The effect of application of dentin bonding agent to the exposed dentin on the intradental nerve activity (INA), dentinal fluid movement and sealing of the dentinal tubules, was investigated in this study. The INA was recorded from the single pulp nerve unit dissected from the inferior alveolar nerve. And specimen of dentin was observed by SEM. Dentinal fluid 'movement through exposed dentin surface was measured before and after the application of dentin bonding agent. 1. Eight Ao-fiber units (conduction velocity: $8.0{\pm}4.0m$/sec) were identified. 4M NaCl evoked an irregular burst of action potentials which ceased immediately after washing. 2. In 4 $A{\delta}$-fiber units, appliction of All Bond 2 completely abolished the INA induced by 4M NaCl. Also, application of Scotchbond Multipurpose(SBMP) totally abolished the INA induced by 4M NaCl in 4 $A{\delta}$-fiber units. 3. Before the application of dentin bonding agent, outward dentinal fluid movement of $10.2{\pm}5.7\;pl{\cdot}s^{-1}{\cdot}mm^{-2}$ was obsered. But after the application of dentin bonding agent the movement of dentinal fluid was stopped. 4. The gap width of 2-$3{\mu}m$ was formed between exposed dentin and adhesive resin in the specimens applied with dentin bonding agents of All Bone 2 and SBMP. But the formation of hybrid layer and the penetration of resin into were dentinal tubules were not clearly observed in interface between dentin and adhesive resin.
This study focused on bean-juice treatment method which have dyeing property to indigo, yellow soil, sappan wood, cochineal and also on the possibility of applying to mordanting. This is different from the active mordanting using chemicals. Natural mordants with development of dyeing are not harmful, also are the medicines for disease. Limestone and ash neutralize the acidic soil. bean-juice protein adhere to cellulose surface and change the physical properties of protein so that coloring of dye is better than before and film non-soluble in water is made. Therefore the color made from bean-juice process lasts after washing. This study try to show one of the ways to improve the current method using the heavy metal which can have bad effects for environment and human being. Bean-juice(raw bean, heated bean) treatment method can be the way to fix the natural dyeing problem of bad dyeing. Bean-juice had been treated under various condition with pre-treatment, post-treatment and raw bean, heated bean. Following results are obtained in this study. In the case of Indigo dyeing, pre-treatment of heated bean shows the biggest difference of color. In the case of yellow soil dyeing, pre-treatment of raw bean-juice shows the biggest gap of color. Pre-treatment of heated bean in sappan wood dyeing case and post-treatment of raw bean show bigger color difference than pre-treatment of raw bean. In cochineal dyeing, raw bean pre-treatment shows the biggest color difference.
The natural dyeing of cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing are $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics were dyed in pre-mordanting. The K/S value of dyeing fabrics could be increased with repetitive dyeing and mordanting. Compared to untreated dyed fabrics, the K/ S values of fabrics which had been treated with soybean milk, chitosan and gall nut tannin were increased. The changed surface colors of fabrics that were treated with soybean milk, chitosan and gall nut tannin were Y, YR and achromatic colors. Fabrics dyed with alkaline water extract showed reddish color. Sn-mordanted fabrics dyed with acidic water extract showed vivid yellowish color, and Cu-mordanted fabrics dyed with ethanol extract showed yellowish green color. In case of Sn-mordanted fabrics, the washing fastness was level 4. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness was better in dry rubbing than in wet rubbing of the fabrics. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the powder of guava leaf extract and the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. All dyed fabrics showed higher deodorization and UV protection rate than control fabric.
In this study, the dyeing conditions(temperature, time, concentration) are changed from various conditions on wool fabrics by using corydalis tuber extract in order to develop new natural dyes. The purpose of this study is to improve the dyeability, color fastness, and functionality and to derive optimal dyeing conditions by comparing and analyzing the changes of K/S values and surface color by dyeing pH changes, mordant method, and mordant type. As a result of the experiment, the optimum dyeing condition of the wool fabrics is shown dyeing temperature:$80^{\circ}C$, dyeing time:90min, dyeing concentration:100%. The dyeability by pH variants of corydalis tuber extract indicates that K/S values is higher alkaline than acidic. The mordant method of corydalis tuber extract showed pre-mordant has high K/S values. In terms of color fastness, marked improvement has not been shown despite of mordant treatment on wool fabrics. In particular, color change of color fastness to washing, color fastness to light indicates the low fastness. In addition, the functionality such as antibacterial activities and deodorization can be given at dyeing with corydalis tuber extract thus it is expected to be applied to underwear or apparel products for the elderly and infirm and children with weak skin that required high functionality.
