• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.8
• /
• pp.348-353
• /
• 2003

This paper was the research of high voltage suspension insulator (400 [kN]) including pottery stone, feldspar, clay and alumina of 17 [wt%]. The slurry was fabricated after ball milling mixed raw materials. Green compacts were made by the extrusion of jiggering method and were sintered at 1300[$^{\circ}C$] for 50 [min.] in the tunnel kiln. The sintered density was reached to 97% of theoretical density, and the bending strength was 1658 [k $g_{f}$/$\textrm{cm}^2$] and hardness and fracture toughness which was measured by ICL( indentation crack length ) method were 1658 (kgf/$\textrm{cm}^2$) and 27.5 [Gpa], respectively. In measurement of tana and insulation break voltage of 400 (kN) porcelain, tan$\delta$ took some numerical value between 17${\times}$10$_{-3}$ and 61${\times}$10$_{-3}$ and insulation break voltage value was 19.9$\pm$1.4 [㎸/mm]. The test was performed to research whether the shape of pin affect a overvoltage break load or not As a consequence, when a pin was designed a pin diameter 51 [mm] with the bottom form of two-step constructed with straight in the suspension insulator, Insulator showed overvoltage break load 52 [ton] of the highest value and reflected a fine characteristic in aged deterioration test which is one of the accelerated aging test. Also it could be confirmed a fine characteristic through performing the test that electrical property of insulator was established correctly in accordance with IEC 60383-1 standards.s.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.193-198
• /
• 2000

분무건조장치는 Solution, Slurry, Emulsion, Colloidal Suspension 등의 액상원료를 미립화하여 표면적을 증가시켜 수열면적을 크게 하여 열풍과 직접 접촉함으로써 순간적으로 건조를 행하여 액상원료로부터 바로 분립상의 제품을 얻는 건조법이다. 분유를 비롯하여 Instant 식품류, 합성세제, 염료, 안료, Ceramic, 공해 폐액의 처리에 이르기까지 폭넓게 이용되고 있다. 분무건조기는 통기, 회전, 기류 건조기 등 다른 건조기에 비하여 고도의 설계 및 제작 기술을 요하며, 설계에 있어서 일부 이론적인 취급이 행해지고 있는 것은 사실이나 아직은 경험에 의존하고 있는 현실이다. 국내에서 제작되고 있는 분무건조기의 열효율은 25-33%로 선진국의 35-48%에 비해 매우 낮다. 국내에서 사용되고 있는 분무건조기의 92%는 덴마크, 일본 등에서 수입된 것이다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.557-560
• /
• 2003

Magnetorheological finishing(MRF) is a newly developed and recently commercialized for finishing optical components. The magnetorheological fluid consists of a water based suspension of carbonyl iron, nonmagnetic polishing abrasives, and small amounts of stabilizer. This magnetorheological fluid is pumped from conditioner on the rotating wheel and suctioned back to the conditioner, where it cooled to setpoint temperature and evaporative losses are replaced. This method could produce some problems in suction. So newly designed MRF tools is proposed in which MR fluid is not circulated and conditioned by the slurry. The new polishing mechanism is experimented. Measured surface roughness supports the validity of this mechanism.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.129-153
• /
• 1996

In aqueous slurry processing of silicon nitride, the interaction of dispersant and binder on the surface of particles was studied to identify the effect of these additives on ceramic powder processing. Polymethacrylic acid (PMAA) and polyvinyl alcohol (PVA) were used as dispersant and binder, respectively. the adsorption isotherms of PMAA and PVA for the silicon nitride suspension were determined, while the adsorption of PMAA was differentiated in the mixed additive system by ultraviolet spectroscopy. These experiments were done in order to investigate the effect of these organic additives on the physicochemical properties of silicon nitride suspensions. The electrokinetic behavior of silicon nitride was subsequently measured by electrokinetic sonic amplitude (ESA). As PMAA adsorbed onto silicon nitride, the isoelectric point (pHicp) shifted from pH=6.7 to acidic pH, depending on the surface coverage of PMAA. However, adsorption of PVA did not change the pHicp of suspensions, but did decrease the surface potential of silicon nitride moderately. The rheological behavior of silicon nitride suspensions was measured to assess the stability of particles in aqueous media, and was correlated with the electrokinetic behavior and adsorption isotherm data for silicon nitride.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.287-288
• /
• 2006

Two approaches for the fabrication of tailored powder composites with specially distributed pore-grain structure and chemical composition are investigated. Electrophoretic Deposition (EPD) followed by microwave sintering is employed to obtain functionally graded materials (FGM) by in-situ controlling the deposition bath suspension composition. $Al_2O_3/ZrO_2$ and zeolite FGM are successfully synthesized using this technique. In order to fabricate an aligned porous structure, unidirectional freezing followed by freeze drying and sintering is employed. By controlling the temperature gradient during freezing of powder slurry, a unidirectional ice-ceramic structure is obtained. The frozen specimen is then subjected to freeze drying to sublimate the ice. The obtained capillary-porous ceramic specimen is consolidated by sintering. The sintering of the graded structure is modeled by the continuum theory of sintering.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.1
• /
• pp.77-88
• /
• 1992

