• 멤브레인
• /
• 제31권6호
• /
• pp.371-383
• /
• 2021

음이온 교환막은 수소를 생산할 수 있는 수전해와 수소 연료를 사용하여 전기 에너지를 사용할 수 있는 연료전지 시스템에 사용될 수 있다. 음이온 교환막은 알칼라인 조건에서 수산화 이온(OH^-) 전도를 기반으로 작동한다. 하지만, 음이온 교환막은 상대적으로 낮은 이온 전도도와 알칼라인 안정성을 보이기 때문에 아직 수전해 및 연료전지에 상용화되는 데 한계가 존재한다. 이를 해결하기 위해서는 고분자 구조를 합리적으로 설계하여 새로운 음이온 교환막 소재를 개발하는 것이 필수적이다. 특히, 고분자의 물성, 이온전도도, 그리고 알칼라인 안정성이 우수하게 유지될 수 있도록 고분자 구조 및 합성 방법 등을 제어하여 한다. 음이온 교환막 중에서 Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) 기반의 소재는 상용화 되어 접근이 용이하다. 또한, 다른 고분자에 비해 상대적으로 기계적인 특성 및 화학적 안정성이 높아 음이온 교환막 개발에 자주 사용되고 있다. 본 총설에서는 음이온 교환막에서 사용되는 PPO 기반의 고분자 소재 개발 전략 및 특성에 대해서 소개하고자 한다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제26권2호
• /
• pp.81-88
• /
• 2013

Wet-spun silk fibers have attracted the attention of many researchers because of 1) the unique properties of silk as a biomaterial, including good biocompatibility and cyto-compatability and 2) the various methods available to control the structure and properties of the fiber. Cellulose nanofibrils (CNFs) have typically been used as a reinforcing material for natural and synthetic polymers. In this study, CNF-embedded silk fibroin (SF) nanocomposite fibers were prepared for the first time. The effects of CNF content on the rheology of the dope solution and the characteristics of wet-spun CNF/SF composite fibers were also examined. A 5% SF formic acid solution that contained no CNFs showed nearly Newtonian fluid behavior, with slight shear thinning. However, after the addition of 1% CNFs, the viscosity of the dope solution increased significantly, and apparent shear thinning was observed. The maximum draw ratio of the CNF/SF composite fibers decreased as the CNF content increased. Interestingly, the crystallinity index for the silk in the CNF/SF fibers was sequentially reduced as the CNF content was increased. This phenomenon may be due to the fact that the CNFs prevent ${\beta}$-sheet crystallization of the SF by elimination of formic acid from the dope solution during the coagulation process. The CNF/SF composite fibers displayed a relatively smooth surface with stripes, at low magnification (${\times}500$). However, a rugged nanoscale surface was observed at high magnification (${\times}10,000$), and the surface roughness increased with the CNF content.

• 한국환경과학회지
• /
• 제8권6호
• /
• pp.711-716
• /
• 1999

This research explored the feasibility of preparing and utilizing a prefonned polymeric solution of Al(III) for coagulation in water treatment. Slow base(NaOH) injection into supersaturated aluminum chloride and aluminum sulfate solutions did produce high yields of Al polymers useful to water treatment applications. The method of characterization analysis was based on timed spectrophotometer with ferron as a color developing reagent. The hydrolytic Al species were divided into $monomeric(Al_a),\;polymeric(Al_b),\;and\;precipitate(Al_c)$ from the difference in reaction kinetics. The analysis of PACl's characteristics showed that the quantity of polymeric Al produced at value of$ r(OH_{added}/AI)=2.2$ was $83\%$ of the total aluminum in solution, as showing maximum contents and precipitated Al was dramatically increased when r was increased above 2.35. In addition, the characteristics of polyaluminum sulfate (PAS) showed that polymeric Al contained at r = 0.75 was $18\%$ of the total aluminum in solution. The synthesized PACI and PAS were stable during storing period, as indicating negligible aging effect. The effect of sulfate ion on PACI was dependent on the concentration of sulfate ion. That is, polymeric species decrease and precipitate species increase as sulfate ion concentration increased. It can be concluded that the sulfate cause the formation of $Al(OH)_{3(S)}$ at low pH. However, The effect of calcium ion was negligible for distribution of Al species.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권6호
• /
• pp.489-495
• /
• 2006

