• Computers and Concrete
• /
• 제33권5호
• /
• pp.481-496
• /
• 2024

Internal erosion around pipes can lead to the failure of earth dams through various mechanisms. This study investigates the displacement patterns in earth dam models under three different failure modes due to internal erosion, using digital image correlation (DIC) methods. Three failure modes—erosion along a pipe (FM1), pipe leakage leading to soil erosion (FM2), and erosion in a pipe due to defects (FM3)—are analyzed using two- and three-dimensional image- processing techniques. The internal displacement of the cross-sectional area and the surface displacement of the downstream slope in the dam models are monitored using an image acquisition system. Physical model tests reveal that FM1 exhibits significant displacement on the upper surface of the downstream slope, FM2 shows focused displacement around the pipe defect, and FM3 demonstrates increased displacement on the upstream slope. The variations in internal and surface displacements with time depend on the segmented area and failure mode. Analyzing the relationships between internal and surface displacements using Pearson correlation coefficients reveals various displacement patterns for the segmented areas and failure modes. Therefore, the image-based characterization methods presented in this study may be useful for analyzing the displacement distribution and behavior of earth dams around pipes, and further, for understanding and predicting their failure mechanisms.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.189-194
• /
• 2007

Kirpich formula was selected as the proper formula for calculating the concentration time at island streams. Kirpich formula can be applied for the expanded range from surface area of $0.453km^2$ and channel bed slope of $3{\sim}5%$ to surface area of $2.0km^2$ and channel bed slope of 1.5%.

• 품질경영학회지
• /
• 제19권2호
• /
• pp.17-39
• /
• 1991

In many application of response surface methodology, good estimation of the derivatives of the response function may be as important or perhaps more important than estimation of mean response. Using a graphical method, we have studied the effect of outliers, missing observations, and design augmentation with respect to the slope estimation in the response surf ace designs.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1344-1350
• /
• 2008

The slope surface at a linking road construction from a geological stratum situation and a spot investigation weathering about the base rock. We became formation the slope to very disadvantageous base rock. A stability review result confirmed report of the slope were difficult and presented the stability countermeasure. We executed the slope to the purpose to augment safely.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1386-1394
• /
• 2008

The slope-related disasters in Korea usually occur between July and September during the typhoon and localized heavy rain. This means that the rainfall is the most important factor that leads to the slope-related disasters. The slope-related disasters can happen at very short time and lead to big damage. To forecast the change of the heave of the groundwater in slope the Seep/w program was used.

• Journal of the Korean Statistical Society
• /
• 제11권1호
• /
• pp.36-44
• /
• 1982

A new design concept, called axis-slope-rotatability, is presented for the design of experiments with mixtures. This is an analogue of the Box-Hunter (1957) rotatability for second order response surface designs. By choice of design, it is possible to make the variance of the estimated slopes along the component axes constant for all axial points equidistant from the center point of the factor space. This property is called axis-slope-rotatability for mixture experiments. When the Scheffe's second degree polynomial is used, it is shown that some symmetry conditions are sufficient for axis-slope-rotatability. Several designs having this property are illustrated.

• 한국해양공학회지
• /
• 제4권1호
• /
• pp.55-61
• /
• 1990

For the tracking of three dimensional free surface motions, a method referred to as the Volume of Fluid(VOF) algorithm is extended. In order to calculate the slope of three dimensional free surface which is the most important for the advection algorithm that decides the amount of fluid from cell to cell and for the application of free surface boundary condition, a simple method utilizing two dimensional slope informations is introduced. The extended algroithm is tested by demonstrating the simulation of a propagating sinusoidal wave through the channel whose width changes abruptly.

• 한국안전학회지
• /
• 제13권3호
• /
• pp.135-142
• /
• 1998

This paper is to investigate the failure surface and modes in a soil mass by a excavation of the model ground. To study the failure surface for the excavated slope, centrifugal model tests were performed by changing the angle of the excavated slope(50, 75, $90^{\circ}$) and the ground condition($D_r$=60, 90%, dry and submerged ground). Excavation was simulated during the centrifuge tests by operating a valve that allowed the zinc chloride solvent to drain from the excavation. Results of model tests were compared with those obtained with theoretical solutions using limit equilibrium analysis method. The results of model tests show that, there is a failure to create a straight line in the low angle of excavated surface and a create a circle as the angle increases. Also, as the angle of excavated surface is increasing, the angle of the failure surface increases. The failure length in the submerged ground increases approximately 1.10~1.34 times more than that of the dry ground.

• 한국토양비료학회지
• /
• 제40권3호
• /
• pp.208-213
• /
• 2007

1985년부터 1991년까지 일 강우량 80 mm 이상일 때의 유거량 자료를 이용하여 집중강우시 물유출 양상을 구명하였다. 지표유거가 발생하는 유거 발생 최소 강우량은 지표피복과 경사장에 따라 결정되는 것으로 나타났으며 토성과 경사각에 따라서는 별 차이를 나타내지 않았다. 유거 발생 최소 강우량을 기준으로 그 이후의 유거량은 강우량에 따라 직선적으로 증가하였다. 그러나 이 때의 기울기 즉, 유거율은 토성, 지표 피복형태, 경사각, 경사장에 따라 달라졌다. 유거율은 토성이 세립질로 침투속도가느릴 수록 커졌으며 콩 재배에 비해 물흐름에 대한 저항이 작은 나지에서 컸다. 또한 유거율은 경사각의 제곱근에 비례하여 증가하였으며 경사장이 길어짐에 따라 특정값에 수렴하면서 감소하였다. 이러한 결과를 바탕으로 집중강우 시 유거량을 모사할 수 있는 식을 다음과 같이 개발하였다. $$Runoff=a(s^{0.5}+l^b)(Rainfall-80(1-e^{-bl}))------(9)$$ 이 식에서 a는 토양의 침투특성과 관련된 토양계수, b는 지표 피복의 영향을 나타내는 지표피복계수, s는 경사각(radian), l은 경사장(m)이다. a는 토성에 따라 0.5~0.6으로 나타났으며 세립질일 수록 값이 컸다. b는 피복조건에 따라 나지에서 0.06, 콩 재배시 0.5 정도로 평가되었다.

• 한국농공학회지
• /
• 제39권1호
• /
• pp.112-121
• /
• 1997

The aim of this study was to analyze the slope stability relating to the failure of cut slopes and the characteristics of stress-strain relations obtained by limit equilibrium method, finite element method, and stereographic projection method for the reinforced cut slopes. The following conclusions were made : 1.To use stereographic projection method led to little possibility to take the toppling and wedge failure while to use the other methods led to the failure. It was recommended to reduce the slope inclination from 1:1 to 1: 1.5~1 :1.8 and adopt coir mesh method to protect the slope surface. position with the horizontal displacement after final excavation moved to the excavation base. The maximum shear strain values concentrated at the excavation base indicated the possibility to induce the local failure. 3. It was recommended that the slope inclination for blast rock with the slope height larger than l0m was 1: 0.5, 1:1, and 1: 1~1 :1.5 for hard rocks, soft and ordinary rocks, and ripping and soils, respectively. 4. Berm width criteria for blast rock with the slope height larger than l0m were recommended as follow : 2~3m per 20m slope height for hard rocks, 1 ~2m per l0m slope height for soft and ordinary rocks, 1 ~ l.5m per 5m slope height for ripping and soils.