• Title/Summary/Keyword: surface-active substances

Search Result 32, Processing Time 0.022 seconds

Emulsifying Properties and Oxidative Stability of Purified Surface-Active Substances from Defatted Rapeseed Cake Extract (탈지 유채박 중 표면활성정제물의 유화특성 및 산화 안정도에 관한 연구)

  • Kim, San-Seong;Lee, Eui-Seok;Lee, Ki-Teak;Hong, Soon-Taek
    • Journal of the Korean Applied Science and Technology
    • /
    • v.33 no.1
    • /
    • pp.155-167
    • /
    • 2016
  • Surface-active substances in defatted rapeseed cake were obtained using a supercritical fluid extraction method. Then, it was purified by removing sinapine in the extract through a series of steps using a mixed solvent: diethyl ether and ethyl acetate (1:1, v/v). Emulsifying properties of purified surface-active substances were investigated, including fat globule size, zeta potentials and creaming stability and its antioxidant activity in emulsion systems were also studied by peroxide value and $^1H$-NMR spectrum. It was found that fat globules in emulsions with purified surface-active substances were much smaller than ones with the unpurified. In addition, as pH of the emulsion lowered and with increasing NaCl concentration in the emulsion, they were observed to increase, which led to worse creaming stability. These properties were reflected in changes of zeta potentials of emulsions. The oxidative stability was better in emulsions with purified surface-active substances than ones with Tween 20 or commercial lecithin, possibly resulted from the existence of sinapic acid in the extract. It was concluded that purified surface-active substances from defatted rapeseed cake could be simultaneously used as emulsifier and antioxidant agent in emulsion system.

Influence of Interface Active substances(Ionic and Amphoteric) on Chemical property and Streaming Electrification of Transformer Oil (이온성 및 양성 계면 활성제가 변압기유의 화학적 특성 및 유동대전에 미치는 영향)

  • 김용운;이덕출
    • Electrical & Electronic Materials
    • /
    • v.10 no.7
    • /
    • pp.719-726
    • /
    • 1997
  • This research was conducted to analyze the change of surface tension, viscosity, streaming current and conductivity of transformer oil when it were injected with the interface active substances.(anionic:S-111, cationic:S-121, amphoteric:S-131) The changes properties of the surface tension and viscosity of the oil which were injected with the interface active substances were divided into the changes area and the minimum reduction area. The surface tension and viscosity of the oil which were injected with three different kinds of interface active substances showed remarkable change at the point where the concentration of the substance in anionic, in cationic and in amphoteric were 100[ppm], 10[ppm] and 1[ppm] respectively. The streaming current and conductivity of the same sample oil were also changed at the same densities of the surface tension and viscosity. For this factor, it was possibile for us to interpret the mechanism of the streaming current and conductivity. Therefore the interface active substances of the three kinds were injected into the oil within the limit of optimal volume, prevention effects of electrification were showed more excellence than unmixed insulating oil.

  • PDF

The Effect of Surface Environment on the Mechanism in Oblique Cutting (3차원 절삭에서 표면환경이 절삭기구에 미치는 영향)

  • Seo, Nam-Seob
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.1 no.2
    • /
    • pp.24-32
    • /
    • 1984
  • The object of the study is to discuss the effect of magic ink as a surface active substance on the mechanism of chip formation in oblique cutting. The Rehbinder effect has been known as a phenomenon that the mechanical strength reduces when the metal is coated with some surface active substances. In order to interpret these surface effects defined by Rehbinder, the influence on the shear strength of shear plane by coating surface active substances, cutting force by the depth of cut, surface roughness and hardness ratio were observed. The results are as follows: 1. By coating the magic ink on free surface of the forming chip, the effective shear angle increases, and the cuttinbg force and the deformed chip thickness decreases. 2. With the large inclination angle the effective shear angle increases, and the specific cutting force and the friction angle decrease. 3. Cutting of the coated surface improves the surface roughness and the hardness ratio drops, which means another Rehbinder effect.

