• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.549-557
• /
• 2012

In this paper an on-chip photo energy harvesting system with MPPT(Maximum Power Point Tracking) control is proposed. The ISC(Integrated Solar Cell) is implemented using p-diff/n-well diodes available in CMOS processes. MPPT control is implemented using the linear relationship between the open-circuit voltage of a PV(Photovoltaic) cell and its MPP(Maximum Power Point) voltage such that a small pilot PV cell can track the MPP of a main PV cell in real time. Simulation results show that the designed circuit with the MPPT control delivers the MPP voltage to load even though the load is heavy such that the load circuit can operate properly. The proposed circuit is designed in 0.18um CMOS process. The designed main PV cell and pilot PV cell occupy $8mm^2$ and $0.4mm^2$ respectively.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.1
• /
• pp.66-73
• /
• 2017

This study attempted to design lights with Type II distribution suitable for LED street lights based on the regulations of street light distribution developed by the Illuminating Engineering Society of North America (IESNA). The shape of an asymmetric lens, different from that of a rotationally symmetric lens, cannot be generated using a simple mathematical formula. In the first trial, the outline of the lens was fixed and simulated to confirm the distribution type. Following ISENA regulations, some problems that occurred during simulations and repeating was be modified that process is how we detected errors. Through optical research and simulations, a lens conforming to the regulations of Type II very short, Type II short, and Type II medium distributions was developed. A prototype was developed using simulation data and it was subjected to distribution tests. The results show that it can compare with property of Type II distribution.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2119.1_2120.1
• /
• 2009

UWB(Ultra Wide Band)는 차세대 무선통신 기술로 무선 디지털펄스라고도 한다. GHz대의 주파수를 사용하면서도 초당 수천~수백만 회의 저출력 펄스로 이루어진 것이 큰 특징이다[1]. 기존 무선통신 기술의 양대 축인 IEEE 802.11과 블루투스 등에 비해 속도와 전력소모 등에서 월등히 앞서고 있으며, SoC(System on a Chip)의 저전력 구현에 대한 연구가 활발히 진행되고 있다. OFDM은 크게 FFT(Fast Fourier Transform) 블록, Interpolation /decimation 필터 블록, 비터비 블록, 변복조 블록, 등화기 블록 등으로 구성된다. 고속 시스템에서는 대역효율성이 우수한 OFDM(Orthogonal Frequency Division Multiplexing) 방식을 사용하고 있으며, OFDM 전송방식은 직렬로 입력되는 데이터 열을 병렬 데이터 열로 변환한 후에 부반송파에 실어 전송하는 방식이다. 이와 같은 병렬화와 부반송파를 곱하는 동작은 IFFT와 FFT로 구현이 가능한데, FFT 블록의 구현 비용과 전력소모를 줄이는 것이 핵심사항이라고 할 수 있다. 기존논문에서는 OFDM용 FFT 구조로 단일버터플라이연산자 구조, 파이프라인 구조, 병렬구조 등의 여러 구조가 제안되었다[2]. 본 논문에서는 Radix-8 FFT 알고리즘 기반의 New partial Arithmetic 저전력 FFT 구조를 제안하였다. 제안한 New partial Arithmetic 저전력 FFT구조는 곱셈기 대신 병렬 가산기를 이용 하여 지금까지 사용되는 FFT 구조보다 전력소모를 줄일 수 있음을 보였다.

• Journal of Korea Multimedia Society
• /
• v.17 no.7
• /
• pp.886-894
• /
• 2014

Recently, domestic animal disease caused tremendous damage to farmhouses and the damage stretched in nationwide with the spread of epidemic disease. To prevent animal diseases from happening again, the system development to easily measure the temperature of sick animals and identify of them is needed, thereby quickly treat them, reducing losses of farmhouses. However, a lack of related equipment and human resource hampered its effort to minimize its losses. This study tries to develop diagnosis system as part of measures to curb these domestic animal diseases. This paper present the 센서 node based on IEEE 802.15.4 which can be attached to the animal body for real-time temperature measurement. We design and implement tiny chip-type that can be attached to the body of animals. Then, we use available power only when measuring temperatures in a long term-basis. In this paper, the 센서 node was applied to horse's neck. We measure the horse's body temperature between $32.2^{\circ}C{\sim}33.7^{\circ}C$ and analyze phenomenon data for 4 months.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.569-572
• /
• 1999