In recent years, there has been an interest to use Moringa oleifera as the natural coagulant due to cost, associated health and environmental concerns of synthetic organic polymers and inorganic chemicals. However, it is known that M. oleifera as the natural coagulant is highly biodegradable and has a very short shelf life. This research was carried out to investigate the effects of storage temperature, packaging methods, and freeze-drying on the preservation of M. oleifera seeds powders. Non freeze-dried M. oleifera was prepared into different packaging namely open container, closed container and vacuum packing, whilst, freeze-dried M. oleifera was stored in closed container and vacuum packing. Each of the packaging was stored at room temperature ($30\;to\;32^{\circ}C$) and refrigerator ($4^{\circ}C$). The turbidity removal efficiencies of stored M. oleifera were examined using jar test at monthly interval for 12 months. The results indicated that non freeze-dried M. oleifera kept in the refrigerator ($4^{\circ}C$) would preserve its coagulation efficiency. In addition, closed container and vacuum packing were found to be more appropriate for the preservation of non freeze-dried M. oleifera, compared to open container. Freeze-dried M. oleifera retained its high coagulation efficiency regardless the storage temperature and packaging method for up to 11 months. Besides, higher increment in zeta potential values for water coagulated with freeze-dried M. oleifera indicated the higher frequency of charge neutralization and better coagulation efficiency of freeze-dried M. oleifera, compared to non freeze-dried seeds. As a coagulant, M. oleifera did not affect the pH of the water after treatment.

• 멤브레인
• /
• 제31권6호
• /
• pp.384-392
• /
• 2021

현재 우리 산업의 가속화된 발전으로 인해 다양하고 많은 양의 오염이 만들어지기 시작하고 있다. 특히 폐수의 경우 석유, 금속 및 유기물로 오염되는 강과 바다가 늘고 있으며, 빠른 조치가 필요해 보인다. 이러한 오염에 대응하기 위해 폐수에서 분리막을 이용한 깨끗한 물의 여과가 비용적으로 유리하고 친환경적인 기술로 떠오르고 있다. 재생 자원으로 만들어진 막여과 기법들이 환경오염의 원인 중 하나인 합성고분자 분리막들을 대체하기 위해 많이 사용되고 있다. 박테리아 셀룰로오스(Bacterial Cellulose / BC)는 순수하고 뚜렷한 형태의 셀룰로오스 나노섬유(Cellulose nanofibrils / CNF)이다. CNF에서 제조된 나노페이퍼는 각기 다른 용도로 한외여과막과 나노여과막으로 사용된다. BC의 높은 결정성으로 인해 폐수 처리 막의 필수 기준인 우수한 기계적 성질을 가질 수 있다. 본 리뷰 논문에서는 염료, 오일 및 중금속 등 폐수의 오염물질들을 걸러내기 위해 사용될 수 있는 BC 기반 분리막들에 대해 논의한다.

• 한국산업보건학회지
• /
• 제21권3호
• /
• pp.156-161
• /
• 2011

Objectives: Tetrahydrofuran (THF) is a colorless, water-miscible organic liquid with low viscosity at standard temperature and pressure. THF has been used as a solvent and a precursor for various syntheses of polymers. However, THF is known to irritate to the eyes, skin and mucus membranes. Overexposure by inhalation, ingestion or skin contact may produce nausea, dizziness, headaches, respiratory irritation and possible skin burns. The purpose of this study is to evaluate of the worker exposure and characteristics of workers in the workplaces that use or manufacture THF. Methods: Sixteen factories in Korea, which manufacture or use THF, were selected for this study and a total of 130 air samples including 104 time-weighted average (TWA) samples and 26 short-term exposure limit (STEL) samples, were collected. Air samples were collected with charcoal tube (100mg/50mg) and analyzed by gas chromatograph/flame ionization detector(GC/FID). Results: The TWA concentration of THF was 16.05ppm (GM) at PS script printing, 2.32ppm (GM) at PVC stabilizer, 1.03ppm (GM) at Lithium triethylborohydride, 0.63ppm (GM) at Polytetramethylene ether glycol(PTMEG), 0.42ppm (GM) at Manufacturing THF, 0.13ppm (GM) at Glue and 0.12ppm (GM) at synthetic rubber/resins. Two out of sampes for PS script printing exceeded 50ppm as 8-hour exposure limit of MOEL. The short term exposure to THF was 54.77ppm (GM) at PS script printing, 17.10ppm (GM) at PTMEG, 13.76ppm (GM) at Manufacturing THF, 2.86ppm (GM) at Lithium triethylborohydride, 0.87ppm (GM) at synthetic rubber/resins and 0.13ppm (GM) Glue. We found that the highest exposure process for both the TWA and STEL samples was PS script process. Two samples exceeded 100ppm as short term exposure limit of Ministry of Employment and Labor(MOEL). Conclusions: Characteristic of STEL concentration for THF is considerably different from TWA concentration in workplaces because workers could exposure high concentration of THF in a moment when they work irregularly schedule. So exposure controls for momentary works have to be prepared, and considered the skin absorption and inhale of THF.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.629-635
• /
• 2012

