IoT. Following the study, we discovered an unprecedented increase in the number of articles published in the last seven years, which points to an emerging area with an enormous prospect. Furthermore, the weight analysis outcome was associated with the diagrammatic representation in this study. After that, this research developed a generalized consumer IoT adoption model based on the 12 best predictors derived from frequency count and weight analysis, which had the highest predictive power for calculating IoT adoption. This paper further acknowledges the study's theoretical and practical contributions, as well as its shortcomings, and proposes further research directions for future researchers.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.366-371
• /
• 2007

In many CAD systems, NURBS has been employed to construct exact geometries. Recently, NURBS finite element analysis methods were proposed by some authors for convenient connection between CAD and finite element analysis. Additional advantages of NURBS FEA, such as exact geometry and no mesh generation, are obtained. However, NURBS is inefficient in local refinement and merging patches. For refinement of local region in interest, additional control points should be inserted into the entire row or column which contains the local region. There is another inefficiency of NURBS during merging patches into a large structure due to propagation of control points. In order to overcome these inefficiencies of NURBS, T-spline was proposed by Sederberg. In this work, T-spline based finite element method is proposed for efficient local refinement and merging patches. At first, accuracy and efficiency of NURBS FEA is verified and efficiency of T-spline FEA is verified by comparing with NURBS FEA.

• Journal of Acupuncture Research
• /
• v.21 no.1
• /
• pp.176-188
• /
• 2004

This study was carried out to investigate statistical validity of medical articles that used various statistical techniques such as t-test, analysis of variance, correlation analysis, regression analysis and chi-square test. For study 429 original articles using those statistical methods were selected from Journal of Korean Acupuncture & Moxibusition Society published from 1984 to 2002. 429 original articles were reviewed to analyzed the statistical procedures. Results are summarized as follows : 1. In this study 93 articles(21.68%) of 429 ones didn't report statement of statistical method in detail. 2. 53 articles(12.53%) didn't report p-value in correctly, and 245 articles(57.11 %) used mean${\pm}$standard error (Mean${\pm}$SEM.) and 109 articles used mean${\pm}$standard deviation(Mean${\pm}$SD.). All of 23 articles using nonparametric statistical techniques made an error to central tendency or dispersion. 3. 175 articles(59.93%) and 14 articles(4.79%) of 292 ones made an error to description of equal variances and normal distribution. 4. 99 articles(50%) of 185 ones misused t-test and 4 articles of 5 ones misused chi-square test. 5. 28 articles(73.68%) of 38 ones using discrete variable misused parametric technique such as t-test or ANOVA. 2 articles and 1 article of 125 ones choosing paired samples misused independent t-test and Mann-Whitney U test. 6. 20 articles using analysis of variance didn't use multiple comparison.

• International Journal of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.24-28
• /
• 2017

In the Internet of Things (IoT), resource-limited smart devices communicate with each other while performing sensing and computation tasks. Thus, these devices can be exposed to various attacks being launched and spread through network. For instance, attacker can reuse the codes of IoT devices for malicious activity executions. In the sense that attacker can craft malicious codes by skillfully reusing codes stored in IoT devices, code-reuse attacks are generally considered to be dangerous. Although a variety of schemes have been proposed to defend against code-reuse attacks, code randomization is regarded as a representative defense technique against code-reuse attacks. Indeed, many research have been done on code randomization technique, however, there are little work on analysis of the interactions between code randomization defenses and code-reuse attacks although it is imperative problem to be explored. To provide the better understanding of these interactions in IoT, we analyze how code randomization defends against code-reuse attacks in IoT and perform simulation on it. Both analysis and simulation results show that the more frequently code randomizations occur, the less frequently code-reuse attacks succeed.

