• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.130-135
• /
• 2010

In this study, the performance improvement of epoxy resin system had been tried by the improvement of particle size distribution and globularization of filler using polymerization method. From the results of particle size distribution measurement, the polydispersity value of reformed filler was 1.04 and that of silica flour before reformation was 2.6, it could be confirmed that the particle size uniformity of reformed filler had been improved greatly and the shape of particle was globular. Compatibility between monomer and silica was improved remarkably with the silanization pretreatment of silica flour. From the results of degree of crosslinking test, it could be confirmed that the binding structure of reformed filler was 3-dimensional net structure. And it could be also confirmed that the fluidness was improved at the casting of epoxy resin with reformed filler. From the above results, it could be concluded that the reformation of filler with the improvement of particle size distribution and globularization was very successful method to improve the performance of cast epoxy resin system.

• Journal of Korean Society of Rural Planning
• /
• v.28 no.4
• /
• pp.55-67
• /
• 2022

In this study, the village development promotion system was reorganized for Gimhae-si, and improvement plans and post-operation management plans were prepared through expert surveys. Through the Village Development Project, the landscape and environment of the village were improved, and the village and residents were positively changed. The Village Development Project laid the foundation for regional revitalization, giving the next generation hope for the sustainable development of the village. While maintaining the framework of the existing Rural Development Projects guidelines through case analysis of other regions, we operate educational programs for each stage by reflecting regional characteristics, and utilize and communicate with intermediate support organizations, systematically operate, and actively intervene by Eup·Myeon administration. In addition, as a follow-up management program, various follow-up management programs were being operated, such as support for capacity building such as consulting, as well as facility maintenance and support for village managers. As a result of the expert survey to review the adequacy of the improvement plan, the improvement plan derived from the overall average of 4.28 points and the standard deviation of 0 to 0.94 points for the process is judged to be appropriate. In particular, the item of 'self-reliance stage follow-up management' was very important as all experts responded with 5 points. By establishing the village development performance goals, we tried to check whether the qualitative/quantitative goals were achieved by year, and to secure quantified status data in response to changes such as resetting performance goals or adding new performance indicators. In this study, in order to improve the capacity to achieve regional development in response to the rural agreement, we prepared our own sustainable village development promotion system, governance establishment, and follow-up management plan. In addition, it is expected to be used as a reference material for the selection of new districts and the follow-up management of completed districts by establishing the village development goals.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2155-2158
• /
• 1997

This paper describes the performance improvement of dc TIG (Tungsten Inert Gas) welder. The TIG welder consists of single phase full bridge IGBT inverter which incorporates the high frequency transformer, the boost converter for improving the input power factor, and the arc start system. The arc will be generated without fail even when the extension cable between the torch and the power source is 100m long. In addition, the arc start system with a short dc output voltage will generate less EMI noise than the traditional arc start system with a high frequency output voltage. To demonstrate the practical significance of the proposed methods, some simulation studies are presented.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.377-380
• /
• 2002

Wetland systems are widely accepted natural water purification systems around the world in nonpoint sources pollution control. In this study, the field experiment to reduce nonpoint source pollution loadings from agricultural drainage and polluted stream waters using wetland and pond system was performed. The removal rate of $BOD_5$, TSS, TN, TP, and $Chl-{\alpha}$ was 52%, 90%, 56%, 59%, and 81%, respectively. Performance of the experimental system was compared with existing data base (NADB), and it was within the range of general system performance. Overall the water quality improvement was apparent in wetland and pond system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.639-644
• /
• 2001

Sequence Code Division Multiple Access) and TDMA(Time Division Multiple Access) system. In this system, the narrowband TDMA signals can cause intolerant interferences to CDMA signals. In this paper, DS-CDMA/TDMA frequency sharing system have been analyzed in AWGN(Additive white Gaussian Noise), MAI (Multi Access Interference) and NI(Narrowband Interference) environment. Also, performance improvement has been obtained by adopting an adaptive notch filtering scheme using complex filter bank and CCI canceller.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.84-93
• /
• 2004

This study carries out the performance improvement and simplification of hydraulic modulator that plays an important role in vehicle stability control systems. The mathematical models for each component of a modulator, such as pump, wheel cylinder, check and solenoid valve, accumulator, damper are derived in detail. All the mathematical models are combined to form a modulator system and implemented through a computer program, which can be controlled by a user friendly GUI. To verity the simulation, comparison between simulation and experiments has been made. After the verification of the validity of the simulation, the effects of the design parameters of the modulator on the wheel cylinder pressure is investigated. The results show that the modulator without MPA has advantage in early time pressure rise rate, and it can be simplified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.3
• /
• pp.365-370
• /
• 2016

Recently, There are increasing number of studies that apply multi-carrier method, a land mobile communication method, to underwater channel environment in order to enhance the performance of underwater communication. Therefore, in this paper, in order to design a new system with improved communication performance compared to the multi-carrier method in underwater communication, we present that the RS(Resource Spreading) FMT-OFDM system has a diversity and repetition effect from resource spreading. Moreover, we verify the performance of RS FMT-OFDM system and existing FMT-OFDM system through simulations after modeling communication channels and setting the system parameter based on the data measured from the real sea. Our result indicate that, compared to the existing FMT-OFDM system, there has been an improvement in communication performance by 12dB based on BER $10^{-3}$ we also discovered that communication performance improves as the resource spreading rate increases.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2021

The type approval system for railway vehicle has been in effect since 2016 in order to establish a regular safety management system to secure railway safety and enhance the technological competitiveness of the railway industry, abolished the conventional performance test system through the reform of the Railroad Safety Act in 2012. Until now, there has been appreciated it has been making significant contributions to railway safety and industry of operation and manufacturing companies, taking their place in accordance with the implementation of the system. But there has been no case of quantitative analysis on the effectiveness of the actual system. In this study, in order to examine the full-scale performance of the approval system and quantitatively analyze effectiveness, we identified and defined the relationships with the major elements of the type approval system based on system thinking principle and determined the calculated outcomes to relevant stakeholders. A method of establishing a type approval performance management system that can be grasped, utilized, and adjusted from a point of various stakeholders' views was proposed. This is expected to be more helpful in the implementation of the system, such as improving and applying quantitative effects to analysis by closely reviewing the effects and influencing factors of the type approval system based on the data accumulated through continuous performance management and reflecting to system improvement.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.6
• /
• pp.606-614
• /
• 1991

A robust direct adaptive controller with respect to additive and multiplicative unmodeled dynamics is designed. A new term, proportional to the product of the bounded tracking error and normalizing signal, is added to the conventional control input for improvement of robustness and performances of an adaptive system. It is shown by the mathematical analysis and simulation results that the stability of the closed loop system is guaranteed and the performance of the system is improved.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.430-433
• /
• 2003

In this paper, we propose the method of voice packet transformation for the improvement of voice quality in embedded VoIP system terminals. For this purpose, it was analyzed about the RTP header in the voice packet receiving side and designed about the handling method of voice packets by using jitter buffer. Through this analyzed and designed results, by implementing the voice packet transformation method and testing on the self-product VoIP system, we reached that a conclusion is satisfied with performance of VoIP services.