• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.7
• /
• pp.508-512
• /
• 2016

This paper discusses a Takagi-Sugeno (T-S) fuzzy controller design problem for a phugoid model-based multi-agent system. The error between the state of a phugoid model and a reference is defined to construct a multi-agent system model. A T-S fuzzy model of the multi-agent system is built by introducing a nonlinear controller. A fuzzy controller is then designed to stabilize the T-S fuzzy model, where the synthesis condition is represented in terms of linear matrix inequalities.

• Natural Product Sciences
• /
• v.4 no.4
• /
• pp.234-237
• /
• 1998

To evaluate the anti-diarrheal potential of the leaves of Bauhinia purpurea Linn., investigations were performed on different animal models e.g. castor oil induced diarrhea in rats and gastrointestinal motility test by using charcoal meal. In both the models the ethanolic extract of the leaves showed significant activity when compared to control group. The group treated with standard anti-diarrheal agent also showed significant activity comparing with control. Thus this study establishes the efficacy of Bauhinia purpurea Linn. Leaves as an anti-diarrheal as claimed in folklore.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.147-149
• /
• 1999

This paper deals with the determination of generator/exciter model parameters for a Cheju Hanlim steam turbine unit. Using the recorded data from the generator characteristic tests, the model parameters have been derived and verified by comparing the simulation results and recorded data. In addition to it, the closed-loop performance of voltage control on no-load condition has been assessed in the frequency domain by taking advantage of derived generator/exciter model parameters.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.702-709
• /
• 2004

Modified Gurson model (Gurson-Tvergaard-Needleman model) was used to analyze crack growth in M(T) and C(T) specimens. A commercial finite element code ABAQUS/Explicit is used to account for total failure of material point by cavity coalescence, and crack growth was simulated by finite element extinction. Crack growth resistance curve was obtained by calculating J-integral. Crack growth under residual stress was investigated.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.184-188
• /
• 2001

In this paper, a new fully digital control method for single-phase UPS inverter, which is based on the double control loop such as the outer voltage control loop and inner current control loop, is proposed. The inner current control loop is designed and implemented in the form of internal model control and takes the presence of computational time-delay into account. Therefore, this method provides an overshoot-free reference-to-output response. In the proposed scheme, the outer voltage control loop employing P controller with resonance model implemented by a DSP is introduced. The proposed resonance model has an infinite gain at resonant frequency, and it exhibits a function similar to an integrator for AC component. Thus the outer voltage control loop causes no steady state error as regard to both magnitude and phase. The effectiveness of the proposed control system has been demonstrated by the simulation and experimental results respectively.

• Journal of Applied Reliability
• /
• v.13 no.2
• /
• pp.117-127
• /
• 2013

In this paper, we studied the correlation between the activation energy($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. The samples used in the study were composed of low power LED 3type and high power LED 5type. To calculate the activation energy($E_a$) of the White LED PKGs conducted three conditions of high temperature operation test based on the Arrhenius model. The number of samples used in the experiment is 10, respectively. The $T_j$ of Conditions and target specifics expressed $T_{j1}$, $T_{j2}$, $T_{j3}$. The activation energy ($E_a$) of the samples was calculated based on the value of the actually measured lifetime. We investigated the correlation between the activation energy ($E_a$) of the raw materials and the structural characteristics of the White LED PKGs. As a result, White LED PKGs activation energy($E_a$) value was confirmed that the material properties affected more than the structural characteristics of the LED PKGs and we found that activation energy of each LED Model has difference. Normally, The activation energy of phosphor of YAG type was indicated from 0.21 to 0.25[eV] and Silicate type was indicated from 0.12 to 0.16[eV]. According to the results, we confirmed that the activation energy of phosphor of YAG type is higher more than The activation energy of phosphor of Silicate type.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4199-4204
• /
• 2011

