• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.192-195
• /
• 2004

Products of gridded surface wind and windstress vectors over the world ocean have been constructed by satellite scatterometer data with highly temporal and spatial resolutions. Even if the ADEOS-II/SeaWinds has supplied surface wind data only for short duration in Apr. to Oct. 2003 to us, it permits us to construct a product with higher resolution together with the Qscat/SeaWinds. In addition to our basic product with its resolution of $1^{\circ}\times1^{\circ}$ in space and daily in time, we try to construct products with $1/2^{\circ}\times1/2^{\circ}$ and semi- and quarter-daily resolution. These products are validated by inter-comparison with in-situ data (TAO and NDBC buoys), and also compared with numerical weather prediction(NWP) ones (NCEP reanalysis). Result reveals that our product has higher reliability in the study area than the NCEP's. For the open ocean regions in the middle and high latitudes where there are no in-situ data, we find that there are clear differences between them. Especially in the southern westerly region of 400-600S, the' wind-stress magnitudes by the NCEP are significantly larger than the others, suggesting that they are overestimated. We also calculate wind-stress curl field that is an important factor for ocean dynamics and focus its spatial character in the northwestern Pacific around Japan. Positive curl areas are found to cover from southwest to northeast in our focus region and almost correspond to the Kuroshio path. It is suggested that the vorticity field in the lower atmosphere is related to the upper oceanic one, and thus an aspect of air-sea interaction process.

• 한국항해항만학회지
• /
• 제35권10호
• /
• pp.805-810
• /
• 2011

트랜섬 선미 형상변화에 따른 후류 유동특성을 알아보기 위해 $Re=3.5{\times}103$ 및 $Re=7.0{\times}103$에서 수면하부 유동을 계측하였다. 선미형상변화에 따른 유동장 계측을 위해 2-프레임 그레이레벨 상호상관 PIV기법을 이용하여 분석하였다. 선미형상은 실선조사 결과를 바탕으로 선저와 이루는 각을 각각 $45^{\circ}$(모델 A), $90^{\circ}$(모델 B) 및 $135^{\circ}$(모델 C)를 실험에 적용하였다. 모델의 선미 침수면의 깊이는 자유 수면으로부터 40mm를 기초하였다. 레이놀즈수가 증가함에 따라, 와의 규모가 증가하고 하류로 길게 형성되는 경향을 나타냈다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.324-324
• /
• 2023

수제는 비용 대비 높은 효율을 가지는 수공 구조물로 하천과 해안에 많이 이용된다. 수제는 하천에서 식생물의 서식처, 유량 확보, 하천시설 보호 등의 목적으로 설치되며 해안에서는 해안선보호, 수심 확보 등의 다양한 목적으로 설치된다. 수제는 일반적으로 넓은 영역을 제어할 수 있도록 여러개의 군수제 형태로 설치한다. 수제설치 시 기존 하도나 수로의 흐름에 교란이 일어나는데 본류부에서는 하폭이 좁아져 수제선단부에 의한 영향으로 높은 유속이 발생되며 수제역내에서는 재순환흐름과 함께 다양한 형태의 유속분포가 형성된다. 이러한 수제에 의한 흐름은 수제 선단부의 영향으로 발생하는 흐름분리선(Separation Layer)을 기준으로 흐름중심선(Talweg Line)과 흐름분리영역(Separation area)을 만들어내며 수제역내의 재순환영역에서 완화된 유속은 제방을 침식으로부터 보호하며 식생물의 서식처를 제공한다. 기존의 연구는 대부분 단일수제에 대한 연구가 수행되었으며 연속된 군수제에 대한 연구는 다소 제한된 조건에서 수행되었다. 이에 본 연구에서는 연속된 수제가 설치된 경우 수리실험을 통해 수제주변의 흐름 변화 특성을 분석하였다. 수리실험은 30.0m(L')×1.52m(B')×1.10m(H')의 직선 개수로에 050m(l)×0.10m(b)×0.25m(h)의 수제를 수로측면을 따라 연속적으로 배열하여 설치하였다. 실험은 수심, 유량, 수제설치간격을 변화시키면서 수행했으며 마그네틱유속계를 사용해서 수제의 영향을 받지 않으며 벽면의 영향이 가장 적은 수로상류의 중앙지점에서 접근유속을 측정했다. 표면유속을 취득하기 위해 일반디지털카메라로 FHD(1920×1080) 해상도를 가진 영상을 각각의 조건마다 10~20분 촬영했다. 촬영된 영상을 연속된 정지영상으로 변환하고 영상해석 프로그램을 이용하여 표면유속을 도출했다. 표면영상유속계를 활용하여 도출한 결과로 각각 조건에 따라 발생하는 최대유속과 최대역방향유속, 와도(vorticity), 흐름중심선과 단면유속분포의 변화와 발생 위치를 분석했다.