• Advances in aircraft and spacecraft science
• /
• v.5 no.3
• /
• pp.385-400
• /
• 2018

In this paper dynamic behavior (modal analysis and dynamic transient response) of a novel sandwich T-joint is numerically and experimentally investigated. An epoxy adhesive is selected for bonding purpose and making the step wise graded behavior of adhesive region. The effect of the step graded behavior of the adhesive zone on dynamic behavior of a sandwich T-joint is numerically studied. Finite element analysis (FEA) of the T-joints with carbon fiber reinforced polymer (CFRP) face-sheets is performed by ABAQUS 6.12-1 FEM code software. Modal analysis and dynamic half-sine transient response of the sandwich T-joint are presented in this paper. Two verification processes employed to verify the dynamic modeling of the manufactured sandwich panels and T-joint modeling. It has been shown that the step wise graded adhesive zone cases have changed the second natural frequency by about 5%. Also, it has been shown that the different arranges in the step wise graded adhesive zone significantly affect the maximum stresses due to transient dynamic loading by 1112% decrease in maximum peel stress and 691.9% decrease in maximum shear stress on the adhesive region.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.250-260
• /
• 2023

In this paper, we designed a IoT(Internet of Things) sensor block embedded lightweight house deck structures that can be implemented using Carbon Fiber Reinforced Polymer(CFRP). Deck-Sensor interconnection interface block via IoT connectivity Hub that can mount external environmental sensors such as fire sensors on the Deck body itself was also proposed. Additionally we described the configuration of devices for data acquisition and analysis based on IoT environmental detection sensors that can be commonly installed and used on these deck bodies. On the other hand, received sensing data based monitoring user interface(UI) also developed and used for sensing data analysis for remote monitoring center. Through the implementation of such IoT-based sensor data transmission and collection analysis devices and UI software, this paper confirmed the availability of CFRP based lightweight House deck structure and possibility of CFRP deck-based IoT sensor data networking and analysis functions.

• Analytical Science and Technology
• /
• v.14 no.3
• /
• pp.238-243
• /
• 2001

The study was carried out to analysis of the pollutant $COD_{Mn}$, T-N, T-P for water quality proximated to sediment in lake of K river basin. water extracted from sediment showed higher $COD_{Mn}$, T-N, T-P datas than water proximated to sediment. Also, water proximated to sediment and water 5-10cm proximated to sediment showed the following data : $COD_{Mn}$, 1.2~1.9mg/L, T-N, 1.3~6.2mg/L, TP, 0.05~0.26mg/L, respectively. From this results, we have known the fact that the pollution degree of sediment have an effect on the water quality in lake and stream.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.3 s.70
• /
• pp.315-324
• /
• 2004

This study performs a yield line analysis of welded T-joints in cold-formed Square Hollow Sections (SHS) with the branch in axial compression. The existing yield line models proposed by Koto, Packer, Zhao, and CIDECT and the proposed yield line model of the previous study are compared, using the existing test results of welded T-joints in cold-formed SHS. The yield line model suggested in the previous paper, which is based on the simplified yield line analysis, is reviewed to evaluate its application limit on cold-formed SHS T-joints. In the proposed model, the round corner of the cold-formed SHS section and weld size are taken into account. Finally, the validity range of yield line analysis is determined by observing the actual failure modes and comparing the test value with the analysis value, set as ${\beta}^{\prime}{\leq}0.8$ where ${\beta}^{\prime}=0.8$, ${\beta}^{\prime}=b_1^{\prime}/b_0^{\prime}$, $b_1{^{\prime}}=b_1+t_0$ and $b_0{^{\prime}}=b_0-t_0$.

• Microbiology and Biotechnology Letters
• /
• v.42 no.2
• /
• pp.121-130
• /
• 2014

Terminal Restriction Fragment Length Polymorphism (T-RFLP) analysis was adopted to explore rapid differentiation in the diversity and dynamics of bacteria in kimchi made in Korea and China for future application in kimchi origin discrimination. T-RFLP analysis supported the reproducible and rapid detection of major lactic acid bacteria known to be involved in kimchi fermentation. The taxonomic resolution level of this T-RFLP analysis was between the species and genus level, but was not specific enough for the detection of a bacterium found only in one origin, either Korea or China. The bacterial community structure successions in kimchi samples from Korea and China analyzed by T-RFLP analysis occurred with a similar pattern. Bacillus spp. which were not detected in the early microbial studies of kimchi were constantly detected until the late fermentation stage of kimchi in our T-RFLP analysis and their existence was proved by culture-based identification. Additionally, sporulation of Bacillus spp. during kimchi fermentation was discovered.