Effective strains of cowpea bradyrhizobia JB7 $nal^rspe^r$ and CB756 $str^rrif^r$, antibiotic-resistant variants of JB7 and CB756, respectively, were used to examine changes of rhizosphere populations and nodule occupancy. Populations of each strain increased gradually in the rhizosphere, reaching a maximum of about $10^8$ cells per root system. Nodule number increased as the density of inoculum increased from $10^2$ cells to $10^8$ cells per seed. Inoculation with liquid suspension resulted in the formation of more nodules than the peat slurry or granule inoculation. When JB7 $nal^rspe^r$ and CB756 $str^rrif^r$ were introduced in equal numbers in inoculum mixtures the former consistantly occupied the majority of nodules with all three groundnut cultivars used. There was no difference in yield between nitrogen treatments and inocultation treatments.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.1183-1189
• /
• 2009

The sedimentation rate of particles in a suspension is a function of particle size, initial slurry water content and salinity. Many researches conducted on the behavior of dredged soils have centered on such factors. However, there have been few attempts to assess another important influence factor of seasonal water temperature on designing the placement of dredged materials. In this paper, the effect of seasonal water temperature on sedimentation characteristics of dredged clay was investigated with consideration of three different water temperatures, that are $5^{\circ}C$, $15^{\circ}C$, $35^{\circ}C$, which represent critical water temperatures in winter, spring or fall, and summer, respectively. A series of experimental results reveal that the sedimentation rates for the water temperature of $15^{\circ}C$ and $35^{\circ}C$ are very similar each other, but that of $5^{\circ}C$ that represents a winter season leads to a considerably delayed sedimentation compared to the others. This may be attributable to the retardation of ion-leaching from clay particles at low water temperature.

• Tuberculosis and Respiratory Diseases
• /
• v.51 no.3
• /
• pp.265-269
• /
• 2001

Presently talc is one of the agents most commonly used for producing a pleurodesis in patients with either a recurrent pleural effusion or a spontaneous pneumothorax. Talc can be instilled into the pleural space either as an aerosol (insufflation) or as a suspension (slurry) in saline. They are quite effective in producing a pleurodesis. However, they rarely have acute serious adverse effects including acute respiratory distress syndrome, and recently a discussion for using pleurodesis has been reported. We experienced a case of acute respiratory distressed syndrome after talc pleurodesis. A 64 year old man, who was diagnosed lung cancer with a malignant pleural effusion at the same side, was treated by pleurodesis using talc to control the effusion. After 3 days, he suffered fever, chill and breathlessness. The chest P A and CT revealed a bilateral infiltration in both lungs and the blood gas analysis confirmed hypoxemia, which required mechanical ventilation.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.137-145
• /
• 2001

A new process, gelcasting in aqueous medium, to fabricate complex-shaped ceramic core has investigated. The ceramic slurry, mixture of fused silica powder and additives such as zircon and cordierite, was electrosterically stabilizes. The slip was prepared by ball milling of polydispered ceramic suspension with monomer, dimer and dispersant. The rheological behavior of slip was evaluated by viscosity measurement. It was found that the high solid loading of polydispersed ceramic slip, which has low viscosity of 50vol%, is possible to obtained. The viscosity of the slip was significantly dependent upon the amount of polymer dispersant and the formulation of monomer and dimer. The green bodies were fabricated through casting and gelation at room temperature followed by drying at $25^{\circ}C$ for 48hrs under relative humidity of 80~85%. Crack-free green body was successfully fabricated through the above process.

• The Korean Journal of Food And Nutrition
• /
• v.14 no.2
• /
• pp.161-166
• /
• 2001

The optimum condition for production of yeast extract by autolysis and enzymatic method were studied with waste brewers\` yeast. The major components of brewer\`s yeast in proximate compositions were carbohydrate(46.0%) and protein(41.7%). There was a little appreciable difference in the promaximate composition of waste brewers\` and bakery yeast. The major minerals were identified as K, P, Mg and Ca, and their contents were about 1,659.7%, 1,197.4mg%, 210.4mg% and 105.6mg%, respectively. The major vitamins were identified as vitamin C and vitamin B group, and their contents were about 7.9IU/100g and 4.2IU/100g, respectively. The optimum yeast concentration in the reaction suspension was 10% (w/v) waste brewer\`s yeast slurry. The protein content in brewer\`s yeast extract was increased with addition of NaCl as plasmolyzers. However, the plasmolyzer effect of ethanol a little showed as the concentration increasd from 3% ∼7%. The 5\`-nucleotides(5\`-GMP and 5\`-IMP) content in brewer\`s yeast extract was increased with addition of glucanase. The total content of 5\`-nucleotides (5\`-GMP and 5\`-IMP) increased by 160% than those by the autolysis of waste brewer\`s and bakery yeast.