New process for the preparation of the artificially soild cloth (ASC) used for detergency evaluation was developed and its detergency was also studied. ASC was prepared by the dipping of cotton cloth in the water in which oily soil, protein (gelatine), carbon black and clay had been dispersed. The clay used for this ASC was red yellowish soil around Mt. Kumjung and was a typical soil in Pusan area. Adhesive status of soil at prepared ASc was examined by an electron microscope, and crystallyzation and color change of used clay were evaluated with the determination of X-ray diffraction and surface reflectance. For the evaluation of detergency by the washing with commercial and model detergents, the behavior of soil removal from this ASC comparing with naturally soiled collar cloth was examined. Those results are summerized as followings; 1) Adhesive ststus of soil at prepared ASc was very similar to that of naturally soiled collar cloth. 2) A crystalline of clay calcined at $800^{\circ}C$ was disappeared in part and color of calcined clay changed into reddish yellow by the decomposition of organic matters. 3) More uniform ASc was prepared with clay calcined at $800^{\circ}C\;that\;200^{\circ}C$ however its detergency prepared from clay calcined at $800^{\circ}C$ was poor 4) A significant relationship between the content of inorganic matter in ASc and K/S value was found, however no significant result between the content of protein contaminated and K/S value was observed. 5) Detergency of prepared ASc had a very similar to that of naturally soiled collar cloh.
본 연구에서는 콘크리트 적용 저품질 순환골재의 콘크리트 적용을 위하여 공학적 특성을 평가 하였다. 이를 위해서 저품질 순환골재의 세척유무에 따라서 골재 치환율을 30%, 60%, 100%로 콘크리트 제작하여 실험하였으며, 성능평가를 위하여 제작된 순환골재 사용 콘크리트의 압축강도, 흡수율, 표면전기저항, 초음파속도, 염소이온침투저항성 평가를 실시하였다. 세척한 저품질 순환골재의 경우 30% 치환시 천연골재와 유사한 결과를 모든 시험에서 나타내었다. 또한 60%를 치환한 콘크리트에서도 천연골재와 유사한 성능을 나타내는 것으로 확인되었다. 그러나 100%의 골재를 사용하는 것은 천연 골재 보다 다소 낮은 결과 값을 나타내었다. 반면 세척을 하지 않은 저품질 순환골재의 경우는 치환율에 관계없이 전체적으로 천연골재보다 좋지 않은 결과를 나타내었다. 특히 내구성 평가의 척도로 평가한 염소이온침투저항성 평가에서는 초기의 경우 매우 높음의 결과를 나타내었으며, 28일 재령에서도 보통 수준의 저항성을 나타내어 세척 순환골재와 약 2배 정도의 차이를 나타내었다. 따라서, 저품질 순환골재의 콘크리트 적용에 있어서 골재의 세척유무에 따라서 성능이 변화하는 것을 확인하였다.
Purpose: Standards of alloy for porcelain fused to metal crown be classified by metallic factor and biological factor. Metallic factors consist of stability of alloy composition and mechanical strength and surface characteristics for chemical bond. Biological factors be considered properties of metallic elements and problems originated by toxicity and hypersensitive reaction. Alloys considered such controversial points are the most suitable alloy for dental instrument. Method: Alloys added Be and Nb using Ni-Cr alloy which has been widely used for dental instrument be selected and classified experimental group. Non-addition Be and Nb to Ni-Cr alloy classify control group and addition Be alloy is Be-experimental group, addition Nb alloy is Nb-experimental group. Specimens for cytotoxicity analysis gave effect to washing and sterilization. and then made an experiment on elution with cell medium after disinfection. It conducted specimens within cell medium with 24hours, 48hours, 72hours, respectively. It cultured human dermal fibroblast(HDF) using cell medium for cytotoxicity test and then investigated elution rate through spectroscopic analysis by MTT-assay. Result: As results of cytotoxicity test by MTT-assay, cultured cell rate of VII measured more low numerical value within elution medium for 24hours focused on control group. Also, cultured cell rate of K3 alloys observed low value for 48hours, 72hours than value of control group. Conclusion: According to final result that synthesize above results, Ni-Cr alloy added Be and Ni has little difference in Cytotoxicity by MTT-assay.
