• Korean Journal of Cleft Lip And Palate
• /
• v.15 no.1
• /
• pp.21-28
• /
• 2012

Unilateral cleft lip is not a simple and independent problem in all aspects. nasal deformity results from the cleft lip, maxillary hypoplasia, and abnormal muscular pull on the nasal structures, including abnormal muscular tension on the alar base and abnormal position of the orbicularis oris muscle. Its gross and histopathologic characteristics include widening of the alar base, a midline deviation of the columella and septum to the noncleft side, dorsal displacement of the dome, lateral rotation of medial crura, buckling of the alar cartilage, and underdevelopment of the pyriform aperture. Since Dr. Millard first presented his method for repair of the unilateral cleft lip and nasal deformity in 1955, no other technique has gained as much popularity as the rotation-advancement principle. Principles established more than 50 years ago and techniques are evolving continuously. Unlike earlier procedures, this repair gives the surgeon the opportunity to manipulate the individual cleft elements through various modifications while maintaining Millard's original surgical and anatomical goals. Although this strategy is applied worldwide, successful execution is variable and highly operator dependent. Millard and many other surgeons have made technical variations to adjust the procedure to each specific patient, to address some of its faults, and to gain new advantages. We will review the Mulliken's modifications that Dr. Millard made to his original rotation-advancement principle and inform cases applied modifying the rotation-advancement principle.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.11
• /
• pp.4683-4688
• /
• 2014

Background: Breast conservation treatment (BCT) has long been recognised to provide survival outcomes equivalent to mastectomy for the treatment of breast cancer. However, published reports of BCT rates in Asian communities are lower than those from Western countries. This study sought to investigate the eligibility and utilisation of BCT in a predominantly Asian population. Materials and Methods: All patients treated surgically by a single surgeon at a private medical facility between 2009 and 2011 were included in the study. Patients were deemed to have successful BCT if they underwent breast conserving surgery with pathologic clear margins and completed all recommended adjuvant treatment. Those who did not complete adjuvant treatment were excluded from the analysis. Results: Data from a total of 161 patients who underwent treatment during the study period were analysed. The mean age was 48.8 years. One hundred and six patients (65.8%) were of Chinese ethnicity, 12 were Indian (7.5%), 11 were Malay (6.8%), 18 were Caucasian (11.2%) and 14 (8.7%) were of other Asian ethnicity. One hundred and thirty-eight women (85.7%) underwent BCT. Of the 23 (14.3%) who underwent mastectomy, 8 (5.4%) elected to undergo a mastectomy despite being eligible for BCT. In total, it was assessed that 146 of 161 patients (90.7%) were eligible for BCT and utilisation was 94.5%. Conclusions: In this study, eligibility, utilisation of BCT and eventual successful breast conservation rates are similar to published rates in Western communities. Additional research is needed to investigate the reasons for the lower published BCT rates in Asian countries and determine ways to improve them.

• Journal of International Society for Simulation Surgery
• /
• v.1 no.1
• /
• pp.13-15
• /
• 2014

Nowadays, with advanced 3D printing techniques, the custom-made implant can be manufactured for the patient. Especially in skull reconstruction, it is difficult to design the implant due to complicated geometry. In large defect, an autograft is inappropriate to cover the defect due to donor morbidity. We present the process of manufacturing the 3D custom-made implant for skull reconstruction. There was one patient with skull defect repaired using custom-made 3D titanium implant in the plastic and reconstructive surgery department. The patient had defect of the left parieto-temporal area after craniectomy due to traumatic subdural hematoma. Custom-made 3D titanium implants were manufactured by Medyssey Co., Ltd. using 3D CT data, Mimics software and an EBM (Electron Beam Melting) machine. The engineer and surgeon reviewed several different designs and simulated a mock surgery on 3D skull model. During the operation, the custom-made implant was fit to the defect properly without dead space. The operative site healed without any specific complications. In skull reconstruction, autograft has been the treatment of choice. However, it is not always available and depends on the size of defect and donor morbidity. As 3D printing technique has been advanced, it is useful to manufacture custom-made implant for skull reconstruction.

