• Smart Structures and Systems
• /
• 제23권3호
• /
• pp.279-293
• /
• 2019

To ensure high quality data being used for data mining or feature extraction in the bridge structural health monitoring (SHM) system, a practical sensor fault diagnosis methodology has been developed based on the similarity of symmetric structure responses. First, the similarity of symmetric response is discussed using field monitoring data from different sensor types. All the sensors are initially paired and sensor faults are then detected pair by pair to achieve the multi-fault diagnosis of sensor systems. To resolve the coupling response issue between structural damage and sensor fault, the similarity for the target zone (where the studied sensor pair is located) is assessed to determine whether the localized structural damage or sensor fault results in the dissimilarity of the studied sensor pair. If the suspected sensor pair is detected with at least one sensor being faulty, field test could be implemented to support the regression analysis based on the monitoring and field test data for sensor fault isolation and reconstruction. Finally, a case study is adopted to demonstrate the effectiveness of the proposed methodology. As a result, Dasarathy's information fusion model is adopted for multi-sensor information fusion. Euclidean distance is selected as the index to assess the similarity. In conclusion, the proposed method is practical for actual engineering which ensures the reliability of further analysis based on monitoring data.

• 대한조선학회논문집
• /
• 제41권4호
• /
• pp.45-52
• /
• 2004

Exact solution on the anti-symmetric response of ships having uniform sectional properties in waves is derived. Boundary value problem consisted of Timoshenko beam equation and free-free end condition is solved analytically. The responses are assumed as linear and wave loads are calculated by using strip method. Horizontal bending moment, shear force and torsional moment are calculated. The developed analysis model is used for the benchmark test of the numerical codes in this problem. Also the application on the preliminary design of barge-like ships and VLFS (Very Large Floating Structure) is expected

• 산업기술연구
• /
• 제24권A호
• /
• pp.195-204
• /
• 2004

To evaluate inelastic seismic responses of multi-span bridge structures, the capacity spectrum method(CSM) incorporating the equivalent single-degree-of freedom(ESDOF) method is presented. Application of the CSM incorporating the ESDOF method is illustrated by example analysis for symmetric and asymmetric bridge structures. To investigate an accuracy of the CSM, the maximum displacements estimated by the CSM are compared to those by inelastic time history analysis for several artificial earthquakes. The results show that the CSM provided conservative estimates of the maximum displacements for the symmetric and asymmetric bridge structures, and the trend of conservative estimates of the asymmetric bridge structures was significantly larger than that of the symmetric bridge structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1994년도 추계학술대회논문집; 한국종합전시장, 18 Nov. 1994
• /
• pp.21-28
• /
• 1994

The forced vibration with the symmetric boundary condition in nonlinear structure is studied by utilizing the characteristic of the free vibration which have two modes with the similar natural frequency. Two linear modes exist to have no concern with the amplitude. It is found that the normal mode or elliptic orbit as the newly coupled modes is generated in accordance with changing the stability. It is also known that responses for forced vibration having the small external force and damping are near mode of free vibration and the stability for each response is determined according to the stability for each response is determined according to the stability in mode of free vibration. Finally the stability and bifurcation are analyzed in proportion to increment of external force and damping.

• 전산구조공학
• /
• 제8권3호
• /
• pp.59-66
• /
• 1995

점소성이론을 이용하여 충격하중을 받는 구조물의 거동을 하중시간에 따라 조사하였다. 점소성이론은 재료의 소성특성과 시간변화특성을 나타내는 Rheology 이론을 동시에 고려한 이론이다. 점소성 구성방정식을 구한 후, 이를 이차원 유한요소해석프로그램에서 심어서 평면응력, 평면 변형률, 축대칭 구조물의 동적 거동을 해석할 수 있도록 기존프로그램을 수정.개발하였다. Perzyna에 의한 점소성 구성방정식은 유한요소해석에서 Explicit 적분법을 사용해야 하는데 반하여, 본 연구에서 구한 구성방정식은 Implicit 적분법을 적용할 수 있도록 Algorithm을 개발하였다. 다양한 하중시간을 갖는 충격하중을 선택한 구조물에 가해 해석한 결과, 하중시간이 길수록 변형이 증가하여 점소성 거동을 하며, 높은 고유진동수 성분이 점소성거동으로 거의 소멸된다는 결론을 얻었다.

• Structural Engineering and Mechanics
• /
• 제87권3호
• /
• pp.211-219
• /
• 2023

The structural health of a pipeline is usually assessed by visual inspection. In addition to the fact that this method is expensive and time consuming, inspection of the whole structure is not possible due to limited access to some points. Therefore, adopting a damage detection method without the mentioned limitations is important in order to increase the safety of the structure. In recent years, vibration-based methods have been used to detect damage. These methods detect structural defects based on the fact that the dynamic responses of the structure will change due to damage existence. Therefore, the location and extent of damage, before and after the damage, are determined. In this study, fuzzy genetic algorithm has been used to monitor the structural health of the pipeline to create a fuzzy automated system and all kinds of possible failure scenarios that can occur for the structure. For this purpose, the results of an experimental model have been used. Its numerical model is generated in ABAQUS software and the results of the analysis are used in the fuzzy genetic algorithm. Results show that the system is more accurate in detecting high-intensity damages, and the use of higher frequency modes helps to increase accuracy. Moreover, the system considers the damage in symmetric regions with the same degree of membership. To deal with the uncertainties, some error values are added, which are observed to be negligible up to 10% of the error.