  • PDF

The Effect of Nonionic Interface Activation Substances in Reduction Phenomenon of Streaming electrification (유동대전 감소현상에 미치는 비이온성 계면활성제의 효과)

  • Kim, Y.W.;Chung, K.H.;Yoo, K.M.;Yoo, J.H.;Lee, E.H.;Lee, D.C.
    • Proceedings of the KIEE Conference
    • /
    • 1998.07d
    • /
    • pp.1410-1412
    • /
    • 1998
  • The purpose of this study is to find the way to prevent the electrostatics from the interface of liquid and solid by adding interface active substances to the insulating oil with concentration. As results, The streaming current, surface tension, and viscosity decreased and conductivity increased at the higher point than the c.m.c. which resulted from, the adding of the interface active substances.

  • PDF

Extraction of Surface-Active Substances from Defatted Rice Bran by Supercritical Carbon Dioxide (초임계 CO2유체 추출법을 이용한 탈지미강 중 표면활성물질 추출의 최적화)

  • Lee, Hyong-Ju;Lee, Eui-Suk;Hong, Soon-Taek
    • Food Engineering Progress
    • /
    • v.15 no.2
    • /
    • pp.175-181
    • /
    • 2011
  • By using supercritical carbon dioxide fluid, an attempt was made to extract surface-active substances from defatted rice bran. Extraction was carried out according to D-optimal design and results were analyzed by response surface methodology to establish optimum condition. It was found that pressure, temperature and co-solvent (ethanol) influenced in a different extent on the extraction efficiency (i.e., yield and interfacial tension) of surface-active substances. Among them, co-solvent was found to be a major influencing factor, where maximum yield (2.62%) was observed at the highest content (250 g). In addition, it also affected most on the interfacial tension at the oil-water interface but in this case the lowest interfacial tension value (9.51 mN/m) was found when added lowest (50 g). In conclusion, it was estimated that the optimum extraction condition was to be pressure 350bar, temperature $62^{\circ}C$ and co-solvent content 50 g in this study, where extraction yield was 0.69% and interfacial tension to be 10.1 mN/m.

The Influence of Skin surface temperature on Transdermal Absorption of Active Substances and Changes in Skin Condition (피부표면온도가 유효물질 경피 흡수 및 피부 상태변화에 미치는 영향)

  • Kwon, Hye-Jin;Han, Sa-Ra;Jung, Na-Seul
    • Journal of the Korean Applied Science and Technology
    • /
    • v.36 no.1
    • /
    • pp.299-304
    • /
    • 2019
  • This study was conducted to investigate the effects of skin surface temperature on transdermal absorption of active substances and changes in skin condition. A transdermal absorption test was conducted using an emulsion containing 10% heat-resistant niacinamide, and the same emulsion was used in a clinical trial to test the thermal effects. As a result, absorption was found to be 2 times greater at 10 minutes and 3 times greater at 15 minutes after application at $42^{\circ}C$ than that of compared to normal skin temperature. During the clinical evaluation on skin, no clinical subjects showed any specific adverse reactions, while moisture and oiliness showed statistically significant effects at higher temperatures. Based on these results, it was confirmed that thermal warmer improves the absorption of active substances and had a positive effect on skin condition. It is deemed that this study will provide a preliminary data to support the development of various beauty devices using heat.

Effects of Drugs on the Stability of Phospholipid Liposomal Membranes (수종 약물이 리포솜 지질막의 안정성에 미치는 영향)

  • Kim, Min;Han, Suk-Kyu;Kim, Chong-Kook
    • YAKHAK HOEJI
    • /
    • v.38 no.6
    • /
    • pp.637-645
    • /
    • 1994
  • The effect of various drugs on the stability of the liposomal membrane of phosphatidylcholine and cholesterol was studied, employing the fluorescence self-quenching method. Calcein was entrapped into the phospholipid small unilamellar vesicles and the leakage of the fluorescence probe was monitored on adding the drug to the system. The results of the experiments showed that phenothiazine derivatives, some potent local anesthetics and surface active agents were very effective in inducing the leakage of calcein from the liposome. The leakage-inducing activity of these drug substances has been ascribed to their surface activity and the perturbation of the liposomal membrane by these substances. On the other hand drug substance with low surface activity or without amphiphilic moieties did not show any effect or only small effect on the leakage of calcein from the liposomes. The effect of lipid concentration on the stability of the liposomes was also investigated to show that the higher concentrations of lipid more drug was required to induce the leakage. The effect of surface charges of vesicles was also studied, and the results showed that the charge on the liposomes enhanced the stability of the liposomes against the leakage-inducing activity of these drug substances.