• Archives of Plastic Surgery
• /
• v.42 no.4
• /
• pp.424-430
• /
• 2015

Background Reconstruction of combined orbital floor and medial wall fractures with a comminuted inferomedial strut (IMS) is challenging and requires careful practice. We present our surgical strategy and postoperative outcomes. Methods We divided 74 patients who underwent the reconstruction of the orbital floor and medial wall concomitantly into a comminuted IMS group (41 patients) and non-comminuted IMS group (33 patients). In the comminuted IMS group, we first reconstructed the floor stably and then the medial wall by using separate implant pieces. In the non-comminuted IMS group, we reconstructed the floor and the medial wall with a single large implant. Results In the follow-up of 6 to 65 months, most patients with diplopia improved in the first-week except one, who eventually improved at 1 year. All patients with an EOM limitation improved during the first month of follow-up. Enophthalmos (displacement, 2 mm) was observed in two patients. The orbit volume measured on the CT scans was statistically significantly restored in both groups. No complications related to the surgery were observed. Conclusions We recommend the reconstruction of orbit walls in the comminuted IMS group by using the following surgical strategy: usage of multiple pieces of rigid implants instead of one large implant, sequential repair first of the floor and then of the medial wall, and a focus on the reconstruction of key areas. Our strategy of step-by-step reconstruction has the benefits of easy repair, less surgical trauma, and minimal stress to the surgeon.

• Archives of Plastic Surgery
• /
• v.42 no.4
• /
• pp.446-452
• /
• 2015

Background Various techniques are used for performing breast reduction. Wise-pattern and vertical scar techniques are the most commonly employed approaches. However, a vertical scar in the mid-lower breast is prominent and aesthetically less pleasant. In contrast, a semicircular horizontal approach does not leave a vertical scar in the mid breast and transverse scars can be hidden in the inframammary fold. In this paper, we describe the experiences and results of semicircular horizontal breast reductions performed by a single surgeon. Methods Between September 1996 and October 2013, our senior author used this technique in 38 cases in the US and at our institution. We used a superiorly based semicircular incision, where the upper skin paddle was pulled down to the inframammary fold with the nipple-areola complex pulled through the keyhole. Results The average total reduction per breast was 584 g, ranging from 286 to 794 g. The inferior longitudinal pedicle was used in all the cases. The average reduction of the distance from the sternal notch to the nipple was 13 cm (range, 11-15 cm). The mean decrease in the bra cup size was 1.7 cup sizes (range, a decrease of 1 to 3). We obtained very satisfactory results with a less noticeable scar, no complication such as necrosis of the nipple or the skin flap, wound infection, aseptic necrosis of the breast tissue, or wound dehiscence. One patient had a small hematoma that resolved spontaneously. Conclusions This technique is straightforward and easy to learn, and offers a safe, effective, and predictable way for treating mammary hypertrophy.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.5
• /
• pp.318-323
• /
• 2017

Objectives: Mandibular angle reduction or reduction genioplasty is a routine well-known facial contouring surgery that reduces the width of the lower face resulting in an oval shaped face. During the intraoral resection of the mandibular angle or chin using an oscillating saw, unexpected peripheral nerve damage including inferior alveolar nerve (IAN) damage could occur. This study analyzed cases of damaged IANs during facial contouring surgery, and asked what the basic standard of care in these medical litigation-involved cases should be. Materials and Methods: We retrospectively reviewed a total of 28 patients with IAN damage after mandibular contouring from August 2008 to July 2015. Most of the patients did not have an antipathy to medical staff because they wanted their faces to be ovoid shaped. We summarized three representative cases according to each patient's perceptions and different operation procedures under the approvement by the Institutional Review Board of Seoul National University. Results: Most of the patients did not want to receive any further operations not due to fear of an operation but because of the changes in their facial appearance. Thus, their fear may be due to a desire for a better perfect outcome, and to avoid unsolicited patient complaints related litigation. Conclusion: This article analyzed representative IAN cutting cases that occurred during mandibular contouring esthetic surgery and evaluated a questionnaire on the standard of care for the desired patient outcomes and the specialized surgeon's position with respect to legal liability.

