• Macromolecular Research
• /
• 제17권6호
• /
• pp.388-396
• /
• 2009

The surface properties (water sorption and repellency, adhesion) are closely related to the surface tension of polymer solids. The critical surface tension (${\gamma}_c$) and surface tension (${\gamma}_s$) of a polymer solid were estimated by the contact angle method by our quantitative imaging system. BPDA (3,3',4,4'-biphenyl tetracarboxylic dianhydride)-BAPP (1,3-Bis(4-aminophenoxy) propane) polyimide was successfully synthesized. The ${\gamma}_c$ values were analyzed by a Zisman plot, a Young-$Dupr\acute{e}$-Good-Girifalco plot, and a log ($1+cos{\theta}$) vs log ${\gamma}_L$ plot. The ${\gamma}_s$ value of BPDA-BAPE polyimide was evaluated using the geometric mean equation and our multiple regression analysis. The calculated values of ${{\gamma}_s^d$ (a dispersion component), ${{\gamma}_s^p$ (a polar component), ${{\gamma}_s^h$ (a hydrogen bonding component), and ${\gamma}_s$ were 30.79, 9.32, 0.20, and 40.31 $mN{\cdot}m^{-1}$, respectively. The ${\gamma}_s$ of BPDA-BAPP polyimide containing both a methylene group and an ether group was larger than that of the polyimide containing only a methylene group.

• 접착 및 계면
• /
• 제2권3호
• /
• pp.9-15
• /
• 2001

표면 에너지가 낮아 접착이 어려운 EVA foam을 용해도 파라미터와 표면장력이 다른 용매로 표면처리하여 표면의 상태 변화를 SEM, 접촉각 측정 등으로 조사하였으며 표면의 변화가 접착력에 미치는 영향을 고찰하였다. Zismann plot에 의해 계산된 EVA foam의 임계표면장력 (${\gamma}_{c,0}$)은 27.08 dyne/cm이었다. 용매 처리에 의해 EVA foam 표면의 형태 및 임계포면장력이 변화하였으며 EVA foam의 팽윤도가 용해도 파라미터에 의해 영향을 받는 것에 비해 표면의 변화 정도는 용매의 표면장력에 더 크게 의존하였다. 표면의 변화는 용매의 표면장력 (${\gamma}_L$)이 EVA foam의 임계표면장력 보다 낮아 wetting이 잘될수록 커지는 것으로 나타났다. 용매 처리된 EVA foam을 접착한 결과 처리하지 않은 것에 비해 접착력이 600% 이상 크게 향상되었으며, ${\gamma}_c$가 프라이머의 ${\gamma}_{L,p}$에 근접하여 ${\gamma}_c/{\gamma}_{L,p}$가 1에 가까워질수록 접착력이 증가하였다.

• Carbon letters
• /
• 제13권3호
• /
• pp.182-186
• /
• 2012

A new model and resultant equation for the coagulation of acrylonitrile monomers in precipitation polymerization are suggested in consideration of the surface tension (${\gamma}$) and cohesive energy density ($E_{CED}$). The equation was proven to be quite favorable by considering figure fittings from known surface tensions and cohesive energy densities of certain organic solvents. The relationship between scale value of surface tension (${\gamma}$/M) and cohesive energy density of monomers can be obtained by changing the coagulation bath component for effective precipitation polymerization of acrylonitrile in wet spinning.

• Nuclear Engineering and Technology
• /
• 제3권1호
• /
• pp.21-31
• /
• 1971

금속의 소성변형에 필요한 일의 일부는 전표면자유에너지 (Total Surface Free Energy)의 변화에 소모된다. 전표면자유에너지 변화는 비표면 자유에너지 (Specific Surface Free Energy)에 의해 변화하며 비표면자유에너지는 분위기에 따라 달라 진다. 열역학적규명, 체적불변율과 흡착으로 인한 두 개의 판이하게 다른 강화 혹은 약화를 초래하는 전위(Dislocation) 상호작용기구를 기반으로 금속의 소성변형으로 인한 가공경화, 응력 및 에너지에 미치는 분위기의 영향을 이론식으로 도출했다. 이론식은 진공중금속표면장력 (${\gamma}$$_{s}$), 개면장력 (${\gamma}$$_{se}$ ), 포면전위밀도($\rho$$_{s}$), 내부전위 밀도($\rho$$_{i}$)와 표면노출율(f)의 함수로 표시할 수 있었다. 이론식을 이용하여 각기 다른 분위기내에서의 금속의 기계특성을 예측 비교해봤다.다.다.

• 한국군사과학기술학회지
• /
• 제11권2호
• /
• pp.109-115
• /
• 2008

A Plastic Bonded Explosive(PBX) is mainly composed of nitramine explosive and polymer binder. The great number of serious applications of PBX requires the good adhesion between nitramine crystals and binder, which depends on the surface characteristics of a filler and binder. In the pursuit of the better design to achieve the enhanced adhesion, profound knowledge of the surface and interfacial characteristics of explosive and binder should be exploited. In this study, the influences of physicochemical properties between RDX and binders such as interfacial tension($\gamma_{SL}$), latent heat($Q_m$), and density($\rho$) on impact sensitivity of PBX were investigated. As experimental results, the major contribution factor to impact sensitivity of PBX was the interfacial tension, compare with other surface properties. The correlation coefficient of $H_{50}$ versus $\gamma_{SL}$ is 0.9932 when a polynomial regression method was used.

