Application limit of Yield Line Analysis on Welded T-joints in Cold-Formed SHS Sections

냉간성형 각형강관 T형 접합부의 항복선해석 전용한계

  • Received : 2004.03.15
  • Accepted : 2004.05.24
  • Published : 2004.06.27

Abstract

This study performs a yield line analysis of welded T-joints in cold-formed Square Hollow Sections (SHS) with the branch in axial compression. The existing yield line models proposed by Koto, Packer, Zhao, and CIDECT and the proposed yield line model of the previous study are compared, using the existing test results of welded T-joints in cold-formed SHS. The yield line model suggested in the previous paper, which is based on the simplified yield line analysis, is reviewed to evaluate its application limit on cold-formed SHS T-joints. In the proposed model, the round corner of the cold-formed SHS section and weld size are taken into account. Finally, the validity range of yield line analysis is determined by observing the actual failure modes and comparing the test value with the analysis value, set as ${\beta}^{\prime}{\leq}0.8$ where ${\beta}^{\prime}=0.8$, ${\beta}^{\prime}=b_1^{\prime}/b_0^{\prime}$, $b_1{^{\prime}}=b_1+t_0$ and $b_0{^{\prime}}=b_0-t_0$.

본 논문은 지관에 압축력을 받는 냉간성형 각형강관 T형 용접접합부의항복선 해석에 관한 연구이다. 기존 연구 중 냉간성형 정방형 각형강관 T형 용접 접합부만을 포함하는 실험결과와 Kato, Packer, Zhao, CIDECT 및 본 연구진들의 제안식을 비교하였다. 제안된 항복선 모델의 적용한계치를 제안하기 위하여, 항복선 해석에 기초하여 이전 논문에서 제안된 항복선모델을 재검토하였다. 제안된 항복선 모델은 냉간성형 각형강관 곡률부와 용접크기를 고려한다. 마지막으로, 실험상의 실체 파괴모드와 해석상의 비교결과를 참조하여, 항복선 해석의 적용범위를 ${\beta}^{\prime}{\leq}0.8$로 제안하였다. 여기서, ${\beta}^{\prime}=0.8$, ${\beta}^{\prime}=b_1^{\prime}/b_0^{\prime}$, $b_1{^{\prime}}=b_1+t_0$, $b_0{^{\prime}}=b_0-t_0$.

Keywords

References

  1. 한국강구조학회논문집 v.14 no.2 냉간성형 각형강관 모살용접 T형 접합부의 최대내력(I) - 주관 플랜지 파괴모드 - 배규웅;박금성;강창훈;문태섭
  2. 한국강구조학회논문집 v.14 no.3 냉간성형 각형강관 모살용접 T형 접합부의 최대내력(II) - 주관 웨브 파괴모드 - 배규웅;박금성;강창훈;문태섭
  3. 한국강구조학회논문집 v.14 no.5 지관이 회전된 냉간성형 각형강관 T형 접합부의 최대내력(I) - 주관 플랜지파괴모드 - 배규웅;박금성;강창훈;문태섭
  4. 한국강구조학회논문집 v.15 no.1 지관이 회전된 냉간성형 각형강관 T형 접합부의 최대내력(II) - 주관 웨브 파괴모드 - 배규웅;박금성;강창훈;문태섭
  5. The strength and behavior of statically loaded welded connections in structural hollow sections, monograph No.6 CIDECT
  6. XXVI Scientific Conference of the Civil and Hydraulic Engineering Strength of cross joints in rectangular hollow sections Brodka, J.;Szlendak, J.
  7. Proceedings of the 5th international conference on cold-formed steel structures T-joints made of rectangular tubes Kato, B.;Nishiyama, I.
  8. Journal of Structural Engineering, ASCE v.108 no.9 Finite element analysis of RHS T-joints Korol, R.M.;Mirza, F.A.
  9. Journal of Constructional Steel Research v.59 no.4 A finite element method based yield load determination procedure for hollow structural section connections Kosteski, N.;Packer, J.A.;Puthli, R.S.
  10. Deformation limit for the ultimate strength of hollow section joints. Tubular structures VI Lu, L.H.;de Winkel, G.D.;Yu, Y.;Wardenier, J.
  11. Canadian Journal of Civil Engineering v.9 Predicting the strength of branch plate-RHS connections for punching shear Packer, J.A.;Davies, G.
  12. OTC Proceeding v.1 Ultimate capacity equations for tubular joints Yura, J.A.;Zettlemoyer, N.;Edwards, I.F.
  13. Journal of Structural Engineering, ASCE v.117 no.8 T-joints in rectangular hollow sections subject to combined actions Zhao, X.L.;Hancock, G.J.
  14. Journal of Constructional Steel Research v.53 no.2 Deformation limit and ultimate strength of welded T-joints in cold-formed RHS sections Zhao, X.L.