Two novel conjugated copolymers utilizing 4,7-dithien-2-yl-2,1,3-benzothiadiazole (DTBT) coupled with cyano (-CN) substituted vinylene, as the electron deficient moeity, have been synthesized and evaluated in bulk heterojunction solar cell. The electron deficient moeity was coupled with carbazole and fluorene unit by Knoevenagel condition to provide poly(bis-2,7-((Z)-1-cyano-2-(5-(7-(2-thienyl)-2,1,3-benzothiadiazol-4-yl)-2-thienyl)ethenyl)-alt-9-(1-octylnonyl)-9H-carbazol-2-yl-2-butenenitrile) (PCVCNDTBT) and poly(bis-2,7-((Z)-1-cyano-2-(5-(7-(2-thienyl)-2,1,3-benzothiadiazol-4-yl)-2-thienyl)ethenyl)-alt-9,9-dihexyl-9H-fluoren-2-yl) (PFVCNDTBT). The optical band gaps of PCVCNDTBT (1.74 eV) and PFVCNDTBT (1.80 eV) are lower than those of PCDTBT (1.88 eV) and PFVDTBT (2.13 eV), which is advantageous to provide better coverage of the solar spectrum in the longer wavelength region. The high $V_{oc}$ value of the PSC of PCVCNDTBT (~0.91 V) is attributed to its lower HOMO energy level ( 5.6 eV) as compared to PCDTBT ( 5.5 eV). Bulk heterojunction solar cells based on the blends of the polymers with [6,6]phenyl-$C_{61}$-butyric acid methyl ester ($PC_{61}BM$) gave power conversion efficiencies of 0.76% for PCVCNDTBT under AM 1.5, 100 mW/$cm^2$.

• Journal of the Korean Wood Science and Technology
• /
• 제28권3호
• /
• pp.34-41
• /
• 2000

최근 들어 범용 플라스틱계 고분자의 환경오염이 심각한 사회적 문제를 유발함에 따라 많은 연구자들이 생분해성 고분자 소재 개발에 관한 연구를 시행하고 있으며, 본 연구에서는 폐지를 이용한 생분해성 고분자물질의 제조를 위하여 폐지의 화학적 성상 및 최적 전처리조건을 검토하기 위해 시행하였고, 그 결과는 다음과 같다. 각 공시재료별 화학적 조성분 분석 결과 신문폐지와 골판폐지의 리그닌 함량이 사무실 폐지에 비해 높게 나타났다. 또한 건식해리 펄프에 비해 습식해리 펄프의 회분 함량이 낮게 나타났다. 생분해성 고분자의 제조를 위해서는 반드시 폐지의 화학적 전처리가 요구되며, 습식해리 시료가 건식해리 시료에 비해 전처리 효과가 우수하였다. 본 연구에서 행해진 화학적 전처리 중 아염소산나트륨으로 가온($70^{\circ}C$)처리한 전처리방법이 가장 우수한 것으로 판명되었다. 한편 산소-알카리 전처리는 탈리그닌처리 효과는 우수하였지만, 수율이 과도하게 저하되고, 탄수화물의 붕괴에 따른 셀룰로오스의 중합도 저하로 인해 전처리 공정으로서 부적합하다고 판단되었다.

• Korean Chemical Engineering Research
• /
• 제43권2호
• /
• pp.313-317
• /
• 2005

양이온성 고분자와 같은 합성 유전자 전달체들은 음이온성을 지닌 plasmid DNA와 쉽게 콤플렉스를 형성하는 경향이 있다. 이에 키토산은 유전자 전달체 시스템으로써 이용되어 질 수 있는 무한한 가능성을 지닌 polysaccharide이다. 저분자량 키토산이 DNA와 결합을 할 수 있는지 확인하기 위하여 전기영동장치를 이용하여 분석하였다. DLS(dynamic laser scattering)와 SEM(scanning electron microscopy)을 이용하여 키토산/DNA 콤플렉스의 크기와 모폴로지를 조사하였다. 또한, 키토산의 분자량과 전하밀도가 콤플렉스의 크기와 결합된 DNA의 양에 어떻게 영향을 주는지 연구를 수행하였다. 저분자량 키토산은 실험과정에서 사용되는 양을 늘려갈수록 84-108%의 세포 생존율을 보임에 따라 그 독성이 무시할 정도가 됨을 확인할 수 있었다. 키토산/DNA 콤플렉스를 이용한 유전자 발현 효율 실험에서는 lipofecamine에 비해서는 낮은 값을 보였지만, naked DNA를 이용한 경우보다는 상대적으로 높은 값을 나타내었다. 키토산의 분자량에 따른 유전자 발현 효율 연구에서는 평균 분자량이 8,517인 키토산을 사용한 경우가 4,078의 분자량을 이용한 실험 결과보다 높은 값을 보였고, 이는 키토산의 전하밀도가 유전자 발현 효율에 영향을 준다는 것을 확인할 수 있었다.