• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.277-280
• /
• 2001

This paper presents a speed sensorless implementation of digital speed control system of Surface Permanent-Magnet Synchronous Motor(SPMSM) drives with a direct torque control(DTC). The system presented are stator flux and torque observer of stator flux feedback control model that inputs are current and voltage sensing of motor terminal with estimated rotor angle for a low speed operating area, two hysteresis band controllers, an optimal switching look-up table, rotor speed estimator, and IGBT voltage source inverter by using fully integrated control software. The developed speed sensorless control system are shown a good motion control response characteristic results and high performance features using 1.0Kw purposed servo drive SPMSM.

• Structural Engineering and Mechanics
• /
• v.34 no.5
• /
• pp.549-561
• /
• 2010

In this paper, free vibration analyses of a parallel placed twin pipe system simulated by simply supported-simply supported and fixed-fixed Euler-Bernoulli beams resting on Winkler elastic soil are presented. The motion of the system is described by a homogenous set of two partial differential equations, which is solved by a simulation method called the Differential Transform Method (DTM). Free vibrations of an elastically connected twin pipe system are realized by synchronous and asynchronous deflections. The results of the presented theoretical analyses for simply supported Euler-Bernoulli beams are compared with existing ones in open literature and very good agreement is demonstrated.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.397-400
• /
• 2001

This paper presents a implementation of digital sensorless position control system of surface permanent-magnet synchronous motor (SPMSM) drive with a direct torque control (DTC). The system are stator flux and torque observer of stator flux feedback control model that inputs are current and voltage sensing of motor terminal with estimated rotor angle for a low speed operating area, two hysteresis band controllers, an optimal switching look-up table, rotor speed estimator, and IGBT voltage source inverter by using fully integrated control software. The developed sensorless control system are shown a good motion control response characteristic results and high performance features using 1.0 (kW) purposed servo drive SPMSM.

• The Journal of Korea Robotics Society
• /
• v.19 no.3
• /
• pp.266-273
• /
• 2024

With the rising interaction between robots and humans, detecting collisions has become increasingly vital for ensuring safety. In this paper, we propose a novel approach for detecting collisions without using force torque sensors or tactile sensors, utilizing a Transformer-based neural network architecture. The proposed collision detection approach comprises a torque estimator network that predicts the joint torque in a free-motion state using Synchronous time-step encoding, and a collision discriminator network that predicts collisions by leveraging the difference between estimated and actual torques. The collision discriminator finally creates a binary tensor that predicts collisions frame by frame. In simulations, the proposed network exhibited enhanced collision detection performance relative to the other kinds of networks both in terms of prediction speed and accuracy. This underscores the benefits of using Transformer networks for collision detection tasks, where rapid decision-making is essential.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.71-80
• /
• 2002

According to the rapid growth of high speed and precise industry, the application of synchronous motor has been increased. In the application fields, these fast dynamic response is of prime importance. In particular, since the PMLSM(Permanent Magnet Linear Synchronous Motor) has characteristics of high speed, high thrust, it has been used in high-performance servo drive. From these reasons, it is recently used for high precise position control, and machine tool. In this paper, a study of the sliding mode with VSS (Variable Structure System) design for a PMLSM is presented. For fast and precise motion control of PMLSM, the compensation of disturbance and parameter variation is necessary. Hence we eliminate the reaching phase use of VSS that is changed to switching function and vector control using the state observer. And we proposed to sliding mode control algorithm so that realize fast response without overshoot, disturbance and parameter variation.

• Journal of Aerospace System Engineering
• /
• v.17 no.6
• /
• pp.63-71
• /
• 2023

In the present study, the effect of pitch amplitude on the unsteady aerodynamics of a NACA 0012 airfoil is numerically investigated. When the frequency ratio is equal to 1.0, airfoil pitching with 20 and 30 degrees of pitch amplitude shows almost small lift generation, but the lift is significantly increased in case of 10-degree pitch amplitude. When the frequency is 0.5, the lift coefficients have large values, and the lift increases with a decrease in pitch amplitude. When the frequency ratio is 1.0, the airfoil generates large thrust. The thrust decreases as the pitch amplitude decreases. When the frequency ratio is 0.5, drag is generated for the 30-degree pitch amplitude, but the thrust is generated for 10-degree pitch amplitude. In future, the effect of heave amplitude on the unsteady aerodynamics of the airfoil will be studied.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.1
• /
• pp.55-68
• /
• 2020