• 한국대기환경학회지
• /
• 제26권5호
• /
• pp.475-489
• /
• 2010

In order to verify the enhancement of ozone and carbon monoxide (CO) during springtime in East Asia, we investigated weather conditions and data from remote sensors, air quality models, and air quality monitors. These include the geopotential height archived from the final (FNL) meteorological field, the potential vorticity and the wind velocity simulated by the Meteorological Mesoscale Model 5 (MM5), the back trajectory estimated by the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model, the total column amount of ozone and the aerosol index retrieved from the Total Ozone Mapping Spectrometer (TOMS), the total column density of CO retrieved from the Measurement of Pollution in the Troposphere (MOPITT), and the concentration of ozone and CO simulated by the Model for Ozone and Related Chemical Tracers (MOZART). In particular, the total column density of CO, which mightoriginate from the combustion of fossil fuels and the burning of biomass in China, increased in East Asia during spring 2000. In addition, the enhancement of total column amounts of ozone and CO appeared to be associated with both the upper cut-off low near 500 hPa and the frontogenesis of a surface cyclone during a weak Asian dust event. At the same time, high concentrations of ozone and CO on the Earth's surface were shown at the Seoul air quality monitoring site, located at the surface frontogenesis in Korea. It was clear that the ozone was invaded by the downward stretched vortex anomalies, which included the ozone-rich airflow, during movement and development of the cut-off low, and then there was the catalytic photochemical reaction of ozone precursors on the Earth's surface during the day. In addition, air pollutants such as CO and aerosol were tracked along both the cyclone vortex and the strong westerly as shown at the back trajectory in Seoul and Busan, respectively. Consequently, the maxima of ozone and CO between the two areas showed up differently because of the time lag between those gases, including their catalytic photochemical reactions together with the invasion from the upper troposphere, as well as the path of their transport from China during the weak Asian dust event.

• 한국항공우주학회지
• /
• 제44권10호
• /
• pp.843-852
• /
• 2016

실제 씨앗의 3차원 형상과 운동요소에 기반하여 단풍나무(Acer palmatum 종) 씨앗의 자동회전 비행을 수치적으로 해석하였다. 운동요소의 표준 값은 낙하속도는 1.26 m/s, 회전속도는 133.6 rad/s (1,276 rpm), 코닝 각은 $19.4^{\circ}$, 피치 각은 $-1.5^{\circ}$이다. 씨앗 날개의 스팬 안쪽에 위치한 컴팩트한 앞전 와류가 씨앗 날개 바람 반대면에 커다란 부압을 발생하게 하였다. 부압의 피크는 안쪽 스팬 단면 앞전 부근에 발생하였다. 본 연구에서 얻어진 현저한 앞전 와류로 특징되는 흐름 형태와 공기력 계수의 값은 동적 상사를 갖도록 한 로봇 씨앗에 대하여 실험적으로 측정한 자료와 잘 일치하였다. 바람 반대 영역에 발달한 나선형 와류는 씨앗 끝을 향하여 전진하고 씨앗 끝 부분에서 이곳을 지나는 흐름과 합쳐지는데, 이와 같은 흐름이 자동회전하는 단풍나무 씨앗의 안정되고 부착된 LEV를 유지하게 하는 메카니즘으로 여겨진다.

• 한국대기환경학회지
• /
• 제28권2호
• /
• pp.142-158
• /
• 2012

This paper investigates the physical and chemical characteristics of long-range transport (LRT) process of air pollutants by employing the MM5-CMAQ and its comparison with local emission dominant (LED) case over northeast Asia. We first classified high air pollution days into LRT and LED cases based on the synoptic meteorological variables of vorticity and geostrophic wind speed/direction at a geopotential level of over 850hPa. LRT cases are further categorized into three types of transport patterns (LRT-I-III) according to the air mass pathways from source regions. LRT-I-III are originated from northern, central, and southern China, respectively, identified by back trajectory analysis. Three LRT-I-III groups have different and unique locations of high pressure and transport pathways. The chemical characteristics showed that the simulated spatial distributions varied in terms of locations of maximum concentrations and the temporal variation of surface concentrations. The primary air pollutants such as $NO_x$, $PM_{10}$ and $SO_2$ of all of three LRT cases are well transported into Korea peninsula with different concentration levels. Of LRT cases, LRT-II has the greatest effect on air quality of Korea peninsula, followed by LRT-I and LRT-III. In comparison with LRT, the LED case shows relatively higher air pollution concentrations in general, but showed a variety of different air quality levels following the emission strength pattern. These widely varying patterns are impling the case dependent multi-directional approach for the development of indicators of long-range transport process over northeast Asia.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.39-42
• /
• 2003