• 한국의류산업학회지
• /
• 제9권1호
• /
• pp.113-118
• /
• 2007

It is well recognized that the wicking of liquids in a textile fabric takes place mainly through a capillary system composed of the individual fibers. Considering typical dyeing stages, it is thought that a high dye uptake on the fabric probably depends on the wickability. Three kinds of barely water soluble ketones, acetophenone(A), 2-pentanone(2P) and 3-pentanone(3P) were separately dissolved in methanol(M) and then each was mixed with aqueous solution of C. I. Red Acid 114. Wicking heights of dyeing solutions were measured under such conditions that the effect of gravity was negligible. The result could be graphed as a series of straight lines having the form s = $kt^{1/2}$, where s was distance traveled by the solutions, t was time, and k was slope of the line. The surface tension(${\gamma}$) of the ketones had more signifcant effect on the wickability compared to the viscosity(${\eta}$) of them. The greater wickability resulted in the higher dye uptake on the fabric and the order of wickabilty was equal to that of the surface tension(${\gamma}$) and dye uptake on the fabric, A>3P>2P>M.

• 한국의류산업학회지
• /
• 제11권4호
• /
• pp.672-677
• /
• 2009

To reduce the dependence of wool dyeing on the temperature several solvents with different properties and structures were added to the dye bath of C. I. Acid Yellow 42. Nearly the same total solubility parameters(${\delta}_t$) of solvents as those of wool fiber and hydrophobic part of the dyestuff were needed to increase disaggregation of dye molecules, loosening the wool fiber and wickabilty of dyeing solution; besides, the large surface tension(${\gamma}$) value of the solvents and the well balanced values of the three-component Hansen solubility parameters such as dispersion(${\delta}_d$), polar(${\delta}_p$), and hydrogen(${\delta}_h$) bonding parameters were required. Among the added solvents dimethyl phthalate(DMP) and acetophenone(AP) were satisfied with these conditions and worked the most successfully in the low temperature wool dyeing. Their effectiveness proven by the dyeing rate and the activation energy ($E_a$) of the dyeing was in the order of DMP > AP > DBE > CH > M >NONE. In conclusion the total solubility parameters(${\delta}_t$), the three-component Hansen parameters and the surface tension(${\gamma}$) of DMP and AP could be the guidelines to select suitable solvents for low temperature wool dyeing.

• 폴리머
• /
• 제24권5호
• /
• pp.589-598
• /
• 2000

불포화 폴리에스테르(unsaturated polyester : UPE) 수지를 다가알콜 (propylene glycol : PG, neopentyl glycol : NPG)의 각 몰비를 조정하여 포화 이염기산(isophthalic acid : IPA)과 불포화 이영기산 (maleic anhydride : MA)의 혼합물로 축합반응으로 제조하였다. 고체의 표면특성을 결정짓는 임계표면장력(${\gamma}_{c}$)을 Zisman plot으로 평가하였고, 또한 수지의 구조와 물성과의 관게를 레올로지 측정으로 조사하였다. 고체 glass에 의한 (${\gamma}_{c}$)은 UPE 수지 액체들에 대해서 30.5mN${\cdot}m^{-1}$를 얻었고, PG/NPG 몰비중 NPG 함량이 증가할수록 UPE 수지 용액의 접촉각과 표면장력이 감소됨을 확인할 수 있었다. 그리고 글리콜 몰비가 다른 UPE 수지의 동적 점탄성을 측정하면 정상류 점도의 전단속도 의존성, 동적 탄성율의 각 주파수 의존성에 의해 순수한 PG보다는 NPG의 함량이 증가할수록 낮은 값을 얻을 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3805-3809
• /
• 2012

Results for molecular dynamics simulation method of small liquid drops of argon (N = 1200-14400 molecules) at 94.4 K through a Lennard-Jones intermolecular potential are presented in this paper as a preliminary study of drop systems. We have calculated the density profiles ${\rho}(r)$, and from which the liquid and gas densities ${\rho}_l$ and ${\rho}_g$, the position of the Gibbs' dividing surface $R_o$, the thickness of the interface d, and the radius of equimolar surface $R_e$ can be obtained. Next we have calculated the normal and transverse pressure tensor ${\rho}_N(r)$ and ${\rho}_T(r)$ using Irving-Kirkwood method, and from which the liquid and gas pressures ${\rho}_l$ and ${\rho}_g$, the surface tension ${\gamma}_s$, the surface of tension $R_s$, and Tolman's length ${\delta}$ can be obtained. The variation of these properties with N is applied for the validity of Laplace's equation for the pressure change and Tolman's equation for the effect of curvature on surface tension through two routes, thermodynamic and mechanical.

• Journal of Welding and Joining
• /
• 제17권1호
• /
• pp.62-70
• /
• 1999

Since various parameters including the welding conditions and material properties are involved in metal transfer, it is difficult to figure out the effects of each parameter. In this study, dimensional analysis in performed to reduce the number of the parameters and to reveal the effect of each parameter on metal transfer. Dimensionless parameters are derived based on the inertia force and surface tension, and their contributions on metal transfer are estimated by analyzing the calculated results using the volume of fluid (VOF) method. Among several dimensionless parameters, $N_{SE}(=$\mu$_{0}I^{2}/d_{w}${\gamma}$)$ which represents the ratio of the electromagnetic force to surface tension, is found to be appropriate to describe metal transfer and estimate the transition current. Predicted results of transition current and drop size are in reasonably good agreements with available experimental date which show the validity of proposed dimensional analysis.