방전플라즈마 소결법을 적용하여 탄화붕소 세라믹스를 제조하여 그 소결 특성, 미세 구조 및 기계적 특성을 평가하였다. 탄화붕소의 소결에 방전플라즈마 소결법을 적용하여 소결 조제의 첨가 없이 전통적인 소결법보다 낮은 온도에서 99% 이상의 완전 치밀화된 소결체를 제작할 수 있었으며, 탄화붕소 분말의 메탄을 세척을 통하여 분말 표면에 형성되어 있는 $B_2O_3$ 상을 사전에 제거함으로써 결정립의 조대화를 방지하여 균일한 미세구조의 형성을 유도할 수 있었으며 결과적으로 탄화붕소 소결체의 기계적 특성을 향상시킬 수 있었다. 특히 파괴인성의 경우 메탄을 세척을 통하여 30% 이상의 물성 향상을 달성하였다.
A carbonaceous sorbent was prepared from rice husk via sulphuric acid treatment. After preparation and washing, the wet carbon with moisture content 85% was used in its wet status in this study due to its higher reactivity towards Cr(VI) than the dry carbon. The interaction of Cr(VI) and the carbon was studied and two processes were investigated in terms of kinetics and equilibrium namely Cr(VI) removal and chromium sorption. Cr(VI) removal and chromium sorption were studied at various initial pH (1.6-7), for initial Cr(VI) concentration (100 mg/l). At equilibrium, maximum Cr(VI) removal occurred at low initial pH (1.6-2) where, Cr(III) was the only available chromium species in solution. Cr(VI) removal, at such low pH, was related to the reduction to Cr(III). Maximum chromium sorption (60.5 mg/g) occurred at initial pH 2.8 and a rise in the final pH was recorded for all initial pH studied. For the kinetic experiments, approximate equilibrium was reached in 60-100 hr. Cr(VI) removal data, at initial pH 1.6-2.4, fit well pseudo first order model but did not fit pseudo second order model. At initial pH 2.6-7, Cr(VI) removal data did not fit, anymore, pseudo first order model, but fit well pseudo second order model instead. The change in the order of Cr(VI) removal process takes place in the pH range 2.4-2.6 under the experimental conditions. Other two models were tested for the kinetics of chromium sorption with the data fitting well pseudo second order model in the whole range of pH. An increase in cation exchange capacity, sorbent acidity and base neutralization capacity was recorded for the carbon sorbent after the interaction with acidified Cr(VI) indicating the oxidation processes on the carbon surface accompanying Cr(VI) reduction.
Since the 1960s, semiconductor packaging technology has developed into electrical joining techniques using lead frames or C4 bumps using tin-lead solder compositions based on traditional reflow processes. To meet the demands of a highly integrated semiconductor device, high reliability, high productivity, and an eco-friendly simplified process, packaging technology was required to use new materials and processes such as lead-free solder, epoxy-based non cleaning interconnection material, and laser based high-speed processes. For next generation semiconductor packaging, the study status of two epoxy-based interconnection materials such as fluxing and hybrid underfills along with a laser-assisted bonding process were introduced for fine pitch semiconductor applications. The fluxing underfill is a solvent-free and non-washing epoxy-based material, which combines the underfill role and fluxing function of the Surface Mounting Technology (SMT) process. The hybrid underfill is a mixture of the above fluxing underfill and lead-free solder powder. For low-heat-resistant substrate applications such as polyethylene terephthalate (PET) and high productivity, laser-assisted bonding technology is introduced with two epoxy-based underfill materials. Fluxing and hybrid underfills as next-generation semiconductor packaging materials along with laser-assisted bonding as a new process are expected to play an active role in next-generation large displays and Augmented Reality (AR) and Virtual Reality (VR) markets.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.