Leading edge extension(LEX) in a highly swept shape applied to a delta wing features the modern air-fighters. The LEX vortices generated upon the upper surface of the wing at high angle of attack enhance the lift force of the delta wing by way of increased negative suction pressure over the surfaces. The present 3-D stereo PIV includes the Identification of 2-D cross-correlation equation, stereo matching of 2-D velocity vectors of two cameras, accurate calculation of 3-D velocity vectors by homogeneous coordinate system, removal of error vectors by a statistical method followed by a continuity equation criterion and so on. A delta wing model with or without LEX was immersed in a circulating water channel. Two high-resolution, high-speed digital cameras$(1280pixel\times1024pixel)$ were used to allow the time-resolved animation work. The present dynamic stereo PIV represents the complicated vortex behavior, especially, in terms of time-dependent characteristics of the vortices at given measuring sections. Quantities such as three velocity vector components, vorticity and other flow information can be easily visualized via the 3D time-resolved post-processing to make the easy understanding of the LEX effect or vortex emerging and collapse which are important phenomena occurring in the field of delta wing aerodynamics.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1209-1219
• /
• 2003

The dynamic behaviors of the single vortex interacting with $CH_4-Air$ jet diffusion flame are investigated numerically. The numerical method is based on a predict-corrector scheme for a low Mach number flow. A two-step global reaction mechanism is adopted as a combustion model. Studies are conducted in fixed initial velocities for the three cases according as where $CO_2$ is added; (1) without dilution, (2) dilution in fuel stream and (3) dilution in oxidizer stream. A single vortex is generated by an axisymmetric jet, which is made by an impulse of a cold fuel when a flame is developed entirely in a computational domain. The simulation shows that $CO_2$ dilution in fuel stream results in somewhat larger vortex radius, and greater amount of entrainment of surrounding fluid than in other cases. Thus, the dilution of $CO_2$ in fuel stream enhances the mixing in single vortex and increases the stretching of the flame surface. The budgets of the vorticity transport equation are examined to reveal the mechanism of vortex formation when $CO_2$ is added. It is found that, in the case of $CO_2$ dilution in fuel stream, the vortex destruction due to volumetric expansion and the vortex production due to baroclinic torque are more dominant than in other cases.

• 대기
• /
• 제30권1호
• /
• pp.1-15
• /
• 2020

This study analyzed and compared development mechanisms leading to heat waves of 2016 and 2018 in Korea. The European Centre for Medium-Range Weather Forecasts Reanalysis Interim (ERA Interim) dataset and Automated Surface Observing System data are used for synoptic scale analysis. The synoptic conditions are investigated using geopotential height, temperature, equivalent potential temperature, thickness, potential vorticity, omega, outgoing longwave radiation, and blocking index, etc. Heat waves in South Korea occur in relation to Western North Pacific Subtropical High (WNPSH) pressure system which moves northwestward to East Asia during summer season. Especially in 2018, WNPSH intensified due to strong large-scale circulation associated with convective activities in the Philippine Sea, and moved farther north to Korea when compared to 2016. In addition, the Tibetan high near the tropopause settled over Northern China on top of WNPSH creating a very strong anticyclonic structure in the upper-level over the Korean Peninsula. Unlike 2018, WNPSH was weaker and centered over the East China Sea in 2016. Analysis of blocking indices show wide blocking phenomena over the North Pacific and the Eurasian continent during heat wave event in both years. The strong upper-level ridge which was positioned zonally near 60°N, made the WNPSH over the South Korea stagnant in both years. Analysis of heat wave intensity (HWI) and duration (HWD) show that HWI and HWD in 2018 was both strong leading to extreme high temperatures. In 2016 however, HWI was relatively weak compared to HWD. The longevity of HWD is attributed to atmosphere blocking in the surrounding Eurasian continent.

• Wind and Structures
• /
• 제31권3호
• /
• pp.229-240
• /
• 2020

In the present work, the main features of primary vortices and the vorticity concentrations downstream of vortex bursting in crossflow plane of a delta wing with a sweep angle of Λ=70° were investigated under the variation of the sideslip angles, β. For the pre-review of flow structures, dye visualization was conducted. In connection with a qualitative observation, a quantitative flow analysis was performed by employing Particle Image Velocimetry (PIV). The sideslip angles, β were varied with four different angles, such as 0°, 4°, 12°, and 20° while angles of attack, α were altered between 25° and 35°. This study mainly focused on the instantaneous flow features sequentially located at different crossflow planes such as x/C=0.6, 0.8 and 1.0. As a summary, time-averaged and instantaneous non-uniformity of turbulent flow structures are altered considerably resulting in non-homogeneous delta wing surface loading as a function of the sideslip angle. The vortex bursting location on the windward side of the delta wing advances towards the leading-edge point of the delta wing. The trajectory of the primary vortex on the leeward side slides towards sideways along the span of the delta wing. Besides, the uniformity of the lift coefficient, C_L over the delta wing plane was severely affected due to unbalanced distribution of buffet loading over the same plane caused by the variation of the sideslip angle, β. Consequently, dissimilarities of the leading-edge vortices result in deterioration of the mean value of the lift coefficient, C_L.