• 한국항공우주학회지
• /
• 제34권1호
• /
• pp.24-31
• /
• 2006

본 연구에서는 완전 내재적 기법을 이용한 2계 자유도 모델에 대한 플러터 해석을 수행하였다. 유동해석을 위하여 2차원 Navier-Stokes 지배방정식을 ε-SST 난류모델과 DP-SGS 병렬화 기법을 이용해 구성하였다. 구조해석을 위하여 피치 와 플런지의 2계 자유도를 갖는 모델을 구성하였으며 시간영역에서의 해석을 위하여 유동해석과 마찬가지로 이중 시간 전진 기법을 이용하였다. 가상 시간 전진에서 유체-구조 결합을 통해서 강성결합을 구현하였으며 이를 천음속 플러터 예측에 적용하였다. 플러터 해석의 전형적인 응답인 감쇠응답, 중립응답, 발산응답 및 limit cycle oscillation (LCO) 등을 계산하였으며, 더불어 플러터 속도 경계곡선을 작성하였다. 천음속 플러터 해석은 난류모델 뿐만 아니라 유체-구조 결합 방법에 따라 다른 특성을 보임을 확인하였다.

• 한국해안·해양공학회논문집
• /
• 제27권2호
• /
• pp.113-117
• /
• 2015

본 연구에서는 연결재(커플러)로 결합된 라이저의 외부흐름에 따른 3차원 유동-구조 연동해석을 수행하였다. 두 가지 연결재(평면 커플러, 곡면 커플러)를 고려하였으며 ANSYS CFX를 사용하여 수치해석을 수행하였다. 유동해석에서 유동공간은 유입구, 유출구와 대칭 경계조건으로 구성되었으며 연결재의 형상에 따른 항력계수와 유속 분포 결과를 비교하였다. 구조해석에서는 라이저의 응답(최대 변위 및 최대 등가응력)을 통해 연결재의 유용성을 확인하였다.

• 대한공업교육학회지
• /
• 제31권2호
• /
• pp.364-380
• /
• 2006

본 연구는 모델링 오차를 갖는 유연구조물의 잔류진동을 억제하는 입력설계에 대한 방법이다. 개루프 제어방법으로 시간지연방법을 이용하여 여러 가지 형태로 설계된 입력을 사용하여 유연구조물의 강체운동과 잔류진동을 억제함을 시뮬레이션과 실험을 통해 비교 확인해 보았다. 또한 모델 오차에 대한 강인성 측면에서도 해석적으로 개루프 시스템에서 검토해 보았다. 여기서 사용된 입력설계(Input-Shaping) 방법은 일련의 임펄스 콘볼류션을 이용하여 진동이 제어되는 입력을 설계한다. 실린더 모양의 허브와 양쪽에 유연한 날개 모양을 가진 모델이 실험에 이용되었으며 제안된 입력설계 명령과 설계되지 않은 명령에 대한 강체운동과 구조물의 잔류진동을 측정하여 입력설계 방법의 효과를 확인하였다. 날개모양의 구조물은 길고 유연하여 운동 상태에서 낮은 주파수 진동을 수반하는 구조물이다. 또한, 적절히 설계된 입력이 폐루프 제어시스템의 입력으로 사용할 때의 응답을 개루프 제어시스템의 응답과 비교하기 위해 해석적 방법을 통해 살펴보았다. 제어의 목적은 강체의 빠른 정착시간, 유연 구조물의 빠른 잔류진동 감쇄, 모델의 불확실성에 대한 강인성 등을 검토해 보는 것이다.

• Earthquakes and Structures
• /
• 제8권1호
• /
• pp.77-100
• /
• 2015

Multiple tuned mass dampers (MTMDs) tuned to various frequencies have been shown to efficiently control the seismic response of structures where multiple modes are dominant. One example is irregular structures that are found more vulnerable than their symmetric counterparts. With the technology of MTMDs available, design and optimal design methodologies are required for application. Such a methodology, in the form of an analysis/redesign (A/R) scheme, has been previously presented by the authors while limiting responses of interest to allowable values, i.e., performance-based design (PBD). In this paper, the A/R procedure is modified based on formal optimality criteria, making it more cost efficient, as well as more computationally efficient. It is shown that by using the methodology presented herein, a desired performance level is successfully targeted by adding near-optimal amounts of mass at various locations and tuning the TMDs to dampen several of the structure's frequencies. This is done using analysis tools only.