  • PDF

Characterization of Antimicrobial Polymeric Films for Food Packaging Applications (식품 포장용 항균 기능성 고분자 필름의 특성 및 평가)

  • 이주원;홍석인;손석민;장윤희
    • Food Science and Preservation
    • /
    • v.10 no.4
    • /
    • pp.574-583
    • /
    • 2003
  • There have been a lot of research efforts on development of active food packaging structures and materials in the form of plastic films and containers, along with investigating novel polymers and bioactive compounds for packaging purpose, in order to improve storage stability and safety of foods during distribution and sale. Recently, great interests focus on antimicrobial package films, as an active packaging system, made from synthetic plastic polymer% and natural biopolymers containing various antimicrobial substances for food packaging applications. In this active system, substances are slowly released onto the food surface. However, antimicrobial activity as well as physical properties of the films can be significantly influenced by several factors such as polymer matrix, antimicrobial compounds, and interactions between polymers and compounds. Thus, this study reviews present status of antimicrobial food packaging films in overall performance aspects including types of polymers and active substances, test for antimicrobial activity, and changes in mechanical and antimicrobial properties by preparation method.

Antifungal Activities of Streptomyces blastmyceticus Strain 12-6 Against Plant Pathogenic Fungi

  • Kim, Yeon Ju;Kim, Jae-heon;Rho, Jae-Young
    • Mycobiology
    • /
    • v.47 no.3
    • /
    • pp.329-334
    • /
    • 2019
  • Streptomyces blastmyceticus strain 12-6 was isolated from a forest soil sample of Cheonan area on the basis of strong antifungal activities against plant pathogenic fungi. Butanol extracts of the cultural filtrates were active against C. acutatum, C. coccodes, C. gloeosporioides, F. oxysporum, and T. roseum. Active fractions were prepared by thin layer chromatography using silica gel plate; 12-6-2 ($R_f$ 0.36), 12-6-3 ($R_f$ 0.44). Scanning electron microscopy showed that the active fractions caused a change in surface texture of fungal spores from smooth surface to wrinkled surface. The lethal effect on the spores of the active fractions varied from 56% to 100%. It was shown that the spores of C. acutatum were more sensitive to the antifungal fractions than the spores of F. oxysporum. Fluorescence staining using TOTO-1 indicated that the antifungal fractions could make the spores more sensitive to the fluorescence dye. Thus, it was suggested that antifungal agents prepared in this study exhibited the antifungal activity by damaging the plasma membrane of both fungal spores and hyphae. Identification of antifungal agents in the active fraction using GC-MS analysis revealed the presence of cyclo-(Leu-Pro) and 9-octadecenamide as major components that have already been known as antifungal substances.

Extractions of Surface-Active Substances from Defatted Rapeseed Meal (Brassica napus L.) by Supercritical Carbon Dioxide (초임계 CO2 유체 추출법을 이용한 탈지 유채박 중 표면활성물질 추출의 최적화)

  • Kim, Jeong-Won;Jeong, Yong-Seon;Gil, Na-Young;Lee, Eui-Seok;Lee, Yong-Hwa;Jang, Young-Seok;Lee, Ki-Teak;Hong, Soon-Taek
    • The Korean Journal of Food And Nutrition
    • /
    • v.26 no.4
    • /
    • pp.831-840
    • /
    • 2013
  • In this study, an attempt is being made to extract surface-active substances from defatted rapeseed cakes by supercritical carbon dioxide fluid. Independent variables for the extraction process, being formulated by D-optimal design, are pressure (150~350 bar), temperature ($33{\sim}65^{\circ}C$ and co-solvent (ethanol, 50~250 g). The dependent variables of the extraction yield, the content of neutral lipids, phospholipids and glycolipids in the extracts were analyzed upon the results through the response surface methodology. As for the extraction yield, it was found to increase with increasing independent variables, among which the co-solvent proved to be a major influencing parameter. Similar trends were found for the content of surface-active substances (i.e, phospholipids and glycolipids) in the extracts, except for the content of neutral lipids. Regression equations were suggested to coincide well with the results from the experiments. Extraction conditions are being optimized to maximize the extraction yields, the content of phospholipids, and glycolipids were 350 bar (pressure), $65^{\circ}C$ (temperature) and 228.55 g (co-solvent), respectively.