In order to investigate the hydraulic characteristics of a boundary layer streaming over the beach cusps appeared in swells prevailing mild seas, we numerically simulated the shoaling process of Edge waves over the beach cusp. Synchronous Edge waves known to sustain the beach cusps could successfully be duplicated by generating two obliquely colliding Edge waves in front of beach cusps. The amplitude A_B and length L_B of Beach Cusp were elected to be 1.25 m and 18 m, respectively based on the measured data along the Mang-Bang beach. Numerical results show that boundary layer streaming was formed at every phase of shoaling process without exception, and the maximum boundary layer streaming was observed to occur at the crest of sand bar. In RUN 1 where the shortest waves were deployed, the maximum boundary layer streaming was observed to be around 0.32 m/s, which far exceeds the amplitude of free stream by two times. It is also noted that the maximum boundary layer streaming mentioned above greatly differs from the analytical solution by Longuet-Higgins (1957) based on wave Reynolds stress. In doing so, we also identify the recovery procedure of natural beaches in swells prevailing mild seas, which can be summarized such as: as the infra-gravity waves formed in swells by the resonance wave-wave interaction arrives near the breaking line, the sediments ascending near the free surface by the Phase II waves orbital motion were carried toward the pinnacle of foreshore by the shoreward flow commenced at the steep front of breaking waves, and were deposited near the pinnacle of foreshore due to the infiltration.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.875-881
• /
• 2014

The redundancy resolution of the seven DOF (Degree of Freedom) upper limb exoskeleton is key to the synchronous motion between a robot and a human user. According to the seven DOF human arm model, positioning and orientating the wrist can be completed by multiple arm configurations that results in the non-unique solution to the inverse kinematics. This paper presents analysis on the kinematic and dynamic aspect of the human arm movement and its effect on the redundancy resolution of the seven DOF human arm model. The redundancy of the arm is expressed mathematically by defining the swivel angle. The final form of swivel angle can be represented as a linear combination of two different swivel angles achieved by optimizing two cost functions based on kinematic and dynamic criteria. The kinematic criterion is to maximize the projection of the longest principal axis of the manipulability ellipsoid of the human arm on the vector connecting the wrist and the virtual target on the head region. The dynamic criterion is to minimize the mechanical work done in the joint space for each of two consecutive points along the task space trajectory. The contribution of each criterion on the redundancy was verified by the post processing of experimental data collected with a motion capture system. Results indicate that the bimodal redundancy resolution approach improved the accuracy of the predicted swivel angle. Statistical testing of the dynamic constraint contribution shows that under moderate speeds and no load, the dynamic component of the human arm is not dominant, and it is enough to resolve the redundancy without dynamic constraint for the realtime application.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.437-445
• /
• 1999

This paper presents a simple modification technique of finite element model for dynamic analysis of linear/nonlinear structural system subjected to multiple support excitation. For the sake of verification of the proposed method, dynamic responses obtained by the present technique for a couple of linear and nonlinear structural systems were compared with those by a general-purpose structural analysis software which can deal with the multi-support analysis. The method presented in this paper is expected to be used for multiple support excitation analysis by means of a computer code without the capability of modeling the non-synchronous support motion.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.161-164
• /
• 1999

본 논문에서는 표적 추적 시스템에서 센서 어레이에 입사되는 표적신호에 대한 센서 출력 신호간의 지연시간 추정(TDE:Time Delay Estimation)을 위해 백색상호 상관법(CSP:Cross-Power Spectrum Phase Analysis)을 이용한다. 그러나 음파의 다중경로 전달특성 및 배경잡음의 영향으로 인해 CSP계수는 많은 클러터(Clutter)를 포함하게 되고 결국 방위 추정 오차의 요인이 된다. 따라서 센서 어레이 중심좌표를 기준으로 대칭 배열된 센서쌍(Pair)에 대한 CSP계수를 동기가산 하여 실제 표적 방향 이외의 방향정보를 제거하는 방법을 제안한다. 시간에 따라 각도를 변침하는 표적에 대한 표적기동분석 (BOTMA:Bearings Only Target Motion Analysis)을 위해 매 관측시간마다 동기가산을 행한 CSP결과를 누적하여 방위각 궤적을 형성하였을 때 시간 Window에 따라 약간의 차이는 있지만 약 10dB의 궤적 추적 성능을 확인하였다.