As the industry has been growing rapidly, the problem of environmental pollution has been on the rise seriously. In this paper, we used solar cells at the power supply unit of the equipment, which has been sold at present, for measuring the quality of water in order to complement the problem. Also, to get rid of the inconvenience that the examiners must go to the job site, check and collect the polluted water we set the goal at designing the water pollution alarm system which measures the quality of water automatically using one-chip microprocessor and materializing the program.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.6
• /
• pp.751-757
• /
• 2011

Subminiature devices such as Lab-on-a-chip and p-TAS(Micro Total Analysis System) have been intensively studied in biotechnology and chemistry, In many cases, a micromixer was widely used to mix different solutions for synthesizing novel materials. However, in microfluidic system, there is generally a laminar flow under very small Reynolds number so it is difficult to mix each solution perfectly. To settle this problem, we propose a new mixing mechanism which generates a horizontal and vertical multi-mixing (HVM) flow for effective mixing within a short mixing section. We evaluated the proposed mechanism using CFD analysis, and the results showed that the HVM mechanism had a relative high-effectiveness comparing to the existing methods.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.1
• /
• pp.6-14
• /
• 2012

For integrated complementary metal oxide semiconductor (CMOS) circuits, the lateral spread for two-dimensional (2-D) impurity distributions are very important for the analyzing the devices. The measured two-dimensional SEM data obtained using the chemical etching-method matched very well with the results of the Gauss model for boron implanted samples. But the profiles in boron implanted silicon were deviated from the Gauss model. The profiles in boron implanted silicon were shown a little bit steep profile in the deep region due to backscattering effect on the near surface from the bombardments of light boron ions. From the simulated 3-D data obtained using an analytical model, the 1-D and 2-D data were compared with the experimental data and could be verified the justification from the experimental data. The data of 3-D model were also shown good agreements with the experimental and the simulated data. It can be used in the 3-D chip design and the analysis of microelectro-mecanical system (MEMS) and special devices.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.356-361
• /
• 2008

The conventional drive system of SRM has a current sensor per each phase. The torque demand signal generated by the outer control loop is translated into individual current reference signal for each phase. The torque is controlled by regulating these currents. Using the SRM in a variable-speed control, the phase currents are generally regulated to achieve a square wave. The simplest form of current regulation uses fixed frequency delta modulation of the phase voltages. The aim of this paper is to regulate 3-phases current of SRM by only single current sensor using delta modulation with digital chip. In this paper, the asymmetric bridge converter which is able to control independently phases and be excited simultaneously is used as the driver system for 6/4 poles SRM. And the current sensor is replaced 3 sensors of each phase with only one on bus line of converter so as to detect current of every phase. The proposed delta modulation technique has been implemented in a simple digital logic circuit using EPLD(Electrically Programmable Logic Device). This method is verified through simulation and experiment results.

• Journal of Biomedical Engineering Research
• /
• v.17 no.4
• /
• pp.499-506
• /
• 1996

Blood flow velocimeter is an essential device to measure the blood flow in skin tissue. In this study, we developed a high-speed LDV(laser Doppler Velocimeter) that has real time processing capability using a DSP(digital signal processing) chip and is able to continuously measure information about blood-flow based on a noninvasive method using self-mixing type laser diode. This LDV system has a simpler structure than any other typical blood flow velocimeter and is composed of new self-mixing probe, stabilizer circuits DSP board, and interf'ace boule We measured velocity of speaker-unit by operational frequencies to identify Doppler effect of this system, performed clinical experiment on bare finger tip and compared it with a commercial euipment BPM403A(USA).

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.345-352
• /
• 2001

In this paper, a VoIP (Voice on Internet Protocol) terminal system, which can process voice in real time based on Linux, is designed and implemented. The hardware of it is designed using a i486 processor and a DSP codec chip which encodes and decodes voice data in real time. As an operating system, RTLinux, which is a real-time operating system based on Linux, is ported to manage real-time voice processing. The voice processing module of the system uses G.723.1 voice codec of ITU-T standard. It transfers voice data within 30ms to assure good voice quality. In order to satisfy the real time requirements and QoS (Quality-of-Service) for the voice data, the real-time voice processing device driver is designed and implemented. To verify the system, the chatting application program is developed and tested for QoS of the system.