• PNF and Movement
• /
• v.16 no.2
• /
• pp.169-178
• /
• 2018

Purpose: This study aimed to investigate the effect of angular joint mobilization (AJM) on the shoulder pain, range of motion, and functional improvement in a patient with shoulder adhesive capsulitis. Methods: The patient diagnosed with right shoulder adhesive capsulitis by an orthopedic surgeon was a 60-year-old male, right hand/arm dominant, with a height of 175 cm and weight of 75 kg. The patient received 12 sessions of AJM once or twice per week for eight weeks. AJM was applied for 5 min each of flexion, abduction, external rotation, internal rotation, for a total of 20 min per session. The visual analog scale, the goniometer, and the Oxford shoulder score were used to measure pain, range of motion, and shoulder pain & disability index, respectively. Results: After all the treatments, the pain decreased from 6 to 2 points. The range of motion increased in flexion by $54.3^{\circ}$ from $125^{\circ}$ to $179.3^{\circ}$, abduction by $38^{\circ}$ from $140^{\circ}$ to $178^{\circ}$, external rotation by $54.4^{\circ}$ from $30.3^{\circ}$ to $84.7^{\circ}$, and internal rotation by $25^{\circ}$ from $45^{\circ}$ to $70^{\circ}$. The shoulder disability index decreased from 33 points to 17 points. Conclusion: This study found that AJM has a positive effect on the improvement of shoulder pain, range of motion, and function in a patient with shoulder adhesive capsulitis. Further studies on AJM are needed in the future.

• Journal of Convergence Society for SMB
• /
• v.4 no.1
• /
• pp.55-62
• /
• 2014

Wireless capsule endoscopy (WCE) was one of the most influential bio-medical electronic technologies to be developed at the beginning of the century. In comparison to traditional endoscopic diagnosis, this application is characterized as non-invasive and low-risk, thereby providing surgeons with a new alternative for inspecting the entire gastrointestinal (GI) track in a much more user friendly way. Apart from regular hardware upgrades, the frontier of WCE research basically lies in the miniaturization of the capsule and in active locomotion. In order to overcome the intrinsic drawback of current commercialized WCE products, which is that locomotion is generally a function of natural peristalsis, active locomotion is proposed as a series of strategies used to effectively navigate the device into different organs and conduct therapeutic functions within targeted human tissues. Reviews of several novel designs with respect to this aspect of research will be discussed in this article.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.3
• /
• pp.238-247
• /
• 2005

The placement of different graft materials and/or the use of occlusive membranes to cover the extraction socket entrance are techniques aimed at reducing alveolar ridge resorption and enhancing bone formation. However, in spite of its clinical advantage, the use of graft materials in fresh extraction socket has been questioned because particles of the grafted material have been found in alveolar sockets with fibrous union. The purposes of this study were to evaluate whether alveolar ridge resorption following tooth extraction could be reduced and bone formation could be enhanced by the application of absorbable gelatin spongy or gelatin spongy soaked with platelet rich plasma(PRP) used as a space filler in clinical and radiographic aspects. Eighty patients who were scheduled for extraction of both third molars were participated and carried out by one experienced surgeon. Following extraction of teeth, one extracted socket were treated with gelatin spongy as an experimental group A and the other were treated with gelatin spongy and PRP as an experimental group B. The routine extracted socket were healed without any treatment as a control group. From the period of extraction to 12 weeks postoperatively, we examined the clinical course and radiographic evaluation on socket at regular interval. Both experimental groups showed faster wound healing process than control clinically. Vertical gingival height of the extraction socket were less changed statistically in both experimental groups than control. The horizontal width change of the extraction socket were not significant statistically in any group. Radiographic changes of the alveolar bone height were less changed in both experimental groups and bone density were showed higher than control. There were a little difference between experimental group A and B. In conclusion, absorbable gelatin sponge and with PRP were considered as having preservation effects of extraction socket and stimulation of bone formation process after extraction.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.5.1-5.5
• /
• 2016

Background: This study clinically evaluated the effect of botulinum toxin type A (BTX-A) in the temporomandibular disorder (TMD) treatment using Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD). Methods: A total of 21 TMD patients were recruited to be treated with BTX-A injections on the bilateral masseter and temporalis muscles and were followed up by an oral and maxillofacial surgeon highly experienced in the TMD treatment. For each patient, diagnostic data gathering were conducted according to the RDC/TMD. Characteristic pain intensity, disability points, chronic pain grade, depression index, and grade of nonspecific physical symptoms were evaluated. Wilcoxon signed-rank test was applied for statistical analysis. Results: The results showed that more than half of the participants (85.7 %) had parafunctional oral habits such as bruxism or clenching. In comparison between pre- and post-treatment results, graded pain score, characteristic pain intensity, disability points, chronic pain grade, and grade of nonspecific physical symptoms showed statistically significant differences after the BTX-A injection therapy (p < 0.05). Most patients experienced collective decrease in clinical manifestations of TMD including pain relief and improved masticatory functions after the treatment. Conclusions: Within the limitation of our study, BTX-A injections in masticatory musculatures of TMD patients could be considered as a useful option for controlling complex TMD and helping its associated symptoms.