Using models simulating the environment of two distinct adsorption sites of $H_2$ in metal-organic framework-5 (MOF-5), binding energies of $H_2$ to MOF-5 were evaluated at the MP2 and CCSD(T) level. For organic linker section modeled as dilithium 1,4-benzenedicarboxylate ($C_6H_4(COO)_2Li_2$), the MP2 and CCSD(T) basis set limit binding energies are estimated to be 5.1 and 4.4 kJ/mol, respectively. For metal oxide cluster section modeled as $Zn_4O(CO_2H)_6$, while the MP2 basis set limit binding energy estimate amounts to 5.4 kJ/mol, CCSD(T) correction to the MP2 results is shown to be insignificant with basis sets of small size. Substitution of benzene ring with pyrazine ring in the model for the organic linker section in MOF-5 is shown to decrease the $H_2$ binding energy noticeably at both the MP2 and CCSD(T) level, in contrast to the previous study based on DFT calculation results which manifested substantial increase of $H_2$ binding energies upon substitution of benzene ring with pyrazine ring in the similar model.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.509-516
• /
• 2003

Growth curves were estimated for 1083 female Korean cattle raised in Daekwanryeong branch, National Livestock Research Institute (NLRI). Comparisons were made among various growth curve models for goodness of fit for the growth of the cows. Estimated growth curve functions were $W_t=370.2e^{-2.208e^{-0.00327t}$ for Gompertz model, for von Bertalanffy model, and $W_t=341.2(1+5.652e^{-0.00524t})^{-1}$ for Logistic model. Ages at inflection estimated from Gompertz model, von Bertalanffy model and Logistic model were 242.2 days, 191.5 days, and 330.5 days respectively, body weight at inflection were 136kg, 115kg, and 170kg, and daily gain at inflection were 0.445kg, 0.451kg, and 0.446kg. The predicted weights by ages from Gompertz model, von Bertalanffy model, and Logistic model were onsistently overestimated at birth weight and underestimated at 36 month weight. The von Bertalanffy model which had a variable point of inflection fit the data best.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1280-1288
• /
• 2018

In this work, we pointed out that Sr substitution for Ca leads to modify the magnetic and magnetocaloric properties of $Pr_{0.7}Ca_{0.3-x}Sr_xMnO_3$ compounds. Analyzing temperature dependence of magnetization, M(T), proves that the Curie temperature ($T_C$) increased with increasing Sr content (x); $T_C$ value is found to be 130-260 K for x = 0.0-0.3, respectively. Using the phenomenological model and M(T,H) data measured at several applied magnetic field, the magnetocaloric effect of $Pr_{0.7}Ca_{0.3-x}Sr_xMnO_3$ compounds has been investigated through their temperature and magnetic field dependences of magnetic entropy change ${\Delta}S_m$(T,H) and the change of the specific heat change ${\Delta}C_P$(T,H). Under an applied magnetic field change of 10 kOe, the maximum value of $-{\Delta}S_m$ is found to be about $3J/kg{\cdot}K$, and the maximum and minimum values of ${\Delta}C_P$(T) calculated to be about ${\pm}60J/kg{\cdot}K$ for x = 0.3 sample. Additionally, the critical behaviors of $Pr_{0.7}Ca_{0.3-x}Sr_xMnO_3$ compounds around their $T_C$ have been also analyzed. Results suggested a coexistence of the ferromagnetic short- and long-range interactions in samples. Moreover, Sr-doping favors establishing the short-range interactions.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.11
• /
• pp.916-921
• /
• 2002

We presents a new method of constructing an equivalent T-S fuzzy model by using the sum of products of linearly independent scalar functions from nonlinear dynamics. This method exactly expresses nonlinear systems and automatically determines the number of rules. We design a stabilizing controller f3r ul inverted pendulum system by using the concep of parallel distributed compensation (PDC) and linear matrix inequalities (LMIs) based on the proposed T-S fuzzy modeling method. We show effectiveness of a systematically designed fuzzy controller based on the proposed T-S fuzzy modeling method through the simulation and experiment of an inverted pendulum system.